Content |
LEGEND 10516
Higher power, vintage, seamed cone tonality for guitar. Ideal Vintage alnico Jensen replacement.
Coloration : A very meaty tone, but with sparkle, definition and a smooth top-end
Genre: Blues, Country, Rock
Specification
- Nominal Basket Diameter 10“, 254 mm
- Nominal Impedance 16 ohms
- Power Rating 75 W
- Resonance 96 Hz
- Usable Frequency Range 100 Hz - 5.8 kHz
- Sensitivity 100
- Magnet Weight 16 oz.
- Gap Height 0.25“, 6.35 mm
- Voice Coil Diameter 1.5“, 38.1 mm
Thiele & Small Parameters
Resonant Frequency (fs) 96 Hz- DC Resistance (Re) 10.20
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 13.80
- Electromagnetic Q (Qes) 1.32
- Total Q (Qts) 1.21
- Compliance Equivalent Volume (Vas) 21.8 liters / 0.8 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 0cc
- Mechanical Compliance of Suspension (Cms) 0.13 mm/N
- BL Product (BL) 9.9 T-M
- Diaphragm Mass inc. Airload (Mms) 21 grams
- Efficiency Bandwidth Product (EBP) 73
Maximum Linear Excursion (Xmax) 0.0 mm- Surface Area of Cone (Sd) 344.9 cm²
- Maximum Mechanical Limit (Xlim)
Mounting Information
- Recommended Enclosure Volume
Sealed Acceptable
Vented Acceptable - Overall Diameter 10.11“, 256.8 mm
- Baffle Hole Diameter 9.13“, 231.8 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.23“, 5.7 mm
- Mounting Holes B.C.D. 9.6“, 243.8 mm
- Depth 4.1“, 104 mm
Materials of Construction
- Coil Construktion Copper voice coil
- Coil Former Polyimide former
- Magnet Composition Ferrite magnet
- Core Details Non-vented core
- Basket Materials Pressed steel basket
- Cone Composition Paper Cone
- Cone Edge Composition Paper cone edge
- Dustcap Composition Solid composition felt dust cap
|
- 3'' sandwich voice coil fiberglass former and aluminium winding
- Progressive wave Konex spider
- Cloth surround with DAR technology
- Cone waterproof treatment
- Ventilated voice coil to reduce power compression
- BMF ferrite magnet
- 95.8 dB sensitivity
|
Recone kit for FP10PR300 |
400 W continuous program power capacity |
|
70° nominal coverage |
|
60 – 18000 Hz response |
|
94 dB sensitivity |
|
Single Neodymium magnet assembly |
|
XO-5 dedicated crossover network |
|
DYNACORD MFT2008 (330 983) 10'' Transducer gives excellent horizontal coverage and extremely low distortion.
|
Nominal Specifications
* Nominal Diameter 10“, 250 mm
* Overall Diameter 10.28“, 261 mm
* Bolt Circle Diameter 9.69“, 246 mm
* Baffle Cutout Diameter 9.13“, 232 mm
* Depth 4.54“, 115.3 mm
* Flange and Gasket Thickness 0.48“, 12.2 mm
Electrical Specifications
* Minimum Impedance 6.4 Ohm
* Nominal Impedance 8 Ohm
* Nominal Power Handling*** 300 W
* Maximum Power Handling**** 600 W
* Sensitivity (1W/1m) 98 dB
* Frequency Range 60 - 5000 Hz
* Voice Coil Diameter 2.5“, 65 mm
* Winding Material Aluminium
* Former Material Glass Fiber
* Winding Depth 0.49“, 12.5 mm
* Magnetic Gap Depth 0.31“, 8 mm
* Flux Density 1.25 T
THIELE & SMALL Parameters
* Resonant Frequency (fs) 60 Hz
* DC Resistance (Re) 5.4 Ohm
* BL Product (BL) 14.1 N/A
* Diaphragm Mass inc. Airload (Mms) 28.2 grams
* Mechanical Compliance of Suspension (Cms) 0.25 mm/N
* Rms 1.77 Kg/s
* Electromagnetic Q (Qes) 0.28
* Mechanical Q (Qms) 5.81
* Total Q (Qts) 0.26
* Compliance Equivalent Volume (Vas) 1.35 ft³, 38.4 dm³
* Surface Area of Cone (Sd) 49.6“², 320 cm²
* Maximum Linear Excursion (Xmax)* 4.92 mm
* Xdamage** 14 mm
* Coil Inductance (Le) 0.6 mH
* Diaphragm mass (Mmd) 24.9 g
* Eta Zero 2.62 %
Notes
* *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
* **Maximum excursion before permanent damage
* ***2 Hours Test According to AES 2-1984 Rev. 2003
* ****Maximum power is defined as 3dB greater than nominal power
|
Reviews
There are no reviews yet.