Content | Specifications
Product type
Loudspeaker Chassis
Overall diameter
101.1 mm
Pitch Circle Diameter
92.1 mm
Cut- out Measurement
77.2 mm
Diameter of fixing holes
4.1 mm
Nominal Impedance
32 Ohm(s)
Nominal Load Capacity
35 W
Sensitivity (1 W / 1 m)
88 dB
Frequency response
150 - 20000 Hz
Voice Coil Material
Copper
Thiele & Small Parameter
Fs (Resonance Frequency)
117 Hz
Re (DC resistance)
22.43 Ohm(s)
Qms (mechanical quality)
5.87
Le (inductance of the voice coil)
0.23 mH
Qes (electrical quality)
0.85
Qts (overall quality)
0.74
Vas (equivalent volume)
0.98
BL (power factor)
6.46 T/m
Xmax (maximum displacement)
2.6 mm
Cms (elasticity of the suspension)
0.86 mm/N
Sd (membrane area)
28.6 cm²
| Weighing a mere 2 lbs., the Pro 5MRN neodymium midrange / tweeter driver features a wide usable frequency range and water resistant epoxy treated paper cone for a warm, rich tone. The truncated cast frame chassis allows for tight placement in your pro audio or car audio cabinet, and pair it with a Kappalite model for the ultimate in ultra-light bass guitar performance.
SPECIFICATION
- Nominal Basket Diameter: 5“, 127 mm
- Nominal Impedance*: 8 Ω
- Power Rating**
- Watts: 65 W
- Music Program: 130 W
- Resonance: 223 Hz
- Usable Frequency Range: 325 Hz - 20 kHz
- Sensitivity***: 93.1 dB
- Magnet Weight: 4 oz.
- Gap Height: 0.236“, 6 mm
- Voice Coil Diameter: 1“, 25 mm
THIELE & SMALL PARAMETERS
- Resonant Frequency (fs): 223 Hz
- DC Resistance (Re): 5.45 Ω
- Coil Inductance (Le): 0.18m H
- Mechanical Q (Qms): 2.8
- Electromagnetic Q (Qes): 0.93
- Total Q (Qts): 0.7
- Compliance Equivalent Volume (Vas): 0.85 liters / 0.03 cu.ft.
- Peak Diaphragm Displacement Volume (Vd): 3.6 cc
- Mechanical Compliance of Suspension (Cms): 0.12 mm/N
- BL Product (BL): 5.84 T-M
- Diaphragm Mass Inc. Airload (MMs): 4 grams
- Efficiency Bandwidth Product (EBP): 239
- Maximum Linear Excursion (Xmax): 0.51 mm
- Surface Area of Cone (Sd): 71.3 cm2
- Maximum Mechanical Limit (Xlim): 5.0 mm
MOUNTING INFORMATION
- Recommended Enclosure Volume
- Sealed: 0.85-1.56 liters / 0.03-0.06 cu.ft.
- Vented: - liters / - cu.ft.
- Driver Volume Displaced: 0.494 cu.ft. / 14 liters
- Overall Diameter: 5.25“, 133.4 mm
- Baffle Hole Diameter: 4.28“, 108.7 mm
- Front Sealing Gasket: Yes
- Rear Sealing Gasket: Yes
- Mounting Holes Diameter: 0.18“, 4.6mm
- Mounting Holes B.C.D.: 4.79“, 121.7mm
- Depth: 2.16“, 54.8 mm
- Net Weight: 2 lbs, 0.91 kg
- Shipping Weight: 2.2 lbs, 1 kgs
MATERIALS OF CONSTRUCTION
- Coil Construction: Pure aluminum voice coil
- Coil Former: Kapton former
- Magnet Composition: Neodymium magnet
- Core Details: Vented and Extended core
- Basket Materials: Die-cast aluminum basket
- Cone Composition: Treated paper cone
- Cone Edge Composition: Cloth cone edge
- Dust Cap Composition: Treated paper dust cap
|
6.5" Neodymium Coaxial Transducer - 90 dB sensitivity 1 W / 1 m
- 130 W + 25 W Power Handling
- 1.5" + 1" Voice Coil
- Single point source providing coherent wave front
- 90° conical dispersion
- Optimal for compact 2-way Systems
|
- 180 W continuous program power capacity
- 38 mm (1.5 in) copper voice coil
- 90 - 7000 Hz response
- 90 dB sensitivity
- Shorting copper cap for extended HF response
SPECIFICATIONS
Nominal Basket Diameter
|
5" / 127mm
|
Impedance
|
8 ohms
|
RMS Power Rating
|
90 Watts
|
Program Power
|
180 Watts
|
Frequency Response
|
90Hz - 7.0kHz
|
Sensitivity (1W/1m)
|
90dB
|
Voice Coil Diameter
|
1.5" / 38mm
|
Winding Material
|
Aluminum
|
Former Material
|
Kapton
|
Winding Depth
|
.37" / 9.5mm
|
Magnetic Gap Depth
|
.24" / 6mm
|
Flux Density
|
1.15T
|
MOUNTING INFORMATION
Overall Diameter
|
5.9" / 150mm
|
Bolt Circle Diameter
|
5.6" / 142mm
|
Baffle Cutout Diameter
|
4.8" / 122mm
|
Depth
|
2.95" / 75mm
|
Flange & Gasket Thickness
|
.35" / 9mm
|
No. Of Mounting Holes
|
4
|
Net Weight
|
1.9 lbs./ .85 kg.
|
THIELE-SMALL PARAMETER
Resonant Frequency (fs)
|
92Hz
|
Impedance (Re)
|
5.5 ohms
|
Electrical Factor(Qes)
|
.5
|
Mechanical Q (Qms)
|
11
|
Total Q (Qts)
|
.48
|
Compliance Equiv. Vol. (Vas)
|
3.3 Liters/.12cu. ft.
|
Voice Coil Overhang (Xmax)
|
3.3mm
|
Reference Efficiency
|
0.5%
|
BL Factor
|
8.5 T-M
|
Coil Inductance(Le)
|
0.35mH
|
Surface Area of Cone (Sd)m2
|
0.0095m2
|
|
- 90 dB sensitivity 1 W 11m
- 130 W + 25 W Power handling
- 1.5" + 1" voice coil
- Single point source providing coherent wave front
- 900 conical dispersion
- Optimal for compact 2-way systems
|
JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.
This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.
|
Reviews
There are no reviews yet.