Content | Specifications
Product type
Loudspeaker Chassis
Overall diameter
388.1 mm
Pitch Circle Diameter
357.1 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
400 W
Sensitivity (1 W / 1 m)
102 dB
Frequency response
60 - 3600 Hz
Voice Coil Material
copper
Depth of the magnetic gap
9.53 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
58 Hz
Re (DC resistance)
7.45 Ohm(s)
Qms (mechanical quality)
6.37
Le (inductance of the voice coil)
0.46 mH
Qes (electrical quality)
0.55
Qts (overall quality)
0.5
Vas (equivalent volume)
120.85
BL (power factor)
18.33 T/m
Xmax (maximum displacement)
0.79 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
889.6 cm²
| |
Neodymium coaxial speaker with 15" woofer, 8Ω, 400W Nominal, 800W continuous, 99dB (1W/1m) and horn 80W Nominal, 160W continuous, 105dB (1W/1m), response frequency 40-18000Hz, dispersion 80 degrees, 5,6Kg.
800 W continuous program power capacity |
|
80° nominal coverage |
|
40 – 18000 Hz response |
|
99 dB sensitivity |
|
Single Neodymium magnet assembly
Nominal Diameter |
380 mm (15 in) |
Nominal Impedance |
8 ohm |
Minimum Impedance |
6.0 ohm (LF) 8.0 ohm (HF) |
Frequency Range |
40 - 18000 Hz |
Dispersion Angle |
80° |
LF Unit |
|
Sensitivity (1W/1m) |
99 dB |
Nominal Power Handling |
400 W |
Continuous Power Handling |
800 W |
Voice Coil Diameter |
76 mm (3 in) |
Winding Material |
Copper |
HF Unit |
|
Sensitivity (1W/1m) |
105 dB |
Nominal Power Handling |
80 W |
Continuous Power Handling |
160 W |
Voice Coil Diameter |
75 mm (3 in) |
Winding Material |
Aluminium |
Diaphragm Material |
Polyester/Titanium |
Recom. Crossover |
1.2 kHz |
Overall Diameter |
393 mm (15.5 in) |
Bolt Circle Diameter |
374 mm (14.7 in) |
Baffle Cutout Diameter |
353 mm (13.9 in) |
Depth |
198 mm (7.8 in) |
Flange and Gasket Thickness |
16 mm (5/8 in) |
Net Weight |
5.6 kg (12.3 lb) |
Shipping Weight |
7.0 kg (15.4 lb) |
Shipping Box |
450x450x290 mm (17.7x17.7x11.4 in) |
|
|
The 2226J 15" low frequency transducer represents the results of JBL's latest engineering research in high power transducer design. For increased power handling while reducing power compression, a unique direct voice coil-to-air heat dissipation method called Vented Gap Cooling has been used. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature. Through the use of new computer-aided magnet optimization and analysis techniques comes a new weight-optimized Symmetrical Field Geometry (SFG) magnet structure, resulting in a reduction of overall driver weight and a significant reduction in harmonic distortion. This new magnet structure offers much of the weight advantage of rare earth magnet structures without their prohibitive cost. Specifications: *Power handling: 600 watts RMS *Voice coil diameter: 4" *Nominal impedance: 16 ohms *Frequency Range: 30-2,500 Hz *Magnet assembly weight: 15 lbs. *Fs: 40 Hz *SPL: 97 dB 1W/1m *Vas: 6.2 cu. ft. *Qms: 5.0 *Qes: 0.33 *Qts: 0.31 *Xmax: 7.6 mm *Dimensions: Overall Diameter: 15-1/4“, Cutout Diameter: 14“, Mounting Depth: 5-1/2“. |
15" Speaker 300 W 8 Ohms
Recommended for professional audio as a woofer in sealed and vented enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
1.5 "
Voice Coil
38.1 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Section Diameter
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
148 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
maximum rated load
400 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6.35 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
35 Hz
Re (DC resistance)
6.32 Ohm(s)
Qms (mechanical quality)
8.1
Le (inductance of the voice coil)
1.1 mH
Qes (electrical quality)
0.63
Qts (overall quality)
0.58
Vas (equivalent volume)
334.6
Mms (moving mass)
60 g
BL (power factor)
11.5 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.35 mm/N
Sd (membrane area)
823.7 cm²
Weight
4,9 kg
| Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a ventedsatellite enclosure.
Product type
Loudspeaker Chassis
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Cut- out Measurement
352.3 mm
Diameter of fixing holes
6.4 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Depth of the magnetic gap
6.35 mm
Fs (Resonance Frequency)
41 Hz
Re (DC resistance)
5.88 Ohm(s)
Qms (mechanical quality)
7.23
Le (inductance of the voice coil)
0.84 mH
Qes (electrical quality)
1.53
Qts (overall quality)
1.26
Vas (equivalent volume)
260
BL (power factor)
7.7 T/m
Xmax (maximum displacement)
3.8 mm
Cms (elasticity of the suspension)
0.25 mm/N
Sd (membrane area)
856.3 cm²
|
Reviews
There are no reviews yet.