| Price | €454.77 €357.67 incl. GR VAT | €474.18 €369.00 incl. GR VAT | €1,029.85 €875.37 incl. GR VAT | €410.00 €369.00 incl. GR VAT | €729.94 €590.33 incl. GR VAT | €704.51 €598.84 incl. GR VAT |
| Content | General
Product type
Loudspeaker Chassis
Nominal Diameter
457.2 mm
Overall diameter
457.2 mm
Pitch Circle Diameter
438.2 mm
Cut- out Measurement
420.5 mm
Diameter of fixing holes
7.1 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
800 W
maximum rated load
1600 W
Sensitivity (1 W / 1 m)
96.4 dB
Frequency response
40 - 800 Hz
Voice Coil Material
copper
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
23 Hz
Re (DC resistance)
2.5 Ohm(s)
Qms (mechanical quality)
6.41
Le (inductance of the voice coil)
0.61 mH
Qes (electrical quality)
0.29
Qts (overall quality)
0.28
Vas (equivalent volume)
639
BL (power factor)
13.4 T/m
Xmax (maximum displacement)
4.8 mm
Cms (elasticity of the suspension)
0.34 mm/N
Sd (membrane area)
1159 cm²
|
- 4'' sandwich voice coil fiberglass former
- Double progressive wave Konex spider
- Cloth suround with DAR technology
- Autoclave waterproof cone treatment
- Balanced neodymium magnet circuit
- Cooling radiator and ventilated voice
- coil to reduce power compression
- 98.1 dB sensitivity
Manual/Εγχειρίδιο
|
- 95 dB Sensitivity 1 W / 1 m
- 1.200 W Power Handling
- 4" Copper Sandwich Voice Coil for low Power Compression
- Neodymium Magnet System
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for high Output Subwoofers
- Leight Weight Carbon Fiber Diaphragm
| |
Nominal Specifications
Nominal Diameter 18“, 460 mm
Overall Diameter 18.11“, 460 mm
Bolt Circle Diameter 17.32“, 440 mm
Baffle Cutout Diameter 16.61“, 422 mm
Depth 7.65“, 194.3 mm
Flange and Gasket Thickness 0.55“, 13.9 mm
Electrical Specifications
Minimum Impedance 6.3 Ohm
Nominal Impedance 8 Ohm
Nominal Power Handling*** 1200 W
Maximum Power Handling**** 2400 W
Sensitivity (1W/1m) 98 dB
Frequency Range 35 - 1600 Hz
Voice Coil Diameter 4“, 100 mm
Winding Material Kupfer
Former Material Glass Fiber
Winding Depth 1.14“, 28.9 mm
Magnetic Gap Depth 0.47“, 12 mm
Flux Density 1.22 T
THIELE & SMALL Parameters
Resonant Frequency (fs) 35 Hz
DC Resistance (Re) 5 Ohm
BL Product (BL) 24.8 N/A
Diaphragm Mass inc. Airload (Mms) 211.8 grams
Mechanical Compliance of Suspension (Cms) 0.098 mm/N
Rms 4.19 Kg/s
Electromagnetic Q (Qes) 0.38
Mechanical Q (Qms) 11.1
Total Q (Qts) 0.37
Compliance Equivalent Volume (Vas) 6.74 ft³, 190.8 dm³
Surface Area of Cone (Sd) 181.97“², 1174 cm²
Maximum Linear Excursion (Xmax)* 12.45 mm
Xdamage** 21 mm
Coil Inductance (Le) 1.26 mH
Diaphragm mass (Mmd) 189.1 g
Eta Zero 2.1 %
Notes
*Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
**Maximum excursion before permanent damage
***2 Hours Test According to AES 2-1984 Rev. 2003
****Maximum power is defined as 3dB greater than nominal power
|
- 95 dB Sensitivity 1 W / 1 m
- 1.200 W Power Handling
- 4" Copper Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for high output Subwoofers
|
Reviews
There are no reviews yet.