Availability:
No longer available!SKU:EGLEM12NACategory:12 inches Woofer
12″ Speaker 200 W 8 Ohms
Following in the footsteps of the popular Legend EM12, the new EM12N takes the weight out but leaves the performance in. Rated at 200 watts, the neodymium EM12N delivers the same neutral tone so you can hear more of your guitar and amp, but with even tighter, more responsive and dynamic characteristics.
Following in the footsteps of the popular Legend EM12, the new EM12N takes the weight out but leaves the performance in. Rated at 200 watts, the neodymium EM12N delivers the same neutral tone so you can hear more of your guitar and amp, but with even tighter, more responsive and dynamic characteristics.
Following in the footsteps of the popular Legend EM12, the new EM12N takes the weight out but leaves the performance in. Rated at 200 watts, the neodymium EM12N delivers the same neutral tone so you can hear more of your guitar and amp, but with even tighter, more responsive and dynamic characteristics.
Content
General
Product type
Loudspeaker Chassis
Nominal Diameter
12 "
Nominal Diameter
305 mm
Voice Coil
2.5 "
Voice Coil
64 mm
Overall diameter
309.1 mm
Pitch Circle Diameter
298.5 mm
Cut- out Measurement
282.7 mm
Diameter of fixing holes
6.1 mm
Depth
127 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
99.9 dB
Frequency response
60 - 4200 Hz
Voice Coil Material
Aluminium
Magnet
Neodymium
Thiele & Small Parameter
Fs (Resonance Frequency)
51 Hz
Re (DC resistance)
7.38 Ohm(s)
Qms (mechanical quality)
7.74
Le (inductance of the voice coil)
0.49 mH
Qes (electrical quality)
0.35
Qts (overall quality)
0.34
Vas (equivalent volume)
102.3
Mms (moving mass)
38 g
BL (power factor)
16 T/m
Xmax (maximum displacement)
2.22 mm
Cms (elasticity of the suspension)
0.26 mm/N
Sd (membrane area)
532.4 cm²
Weight
3 kg
400 W continuous program power capacity
90° nominal coverage
50 – 20000 Hz response
98 dB sensitivity
XO-2 dedicated crossover network
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications
Nominal diameter (mm/in)
305/12
Power Rating (AES, W rms)
250
Nominal impedance (Ω)
8
Voice coil diameter (mm/in)
63.5/2.5
Magnet type
Ceramic
Magnet weight (kg/oz)
1.2/42
Chassis type
Pressed steel
Sensitivity (dB)
97
Frequency range (Hz)
40-4000
Coil material
Round copper
Former material
Polyimide
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Xmax (mm/in)
2.4/0.09
Gap depth (mm/in)
8.0/0.31
Voice coil winding width (mm/in)
12.7/0.50
Small Signal Parameters
D (m/in)
0.26/10.24
Fs (Hz)
63
Mmd (g/oz)
39.60/1.40
Mair
Qms
6.70
Qes
0.54
Qts
0.50
Re (Ω)
5.13
Vas (lt/ft3)
54.5/1.92
BI (Tm)
13.20
Cms (mm/N)
0.14
Rms (kg/s)
2.76
Le (mH)
Mounting Information
Overall diameter (mm/in)
309/12.17
Overall depth (mm/in)
130/5.12
Cut-out diameter (mm/in)
283/11.14
Mounting slot dimensions (mm/in)
Ø 7.9/0.31
Number of mounting slots
4
Mounting slot PCD range (mm/in)
297/11.69
Unit weight (kg/lb)
4.1/9.0
Packed Dimensions and Weight
Single pack size W x D x H (mm/in)
330 x 330 x 150/13.0 x 13.0 x 5.9
Single pack weight (kg/lb)
3/6.6
Multipack (60) size W x D x H (mm/in)
1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb)
190/419
12” neodymium woofer offers 300Wrms (AES) continuous power handling and 98dB sensitivity
3” high temperature Inside/Outside voice coil efficiently dissipates heat, preventing sensitivity loss through thermal compression
M-roll surround provides progressive excursion control, yielding a smooth response even at extremes of frequency range
Extremely lightweight design combined with a highly efficient magnet assembly results in exceptional power-to-weight ratio
Intelligent heat management in both chassis and magnet assembly design further minimizes distortion
Nominal diameter (mm/in)
305/12
Power Rating (AES, W rms)
300
Nominal impedance (Ω)
8
Voice coil diameter (mm/in)
76.2/3.0
Magnet type
Neodymium
Chassis type
Cast aluminium
Sensitivity (dB)
98
Frequency range (Hz)
50-4000
Coil material
Round copper
Cone material
Kevlar loaded paper
Surround material
Cloth-sealed
Suspension
Single
Xmax (mm/in)
4/0.16
Gap depth (mm/in)
8.0/0.32
Voice coil winding width (mm/in)
16.0/0.63
Small Signal Parameters
D (m/in)
0.26/10.24
Fs (Hz)
56.4
Mmd (g/oz)
54.41/1.92
Mair
6.92/0.244
Qms
2.74
Qes
0.33
Qts
0.29
Re (Ω)
5.77
Vas (lt/ft3)
51.78/1.828
BI (Tm)
19.61
Cms (mm/N)
0.13
Rms (kg/s)
7.921
Le (mH)
0.778
Mounting Information
Overall diameter (mm/in)
310/12.2
Overall depth (mm/in)
137/5.39
Cut-out diameter (mm/in)
286/11.26
Mounting slot dimensions (mm/in)
6.5/0.26 x 9.5/0.37
Number of mounting slots
8
Mounting slot PCD range (mm/in)
294/11.57
Unit weight (kg/lb)
2.6/5.7
Packed Dimensions and Weight
Single pack size W x D x H (mm/in)
-
Single pack weight (kg/lb)
-
Multipack (60) size W x D x H (mm/in)
1080 x 980 x 880/42.5 x 38.6 x 34.6
Multipack (60) weight (kg/lb)
146/321
This classic guitar speaker actually started life as a radio speaker that was modified specifically for use in electric guitar amplifiers. In its original incarnation as the G12 T530 it appeared in several colour variations, but it was the Blue version, fitted as standard into Vox AC30 amps, that secured its place in guitar tone history.
The Blue found favour with notable guitarists like Brian May, due to its glorious dampened attack, warm lows, mellow upper-mids and brilliant belllike top-end. When coupled with a suitable amplifier it evokes rich definition and develops beautiful musical compression when pushed. According to tone enthusiasts worldwide, the Blue is the benchmark for guitar speaker perfection.
General specifications
Nominal diameter
12“, 305mm
Power Rating
15W
Nominal impedance
8Ω and 15Ω
Sensitivity
100dB
Chassis type
Pressed steel
Voice coil diameter
1.75“, 44.5mm
Voice coil material
Round copper
Magnet type
Alnico
Frequency range
75-5000Hz
Resonance frequency, Fs
75Hz
DC resistance, Re
6.4Ω & 11.8Ω
Mounting Information
Diameter
12.2“, 309mm
Overall depth
6.5“, 165mm
Magnet structure diameter
5.0“, 128mm
Cut-out diameter
11.1“, 283mm
Mounting slot dimensions
0.31“, 7.9mm Ø
Number of mounting slots
4
Mounting slot PCD
11.7“, 297mm
Unit weight
9.3lb, 4.2kg
Neodymium Coaxial Transducer
98 dB Sensitivity 1 W / 1 m
500 W + 80 W Power Handling
3" Copper Sandwich Voice Coil
Triple Aluminum demodulating Rings
Elliptical 80° x 60° Waveguide for precise directivity
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Reviews
There are no reviews yet.