Content | General
Product type
Loudspeaker Chassis
Overall diameter
309.1 mm
Pitch Circle Diameter
298.5 mm
Cut- out Measurement
282.7 mm
Diameter of fixing holes
6.1 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
70 W
Sensitivity (1 W / 1 m)
100.7 dB
Frequency response
80 - 5000 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
70 Hz
Re (DC resistance)
6.47 Ohm(s)
Qms (mechanical quality)
11.46
Le (inductance of the voice coil)
0.49 mH
Qes (electrical quality)
0.45
Qts (overall quality)
0.43
Vas (equivalent volume)
71.19
BL (power factor)
13.18 T/m
Xmax (maximum displacement)
0.79 mm
Cms (elasticity of the suspension)
0.19 mm/N
Sd (membrane area)
519.5 cm²
|
Building on the platform of the Blue, the Gold is a higher-powered, Alnico-magnet speaker that recreates the unmistakable sonic signature of a ʽwell played-inʼ original. Over time, the high frequencies of a Blue soften and become less chalky as the cone becomes more flexible – a much sought after characteristic that the Gold exhibits straight out of the box. Also present in the Gold sound from the outset is an added warmth and complexity in the midrange which, coupled with the classic Alnico qualities of a laid-back attack, rounded low end and brilliant belllike highs, deliver huge rhythm voicings and saturated vocal lead tones.
The Gold is a wonderfully expressive and revealing loudspeaker, affording guitarists an unprecedented degree of dynamic control. It has already become a favourite for many working players worldwide whether picking and bending with Brad Paisley, or rocking hard with Danny Spitz of Anthrax.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 50W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
|
700 W continuous program power capacity |
| 80° nominal coverage |
| 45 – 18000 Hz response |
| 99 dB sensitivity |
| Single Neodymium magnet assembly |
|
2000 W continuous program power capacity |
|
100 mm (4 in) copper voice coil |
|
45 – 1000 Hz response |
|
95 dB sensitivity |
|
Aluminium demodulating ring allows a very low distortion figure |
|
Double silicone spider with optimized compliance |
|
Ventilated voice coil gap for reduced power compression |
| DELTA-12A Standard American
Recommended for professional audio as a mid-bass or woofer (with high-pass filter) in vented enclosures.
*Good replacement for Yamaha 12″ JAY51200 (1216301A), JAY51100, JAY5120, JAY5110 woofers.
Or Loudspeakers C112V, SM12V, BR12, BR12M, S112V, S112IV, SM121V, SV12, SV12M & more
SPECIFICATION
- Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 55 Hz
- Usable Frequency Range 54 Hz - 5 kHz
- Sensitivity 98.3
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 55 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.74 mH
- Mechanical Q (Qms) 5.27
- Electromagnetic Q (Qes) 0.46
- Total Q (Qts) 0.43
- Compliance Equivalent Volume 81.3 liters (Vas) 81.3 liters / 2.9 cu. ft.
- Peak Diaphragm Displacement Volume 125 cc
- Mechanical Compliance of Suspension 0.21 mm/N
- BL Product (BL) 13.5 T-M
- Diaphragm Mass inc. Airload (Mms) 39 grams
- Efficiency Bandwidth Product (EBP) 120
- Maximum Linear Excursion (Xmax) 2.4 mm
- Surface Area of Cone (Sd) 519.5 cm²
- Maximum Mechanical Limit (Xlim) 9.9 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 25.5-85 liters/0.9-3 cu.ft.
- Overall Diameter 12.03“, 305.5 mm
- Baffle Hole Diameter 10.95“, 278.1 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 11.59“, 294.3 mm
- Depth 5.35“, 136 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition felt dust cap
|
Reviews
There are no reviews yet.