| Content | Eminence RETROBASS-S2010 10" Bass Guitar Driver, Ferrite Magnet, 8 Ohms, 2” Copper Voice Coil, Stamped Frame, 200 W
10" Bass guitar driver for sealed or vented cabinets. Classic American bass guitar tone.
General
Product type
Loudspeaker Chassis
Overall diameter
256.8 mm
Pitch Circle Diameter
246.1 mm
Cut- out Measurement
231.9 mm
Diameter of fixing holes
5.8 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
93.2 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
50 Hz
Re (DC resistance)
5.9 Ohm(s)
Qms (mechanical quality)
5.53
Le (inductance of the voice coil)
0.92 mH
Qes (electrical quality)
0.55
Qts (overall quality)
0.5
Vas (equivalent volume)
60.75
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.35 mm/N
Sd (membrane area)
355.4 cm²
| 2.5" voice coil Fiberglass former and Aluminium Winding
PS Spider with Progressive Waves
DAR Cloth surround with Double Asymmetric Rolls Technology (DAR)
WpT Waterproof Cone Treatment
BMF Balanced Ferrite Magnet Circuit with Aluminium Demodulating Ring
VMVc Ventilated Magnet and Voice Coil to reduce Power Compression
96.3 dB sensitivity
Frequency Range 55-3500 Hz
Shape Cylindrical
Product type Cone driver
Brand Sica
Frequency coverage type Low, Midbass, Midrange
Dimensional category 10.5 inch
Front chape Cylindrical
External diametre 268 mm
Mounting diametre 229.8 mm
Magnet type Ferrite
Basket masterial Aluminium
Nominal impedance 8 ohm
Nominal power handling 300 W
Max power handling 600 W
Manufacturer sensitivity 96.3 dB
Calculated sensitivity 94 dB
Frequency response 55-3500 Hz
Voice coil diameter 2.5 inch
Winding material Aluminium
Voice coil former Glass fiber
Winding depth 12 mm
Gap height 8 mm
Flux density 1.17 T
Depth 119.5 mm
Depth after front 107 mm
Front thickness 12.5 mm
Diamètre aimant (mm) 145 mm
Weight 5.6 kg
Fs 57 Hz
Re 5.5 ohm
Qes 0.4
Qms 4.23
Qts 0.37
Vas 39.7 L
Sd 346.4 cm²
Cms 233 µm/N
Efficiency 1.76 %
Calculated efficiency 1.77 %
Xmax 4 mm
Xvar 7 mm
Mms 33.5 gr
BL 12.8 T.m
Le 0.46 mH
EBP 143
Dome material Paper
Cone material Paper
Surround material Cloth
Surround shape Double roll
Shipping weight 5.6 kg |
Eminence Basslite CA2010 10" 150W 8 Ohm
Recommended for bass guitar. Excellent in either sealed or vented enclosures. Nice, tight, top end.
SPECIFICATION - Nominal Basket Diameter 10“, 254mm
- Nominal Impedance* 8 ohms
- Power Rating** Watts 150W Music Program 300W
- Resonance 51Hz
- Usable Frequency Range*** 48Hz-7kHz
- Sensitivity 93.5
- Magnet Weight 4 oz.
- Gap Height 0.28“, 7.2mm
- Voice Coil Diameter 2“, 50.8mm
THIELE & Small Parameters - Resonant Frequency (fs) 51Hz
- DC Resistance (Re) 5.46
- Coil Inductance (Le) 0.55mH
- Mechanical Q (Qms) 17.5
- Electromagnetic Q (Qes) 0.52
- Total Q (Qts) 0.51
- Compliance Equivalent Volume (Vas) 49 liters / 1.7 cu. ft.
- Peak Diaphragm Displacement Volume (Vd) 126cc
- Mechanical Compliance of Suspension (Cms) 0.27mm/N
- BL Product (BL) 11.2 T-M
- Diaphragm Mass inc. Airload (Mms) 37 grams
- Efficiency Bandwidth Product (EBP) 98
- Maximum Linear Excursion (Xmax) 3.5mm
- Surface Area of Cone (Sd) 360.7 cm2
- Maximum Mechanical Limit (Xlim) 7.0mm
MOUNTING Information - Recommended Enclosure Volume
Sealed 17-23 liters/ 0.6-0.8 cu.ft.
Vented 23-54 liters/ 0.8-1.9 cu.ft. - Overall Diameter 10.25“, 260.4mm
- Baffle Hole Diameter 9.13“, 231.9mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.0mm
- Mounting Holes B.C.D. 9.73“, 247.1mm
- Depth 4.75“, 121mm
- Net Weight 3.6 lbs.,1.6 kg
- Shipping Weight 4.7 lbs., 2.1 kg
MATERIALS of Construction - Copper voice coil
- Polyimide former
- Neodymium magnet
- Non-vented core
- Die-cast aluminum basket
- Aluminum Alloy Cone
- Cloth cone edge
- Solid composition felt dust cap
|
| 600 W continuous program power capacity |
|
| 64 mm (2.5 in) copper voice coil |
|
| 50 – 2500 Hz response |
|
| 96 dB sensitivity |
|
| Neodymium magnet allows a very light yet powerful motor assembly |
|
| Shorting copper cap for extended HF response |
|
| Ventilated voice coil gap for reduced power compression |
|
- 3'' sandwich voice coil fiberglass former and aluminium winding
- Progressive wave Konex spider
- Cloth surround with DAR technology
- Cone waterproof treatment
- Ventilated voice coil to reduce power compression
- BMF ferrite magnet
- 95.8 dB sensitivity
|
Recone kit for FP10PR300 |
Reviews
There are no reviews yet.