| Content | Eminence RETRO SE50-16 Guitar Speaker,16 Ohm, Classic Voicing, 50 Watts, 24oz Ferrite Magnet
Guitar Speaker,16 Ohm, Classic Voicing, 50 Watts, 24oz Ferrite Magnet
General
Product type
Loudspeaker Chassis
Overall diameter
311.2 mm
Pitch Circle Diameter
297.7 mm
Cut- out Measurement
279.4 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
16 Ohm(s)
Nominal Load Capacity
50 W
Sensitivity (1 W / 1 m)
97,5 dB
Frequency response
80 - 4500 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
93.6 Hz
Re (DC resistance)
13.58 Ohm(s)
Qms (mechanical quality)
19.53
Le (inductance of the voice coil)
0.43 mH
Qes (electrical quality)
0.89
Qts (overall quality)
0.85
Vas (equivalent volume)
42.5
BL (power factor)
10.79 T/m
Cms (elasticity of the suspension)
0.106 mm/N
Sd (membrane area)
532.4 cm²
|
For use in 2-way or compact 3-way systems, the 1225 bass and mid range driver has a high sensitivity and excellent power handling characteristics.
General specifications | Nominal diameter (mm/in) | 305/12 | | Power Rating (AES, W rms) | 250 | | Nominal impedance (Ω) | 8 | | Voice coil diameter (mm/in) | 63.5/2.5 | | Magnet type | Ceramic | | Magnet weight (kg/oz) | 1.2/42 | | Chassis type | Pressed steel | | Sensitivity (dB) | 97 | | Frequency range (Hz) | 40-4000 | | Coil material | Round copper | | Former material | Polyimide | | Cone material | Kevlar loaded paper | | Surround material | Cloth-sealed | | Suspension | Single | | Xmax (mm/in) | 2.4/0.09 | | Gap depth (mm/in) | 8.0/0.31 | | Voice coil winding width (mm/in) | 12.7/0.50 | Small Signal Parameters | D (m/in) | 0.26/10.24 | | Fs (Hz) | 63 | | Mmd (g/oz) | 39.60/1.40 | | Mair | | | Qms | 6.70 | | Qes | 0.54 | | Qts | 0.50 | | Re (Ω) | 5.13 | | Vas (lt/ft3) | 54.5/1.92 | | BI (Tm) | 13.20 | | Cms (mm/N) | 0.14 | | Rms (kg/s) | 2.76 | | Le (mH) | | Mounting Information | Overall diameter (mm/in) | 309/12.17 | | Overall depth (mm/in) | 130/5.12 | | Cut-out diameter (mm/in) | 283/11.14 | | Mounting slot dimensions (mm/in) | Ø 7.9/0.31 | | Number of mounting slots | 4 | | Mounting slot PCD range (mm/in) | 297/11.69 | | Unit weight (kg/lb) | 4.1/9.0 | Packed Dimensions and Weight | Single pack size W x D x H (mm/in) | 330 x 330 x 150/13.0 x 13.0 x 5.9 | | Single pack weight (kg/lb) | 3/6.6 | | Multipack (60) size W x D x H (mm/in) | 1080 x 980 x 880/42.5 x 38.6 x 34.6 | | Multipack (60) weight (kg/lb) | 190/419 |
|
Long excursion 12" woofer with 800W power handling for
subwoofer application. A special 3" copper voice coil using
proprietary high temperature adhesives and an optimized
magnet assembly guarantees superb LF dynamic range with a
very low distortion. Due to the linear characteristics of the 12
PZ 32, exceptional results are obtained in horn loaded
subwoofer applications.
Specifications
Nominal Diameter 320 mm (12 in)
Nominal Impedance 8 Ω
Minumum Impedance 7.8 Ω
Power Handling
(70 –700 Hz)
Nominal1 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 95 dB
Frequency Range 40-2500 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 22 mm (7/8 in)
Magnetic Gap Depth 10 mm (3/8 in)
Flux Density 1.1 T
Also available in 4 Ω, data upon request
Thiele & Small Parameters4
Fs 38 Hz
Re 6.2 Ω
Qes 0.2
Qms 5.9
Qts 0.19
Vas 102 dm3 (3.6 ft3)
Sd 522 cm2 (80.9 in2)
η0 2.7%
X max ± 5.5 mm
X var ± 5.5 mm
Mms 64 g
Bl 21.7 T·m
Le 2.7 mH
Mounting and Shipping Information
Overall Diameter 316 mm (12.4 in)
Bolt Circle Diameter 296 mm (11.6 in)
Baffle Cutout Diameter 282 mm (11.1 in)
Depth 134 mm (5.3 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 7.6 kg (16.7 lb)
Shipping Weight 8.5 kg (18.7 lb)
Shipping Box 380x380x170 mm
(15x15x6.7 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2500 Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test.
|
| 400 W continuous program power capacity |
| | 70° nominal coverage |
| | 60 – 18000 Hz response |
| | 96 dB sensitivity |
| | Single Neodymium magnet assembly |
| | XO-6 dedicated crossover network |
|
| 2000 W continuous program power capacity |
|
| 100 mm (4 in) copper voice coil |
|
| 45 – 1000 Hz response |
|
| 95 dB sensitivity |
|
| Aluminium demodulating ring allows a very low distortion figure |
|
| Double silicone spider with optimized compliance |
|
| Ventilated voice coil gap for reduced power compression |
| The B&C 12NW100 speaker is designed to produce bass, it is typically a 12 inch usable as a bass power speaker in a subwoofer for a compact system often transported. The 12NW100 will delight you with bass-reflex or band-pass load, its significant admissible electrical power makes it a real machine for producing bass, however, special care must be taken with the amplification dedicated to it.
2000 W continuous program power capacity
100 mm (4 in) copper voice coil
45 - 1500 Hz response
96 dB sensitivity
FEA optimized Neodymium magnet assembly
Double silicone spider with optimized compliance
Ventilated voice coil gap for reduced power compression
General
|
| Product type |
Cone driver |
| Brand |
B&C Speakers |
| Reference |
12NW100 |
| Product code |
ALT12NW1008 |
Informations
|
| Nominal impedance |
8 ohm |
| Dimensional category |
12.5 inch |
| Frequency coverage type |
Sub, Low, Midbass |
| Manufacturer sensitivity |
96 dB |
| Calculated sensitivity |
93.76 dB |
| Nominal power handling |
1000 W |
| Bandwidth |
45÷1500 Hz |
Fundamental parameters
|
| Sd |
531 cm² |
| Mms |
119 gr |
| Le |
1.9 mH |
| Re |
5.1 ohm |
| BL |
28 T.m |
Small signal parameters
|
| Fs |
42 Hz |
| Qes |
0.21 |
| Qms |
3.6 |
| Qts |
0.2 |
| Vas |
44 L |
Datas
|
| Xmax |
±9 mm |
| Calculated Xmax |
±10.5 mm |
| EBP |
200 Hz |
| Zmin |
6.2 ohm |
| Fs / Qts |
210 Hz |
| Vas * Qts² |
1.76 L |
| Efficiency |
1.7 % |
| Calculated efficiency |
1.5 % |
| Weight |
~8.2 kg |
| Recommended load volume |
50 L |
| Fréquence d'accord liée à la charge |
50 Hz |
Dimensions
|
| Voice coil diameter |
4 inch |
| Winding depth |
25 mm |
| Gap height |
12 mm |
| Outside diameter |
319 mm |
| Baffle cutout diameter |
281 mm |
| Front thickness |
13 mm |
| Depth after front |
124 mm |
Shape & Materials
|
| Front chape |
Cylindrical |
| Magnet type |
Neodymium |
| Basket masterial |
Aluminium |
| Winding material |
Copper |
| Voice coil former |
Glass fiber |
|
Reviews
There are no reviews yet.