| Content | Specifications
Product type
Loudspeaker Chassis
Nominal Diameter
304.8 mm
Overall diameter
305.5 mm
Pitch Circle Diameter
294.3 mm
Cut- out Measurement
278.1 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
225 W
Sensitivity (1 W / 1 m)
97.7 dB
Frequency response
48 - 8000 Hz
Voice Coil Material
copper
Depth of the magnetic gap
7.92 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
45 Hz
Re (DC resistance)
7.37 Ohm(s)
Qms (mechanical quality)
6.44
Le (inductance of the voice coil)
0.83 mH
Qes (electrical quality)
0.55
Qts (overall quality)
0.51
Vas (equivalent volume)
136.3
BL (power factor)
11.7 T/m
Xmax (maximum displacement)
3.2 mm
Cms (elasticity of the suspension)
0.34 mm/N
Sd (membrane area)
532.4 cm²
|
This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.
The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 15W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 100dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Round copper | | Magnet type | Alnico | | Frequency range | 75-5000Hz | | Resonance frequency, Fs | 75Hz | | DC resistance, Re | 6.4Ω & 11.8Ω | | Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 6.5“, 165mm | | Magnet structure diameter | 5.0“, 128mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 9.3lb, 4.2kg |
| |
Originally created as a higher-power handling variant of the G12M Greenback, the G12-65 is widely regarded as one of the best speakers ever produced for use in a 4x12 cabinet.
With its fast attack and tightly controlled low-end, the G12-65 became a firm favourite in the ʼ80s with hard rock players. The precisely tuned midrange and crisp defined top-end contribute to an aggressive crunch sound that punches through the mix while the mid-range warmth and detail give weight and depth to single notes.
| General specifications |
|---|
| Nominal diameter | 12“, 305mm | | Power Rating | 65W | | Nominal impedance | 8Ω and 15Ω | | Sensitivity | 97dB | | Chassis type | Pressed steel | | Voice coil diameter | 1.75“, 44.5mm | | Voice coil material | Rounded copper | | Magnet type | Ceramic | | Magnet weight | 35oz, 0.99kg | | Frequency range | 80-5000Hz | | Resonance frequency, Fs | 85Hz | | DC resistance, Re | 6.9Ω & 11.8Ω | | Mounting Information | | Diameter | 12.2“, 309mm | | Overall depth | 5.0“, 128mm | | Magnet structure diameter | 5.7“, 145mm | | Cut-out diameter | 11.1“, 283mm | | Mounting slot dimensions | 0.31“, 7.9mm Ø | | Number of mounting slots | 4 | | Mounting slot PCD | 11.7“, 297mm | | Unit weight | 12.1lb, 5.5kg |
| The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 - 1500 Hz response
96 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
General
|
| Product type |
Cone driver |
| Brand |
B&C Speakers |
| Reference |
12NW100 |
| Product code |
ALT12NW1008 |
Informations
|
| Nominal impedance |
8 ohm |
| Dimensional category |
12.5 inch |
| Frequency coverage type |
Sub, Low, Midbass |
| Manufacturer sensitivity |
96 dB |
| Calculated sensitivity |
93.76 dB |
| Nominal power handling |
1000 W |
| Bandwidth |
45÷1500 Hz |
Fundamental parameters
|
| Sd |
531 cm² |
| Mms |
119 gr |
| Le |
1.9 mH |
| Re |
5.1 ohm |
| BL |
28 T.m |
Small signal parameters
|
| Fs |
42 Hz |
| Qes |
0.21 |
| Qms |
3.6 |
| Qts |
0.2 |
| Vas |
44 L |
Datas
|
| Xmax |
±9 mm |
| Calculated Xmax |
±10.5 mm |
| EBP |
200 Hz |
| Zmin |
6.2 ohm |
| Fs / Qts |
210 Hz |
| Vas * Qts² |
1.76 L |
| Efficiency |
1.7 % |
| Calculated efficiency |
1.5 % |
| Weight |
~8.2 kg |
| Recommended load volume |
50 L |
| Fréquence d'accord liée à la charge |
50 Hz |
Dimensions
|
| Voice coil diameter |
4 inch |
| Winding depth |
25 mm |
| Gap height |
12 mm |
| Outside diameter |
319 mm |
| Baffle cutout diameter |
281 mm |
| Front thickness |
13 mm |
| Depth after front |
124 mm |
Shape & Materials
|
| Front chape |
Cylindrical |
| Magnet type |
Neodymium |
| Basket masterial |
Aluminium |
| Winding material |
Copper |
| Voice coil former |
Glass fiber |
| BETA- 12A Series Standard American
Recommended for professional audio and bass guitar applications as a woofer in a vented enclosure. Also
works well for PA in a sealed or bandpass enclosure.
SPECIFICATION
- Nominal Basket Diameter 12", 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 250 W / Music Program 500 W
- Resonance 47 Hz
- Usable Frequency Range 43 Hz - 3.8 kHz
- Sensitivity 98
- Magnet Weight 38 oz.
- Gap Height 0.312", 7.92 mm
- Voice Coil Diameter 2", 50.8 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.0
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 6.00
- Electromagnetic Q (Qes) 0.50
- Total Q (Qts) 0.46
- Compliance Equivalent Volume (Vas) 120.1 liters / 4.2 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 237 cc
- Mechanical Compliance of Suspension (Cms) 0.29 mm/N
- BL Product (BL) 10.8 T-M
- Diaphragm Mass inc. Airload (Mms) 40 grams
- Efficiency Bandwidth Product (EBP) 94
- Maximum Linear Excursion (Xmax) 4.4 mm
- Surface Area of Cone (Sd) 538.9 cm²
- Maximum Mechanical Limit (Xlim) 11 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 25.5-35.4 liters, 0.9-1.25 cu.ft.
Vented 36.8-139 liters/1.3-4.9 cu.ft.
- Overall Diameter 12.03", 305.5 mm
- Baffle Hole Diameter 10.95", 278.1 mm
- Front Sealing Gasket standard fitted as standard
- Rear Sealing Gasket standard fitted as standard
- Mounting Holes Diameter 0.25", 6.4 mm
- Mounting Holes B.C.D. 11.59", 294.3 mm
- Depth 4.57", 116 mm
MATERIALS of Construction
- Copper voice coil
- Polyimide former
- Ferrite magnet
- Vented and extended core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
Reviews
There are no reviews yet.