Content |
The basic concept of the THUNDER series was just to strip the handling to the bone but deliver convincing sounds.There you go, these handy little workhorses will do any gig.Preamp:3 channels (3 ECC 83 preamp tubes), Clean, Crunch, Lead, single 3 band EQ, Crunch/Lead, Clean/Lead switches. Master section:Master volume, 50 watts (1 x EC83, 2 x 5881 power amp tubes. Outputs: Speaker outs (2 x 8, 2 x 16 Ohms), fx loop (parallel to serial adjustable), dual footswitch jacks (Z-3/Z -4). |
Marshall 2245-01 30W Guitar Amplifier
When Jim Marshall first started manufacturing Marshall amps, back in 1962, the first amp out of the workshop was the JTM45. This amp instantly became a hit and launched a whole new generation of amazing guitar players. Since then, connoisseurs of tone have searched high and low for original examples of this beautiful amp. Now they need search no more, Marshall has re-issued the JTM45 complete with its full quota of glassy clean tone and fluid warm sustain.
By including GZ34 valve rectification, as found in the original, Marshall has ensured a faithful recreation of the JTM45s glorious sound. The GZ34 rectifier valve interacts with the rest of the valves causing subtle harmonics to shift and smoulder beneath every note you play.
Model Name | JTM45 (2245) | Series | Vintage Reissue | Tubes | 3 ECC83 (Preamp), 2 5881 (Power Amp) | Output | 30 Watts | OHMS | 16 | Speakers | n/a | Effects | n/a | Covering | Black Vinyl | Footswitch | n/a | Dimensions | 660x260x205mm | Weight | 14.6kg |
| EVOLUTION: No compromise, ultra low end, versatile ROCK/METAL amp. 4 channels lead to where no ENGL amp has gone before. The Sonic Evolution of ENGL sounds, from crystal clean to crispy crunch n tight fat rhythm to punchy lead sounds in conjunction with low bottom end to satisfy the needs of the modern guitarist. Rich harmonics and fast attack delivered by special built transformers to cut through on any stage or recording situation. |
100W HEAD guitar amplifier, 4 channels with digital Pre-amp & 4xEL34 Power Amp valves, 4 Modulation effects, 3 Delay effects, reverb. Footcontroller included.
Features - Power rating: 100W
- Preamp: Digital Natural Harmonic Technology
- Power amp tubes: 4 x EL34
- Preamp topologies: 16
- Modulation effects: Chorus, Phaser, Flanger, Tremolo
- Delay effects: Hi-Fi Analog, Tape, Multi
- Reverb: Independent custom voiced
- Midi Control: Midi in, Midi Thru
- Stompware controller: supplied
- Emulated line out: XLR
- Headphone out: 1/4" jack
- Line in: 1/4" jack
- Preamp: 1/4" jack
- Effects loop: Serial / Parallel -10dBV / +4dB with mix control
- Speaker output: 1x16 Ohm, 1x8 Ohm, 2x 16 Ohm
| With jangly cleans and high gain filth coexisting in perfect harmony, TH Series amplifiers excel whatever the situation. The Dirty channel features the same powerful Shape control first seen on our Thunderverb series, sweeping the midrange from scooped to boosted. Fine-tuning your distorted tones has never been easier or more rewarding. The Clean channel delivers sweet, crystalline cleans, right up to the point of breakup, whilst the Dirty channel remains unerringly focussed, steeped in complex harmonic overtones even at maximum gain settings.
The TH30 has proved to be one of the most popular heads in the Orange range, and with good reason. The sheer range of tones that can be dialed in from just six controls is nothing short of jawdropping whilst the quartet of EL84 valves convey their own crisp character, breaking up into rich overdrive when pushed to the limit. The switchable output section can be used to tailor the amp to the situation, scaling down from 30
to 15 or 7 Watts. The TH30 also features our low impedance valve buffered effects loop. |
The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.
Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.
- Product type: Amplifier
- Type: 2-channel
- Output power (1 kHz 4 ohms): 2 x 200 W
- Output power (1 kHz 8 ohms): 2 x 100 W
- Output power (1 kHz 8 ohms, bridged mode): 400 W
- Circuit concept: Class D dynamic
- Frequency response: 20 - 20,000 Hz
- THD:
- Voltage gain: 32 dB / 26 dB / 28 dB
- Input sensitivity: 0.68 V / 1.4 V / 1.2 V
- Protection: Soft-start, short-circuit, DC, overheating, overvoltage
- Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
- Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
- Line input connectors: 2 x XLR, 2 x 6.3 mm jack
- Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
- Cooling System: low-noise fan
- Power supply: switching power supply
- Power Consumption Full Load: 470 W
- Operating voltage: 115 V AC / 230 V AC (switchable)
- Width: 482 mm
- Height: 44 mm
- Depth: 244 mm
|
Reviews
There are no reviews yet.