| Content |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
| Powerful, dynamic 2 x 8" Bandpass Subwoofer. Its compact dimensions permit unobtrusive placement of the subbass anywhere, either vertically or horizontally. A 2-channel power amplifier is all that is required to operate e.g. a subbass with up to 4 satellites. Sturdy MDF housing with textured finish.
Specifications 2 x 8" Bandpass Subwoofer:
- Model Name: LDSUB88
- Type: Bandpass
- Components:
- Woofer: 2 x 8" Custom Made
- Power Capacity (Cont./Peak): 2 x 100 W / 2 x 180 W
- Frequency Range: 40 Hz - 120 Hz
- SPL 1 W / 1 m: 92 dB
- Max SPL: 115 dB
- Impedance: 2 x 8 ohms
- Connectors:
- Input: Clamp-type
- Output: Clamp-type
- Cabinet Material: 15 mm MDF
- Cabinet Surface: Painting
- Dimensions: 450 x 500 x 520 mm
| MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
|
The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.
The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
| Features |
|---|
| Compact, bass reflex, 2 x 18" subwoofer system | | Very high output, response down to 35 Hz | | 138 dB max SPL, 2000 Watt AES | | Equipped with RCF high power 2 x18“, 4" voice coil neodymium woofers | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 35 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 138 dB | | | System Sensitivity: | 99 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 2000 Watt | | | Peak Power Handling: | 8000 Watt | | | Recommended Amplifier: | 4000 | | | Crossover frequencies: | Recommended 120 Hz | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 18" woofer, 4" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 900 Watts AES | | | Sensitivity: | 98 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Handles: | 2 on side | | | Pole Mount/Cap: | Yes | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 580 / 22.83 mm/inch | | | Width: | 1060 / 41.73 mm/inch | | | Depth: | 700 / 27.55 mm/inch | | | Net Weight: | 64 / 141 Kg/Lbs |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01“)
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
| Features |
|---|
| Compact, arrayable, 2 x 12" bandpass subwoofer system | | 131 dB max SPL, 800 Watt AES | | Equipped with RCF high power 2 x12“, 3" voice coil woofers | | Extensive internal bracing, 8 x M10 mounting points | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille | | Dedicated to permanent installation |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 131 dB | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 800 Watt | | | Peak Power Handling: | 2400 Watt | | | Recommended Amplifier: | 1600 | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 97 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 8 x m10 mounting points, 2 x recessed | | | Handles: | 2 seitlich | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 500 / 19.68 mm/inch | | | Width: | 650 / 25.59 mm/inch | | | Depth: | 580 / 22.83 mm/inch | | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
Reviews
There are no reviews yet.