Content |
EMINENCE Professional Series
Recommended for vented, sealed, and horn loaded, professional audio enclosures as a subwoofer. Also great
as an automotive sub.
SPECIFICATION - Nominal Basket Diameter 12“, 304.8 mm
- Nominal Impedance 6 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 22 Hz
- Usable Frequency Range 25 Hz - 125 Hz
- Sensitivity 89.2
- Magnet Weight 160 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters - Resonant Frequency (fs) 22 Hz
- DC Resistance (Re) 4.29
- Coil Inductance (Le) 1.48 mH
- Mechanical Q (Qms) 13.32
- Electromagnetic Q (Qes) 0.39
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 125.2 liters / 4.4 cu. ft.
- Peak Diaphragm Displacement Volume 659 cc
- Mechanical Compliance of Suspension (Cms) 0.35 mm/N
- BL Product (BL) 15.0 T-M
- Diaphragm Mass inc. Airload (Mms) 146 grams
- Efficiency Bandwidth Product (EBP) 56
- Maximum Linear Excursion (Xmax) 13.0 mm
- Surface Area of Cone (Sd) 506.7 cm²
- Maximum Mechanical Limit (Xlim) 22 mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 22.7-28.3 liters / 0.8-1 cu.ft.
Vented 45.3-101.9 liters/1.6-3.6 cu.ft. - Overall Diameter 12.32“, 312.8 mm
- Baffle Hole Diameter 10.98“, 278.9 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.26“, 6.6 mm Mounting Holes B.C.D. 11.77“, 299 mm
- Depth 6.44“, 164 mm
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Double stacked 80 oz. ferrite
- Vented and extended core
- 12-spoke die-cast aluminum basket
- Kevlar-reinforced paper cone
- Foam cone edge
- Dual inverted dust caps
|
KAPPA PRO-12A Professional SeriesRecommended for professional audio in a vented mid-bass, and vented bass enclosure incorporating a high-pass filter.
Product type
Loudspeaker Chassis
Nominal Diameter
304.8 mm
Overall diameter
314.5 mm
Pitch Circle Diameter
293.8 mm
Cut- out Measurement
281.1 mm
Diameter of fixing holes
6.5 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
500 W
maximum rated load
1000 W
Sensitivity (1 W / 1 m)
97.1 dB
Frequency response
57 - 2800 Hz
Voice Coil Material
copper
Depth of the magnetic gap
9.53 mm
Fs (Resonance Frequency)
37 Hz
Re (DC resistance)
5.46 Ohm(s)
Qms (mechanical quality)
6.93
Le (inductance of the voice coil)
1.22 mH
Qes (electrical quality)
0.25
Qts (overall quality)
0.24
Vas (equivalent volume)
121
BL (power factor)
17.3 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.32 mm/N
Sd (membrane area)
519.5 cm²
|
700 W continuous program power capacity |
|
80° nominal coverage |
|
55 – 20000 Hz response |
|
99 dB sensitivity |
|
XO-3 dedicated crossover network |
|
This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.
The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.
General specifications | Nominal diameter | 12“, 305mm | Power Rating | 15W | Nominal impedance | 8Ω and 15Ω | Sensitivity | 100dB | Chassis type | Pressed steel | Voice coil diameter | 1.75“, 44.5mm | Voice coil material | Round copper | Magnet type | Alnico | Frequency range | 75-5000Hz | Resonance frequency, Fs | 75Hz | DC resistance, Re | 6.4Ω & 11.8Ω | Mounting Information | Diameter | 12.2“, 309mm | Overall depth | 6.5“, 165mm | Magnet structure diameter | 5.0“, 128mm | Cut-out diameter | 11.1“, 283mm | Mounting slot dimensions | 0.31“, 7.9mm Ø | Number of mounting slots | 4 | Mounting slot PCD | 11.7“, 297mm | Unit weight | 9.3lb, 4.2kg |
|
- Neodymium Coaxial Transducer
- 98 dB Sensitivity 1 W / 1 m
- 500 W + 80 W Power Handling
- 3" Copper Sandwich Voice Coil
- Triple Aluminum demodulating Rings
- Elliptical 80° x 60° Waveguide for precise directivity
- Single Point Source providing coherent Wave Front
- Very high SPL, superb Quaity Sound
- Optimal for compact 2-way Systems
|
Specification Nominal Diameter 320 (12) mm (in) Nominal Impedance (1) 8 Ohm Minimum Impedence 7.5 Ohm Nominal Power Handling (2) 450 W Continuous Power Handling (3) 900 W Sensitivity (1W/1m) (4) 95 dB Frequency Range 40 - 1000 Hz Voice Coil Diameter 76 (3) mm (in) Winding Material Copper Former Material Glass Fibre Winding Depth 22 (0.9) mm (in) Magnetic Gap Depth 10.5 (0.4) mm (in) Flux Density 1.15 T
Thiele & Small Parameters Fs 42 Hz Re 6.1 Ohm Qes 0.22 Qms 3.8 Qts 0.2 Vas 75 (2.6) dm3 (ft3) Sd 522 (80.9) cm2 (in2) Eta Zero 2.4 % Xmax +/- 7 mm Xvar +/- 9 mm Mms 74 g Bl 23.5 Txm Le 2 mH
Mounting and Shipping Info Overall Diameter 316 mm (12.4 in) Bolt Circle Diameter 296 mm (11.6 in) Baffle Cutout Diameter 282 mm (11.1 in) Depth 140 mm (5.5 in) Flange and Gasket Thickness 16 mm (5/8 in) Net Weight 7.6 kg (16.7 lb) Shipping Weight 8.4 kg (18.5 lb) Shipping Box 340x340x170 mm (13.4x13.4x6.7 in) 1For different impedances, please ask. 22 hours test made with continuous pink noise signal (6 dB crest factor). Power calculated on rated minimum impedance. 3Power on Continuous Program is defined as 3 dB greater than the Nominal rating. 4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. |
Reviews
There are no reviews yet.