Content | Specifications
Product type
Loudspeaker Chassis
Overall diameter
398.1 mm
Pitch Circle Diameter
7.1 mm
Cut- out Measurement
369.8 mm
Diameter of fixing holes
7.1 mm
Nominal Impedance
4 Ohm(s)
Nominal Load Capacity
300 W
Sensitivity (1 W / 1 m)
101 dB
Frequency response
50 - 33000 Hz
Voice Coil Material
copper
Thiele & Small Parameter
Fs (Resonance Frequency)
56 Hz
Re (DC resistance)
3.18 Ohm(s)
Qms (mechanical quality)
9.71
Le (inductance of the voice coil)
0.4 mH
Qes (electrical quality)
0.34
Qts (overall quality)
0.33
Vas (equivalent volume)
111.97 liters / 3.95 cu.ft.
BL (power factor)
15.76 T/m
Xmax (maximum displacement)
1.4 mm
Cms (elasticity of the suspension)
0.11 mm/N
Sd (membrane area)
856.3 cm²
| DELTA-15A Series Standard American
Recommended for professional audio as a mid-bass or vocal wedge in a sealed enclosure. Also suitable as a
mid-bass or woofer in vented enclosures.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 16 ohms
- Power Rating Watts 400 W / Music Program 800 W
- Resonance 40 Hz
- Usable Frequency Range 48 Hz - 4 kHz
- Sensitivity 100
- Magnet Weight 56 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 2.5“, 63.5 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 40 Hz
- DC Resistance (Re) 6.3
- Coil Inductance (Le) 0.64 mH
- Mechanical Q (Qms) 8.05
- Electromagnetic Q (Qes) 0.57
- Total Q (Qts) 0.53
- Compliance Equivalent Volume (Vas) 270.7 liters / 9.56 cu.ft
- Peak Diaphragm Displacement Volume (Vd) 233 cc
- Mechanical Compliance of Suspension (Cms) 0.26 mm/N
- BL Product (BL) 13.2 T-M
- Diaphragm Mass inc. Airload (Mms) 62 grams
- Efficiency Bandwidth Product (EBP) 70
- Maximum Linear Excursion (Xmax) 2.7 mm
- Surface Area of Cone (Sd) 864.6 cm²
- Maximum Mechanical Limit (Xlim) 11.1 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed 37-42.5 liters/1.3-1.5 cu.ft.
Vented 82-161.4 liters/2.9-5.7cu.ft.
- Overall Diameter 15.15“, 384.8 mm
- Baffle Hole Diameter 13.77“, 349.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.25“, 6.4 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.05“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Pressed steel basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
15" Speaker 300 W 8 Ohms
Recommended for professional audio as a woofer in sealed and vented enclosures.
Product type
Loudspeaker Chassis
Type
PA
Nominal Diameter
15 "
Nominal Diameter
381 mm
Voice Coil
1.5 "
Voice Coil
38.1 mm
Overall diameter
384.8 mm
Pitch Circle Diameter
369.9 mm
Section Diameter
352.3 mm
Diameter of fixing holes
6.4 mm
Depth
148 mm
Nominal Impedance
8 Ohm(s)
Nominal Load Capacity
200 W
maximum rated load
400 W
Sensitivity (1 W / 1 m)
97 dB
Frequency response
46 - 3500 Hz
Voice Coil Material
copper
Magnet
Ferrite
Depth of the magnetic gap
6.35 mm
Thiele & Small Parameter
Fs (Resonance Frequency)
35 Hz
Re (DC resistance)
6.32 Ohm(s)
Qms (mechanical quality)
8.1
Le (inductance of the voice coil)
1.1 mH
Qes (electrical quality)
0.63
Qts (overall quality)
0.58
Vas (equivalent volume)
334.6
Mms (moving mass)
60 g
BL (power factor)
11.5 T/m
Xmax (maximum displacement)
4 mm
Cms (elasticity of the suspension)
0.35 mm/N
Sd (membrane area)
823.7 cm²
Weight
4,9 kg
| High efficiency 15" woofer with a very flat frequency
response up to 2 kHz and high power handling (800W). Good
LF performance, smooth voice response, and compatibility
with compact bass-reflex enclosures, the 15 PK 40 achieves
perfect balance in two-way systems.
Specifications
Nominal Diameter 380 mm (15 in)
Nominal Impedance 8 Ω
Minumum Impedance 6.2 Ω
Power Handling
(50 –500 Hz)
Nominall 400 W
Continuous Program2 800 W
Sensitivity (1W/1m)3 99 dB
Frequency Range 50-2000 Hz
Voice Coil Diameter 76 mm (3 in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 16 mm (5/8 in)
Magnetic Gap Depth 9 mm (11/32 in)
Flux Density 1.1 T
Thiele & Small Parameters4
Fs 47 Hz
Re 5.1 Ω
Qes 0.33
Qms 5.1
Qts 0.31
Vas 140 dm3 (4.9 ft3)
Sd 855 cm2 (132.5 in2)
η0 4.2%
X max ± 4 mm
X var ± 6 mm
Mms 84 g
Bl 19.7 T·m
Le 2.3 mH
Mounting and Shipping Information
Overall Diameter 394 mm (15.5 in)
Bolt Circle Diameter 374 mm (14.6 in)
Baffle Cutout Diameter 355 mm (13.9 in)
Depth 162 mm (6.4 in)
Flange and Gasket Thickness 16 mm (5/8 in)
Net Weight 8.3 kg (18.3 lb)
Shipping Weight 9.6 kg (21.1 lb)
Shipping Box 450x450x200 mm
(17.7x17.7x8 in)
1 2 hours test made with continuous pink noise signal (6 dB crest factor) within the
specified range. Power calculated on rated minimum impedance. Loudspeaker in
free air.
2 Power on Continuous Program is defined as 3 dB greater than the Nominal rating.
3 Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance. Average
SPL from 200 to 2000Hz.
4 Thiele-Small parameters are measured after a high level 20 Hz sine wave preconditioning
test. |
KAPPA PRO-15A Professional Series
Recommended for professional audio in a vented mid-bass or bass enclosure. Also suitable for bass guitar.
SPECIFICATION
- Nominal Basket Diameter 15“, 381 mm
- Nominal Impedance 8 ohms
- Power Rating Watts 500 W / Music Program 1000 W
- Resonance 47 Hz
- Usable Frequency Range 46 Hz - 4 kHz
- Sensitivity 101
- Magnet Weight 80 oz.
- Gap Height 0.375“, 9.53 mm
- Voice Coil Diameter 3“, 76.2 mm
THIELE & Small Parameters
- Resonant Frequency (fs) 47 Hz
- DC Resistance (Re) 5.23
- Coil Inductance (Le) 1.01 mH
- Mechanical Q (Qms) 8.01
- Electromagnetic Q (Qes) 0.40
- Total Q (Qts) 0.38
- Compliance Equivalent Volume (Vas) 167.7 liters / 5.9 cu. ft.
- Peak Diaphragm Displacement Volume 274 cc
- Mechanical Compliance of Suspension (Cms) 0.16 mm/N
- BL Product (BL) 16.6 T-M
- Diaphragm Mass inc. Airload (Mms) 72 grams
- Efficiency Bandwidth Product (EBP) 118
- Maximum Linear Excursion (Xmax) 3.2 mm
- Surface Area of Cone (Sd) 856.3 cm²
- Maximum Mechanical Limit (Xlim) 13.2 mm
MOUNTING Information
- Recommended Enclosure Volume
Sealed N/A
Vented 54-184 liters/1.9-6.5 cu.ft.
- Overall Diameter 15.32“, 389.1 mm
- Baffle Hole Diameter 14.0“, 355.6 mm
- Front Sealing Gasket fitted as standard
- Rear Sealing Gasket fitted as standard
- Mounting Holes Diameter 0.28“, 7.1 mm
- Mounting Holes B.C.D. 14.56“, 369.9 mm
- Depth 6.06“, 154 mm
MATERIALS of Construction
- Aluminum voice coil
- Polyimide former
- Ferrite magnet
- Vented core
- Die-cast aluminum basket
- Paper Cone
- Cloth cone edge
- Solid composition paper dust cap
|
The high power handling and robust construction of the 2226H make it a natural for tour sound and fixed sound reinforcement use, while the low distortion and smooth response make it an ideal choice for critical high level monitoring applications.
To increase power handling while reducing power compression, JBL engineers created a unique, direct voice coil-to-air heat dissipation method called Vented Gap Cooling. This process pumps air through the magnetic gap and directly over and around the voice coil to provide immediate heat transfer and reduction in operating temperature—a direct improvement in power compression.
The 2226H incorporates a SFG (Symmetrical Field Geometry) magnetic structure. Computer-aided magnet optimization and analysis allowed JBL engineers to optimize magnet weight, flux density and reduced distortion. This patented magnet structure offers much of the weight advantage of rare earth magnet structures without their higher cost.
JBL 2226H 15" Low Frequency Transducer Specifications:
- Nominal Diameter : 15" (380 mm)
- Rated Impedance : 8ohms
- Power Capacity : 600W AES continuous pink noise
- Sensitivity : 97dB SPL, 1W, 1m (3.3 ft)
- Frequency Range : 30Hz-2.5kHz
- Power Compression - at —10 dB power (60 W) : 0.7dB
- Power Compression - at —3 dB power (300 W) : 2.5dB
- Power Compression - at rated power (600 W) : 4.0dB
- Distortion - 2nd harmonic :
|
Reviews
There are no reviews yet.