ENGL Thunder 50 E325 Electric Guitar Tube Head 50W

The basic concept of the THUNDER series was just to strip the handling to the bone but deliver convincing sounds.There you go, these handy little workhorses will do any gig.Preamp:3 channels (3 ECC 83 preamp tubes), Clean, Crunch, Lead, single 3 band EQ, Crunch/Lead, Clean/Lead switches. Master section:Master volume, 50 watts (1 x EC83, 2 x 5881 power amp tubes. Outputs: Speaker outs (2 x 8, 2 x 16 Ohms), fx loop (parallel to serial adjustable), dual footswitch jacks (Z-3/Z -4).

The JVM Series 100-watt, valve-driven power stage is built on the classic design responsible for the legendary Marshall roar found in the JCM800, 2203 and "plexi" Super Lead amplifiers -- a timeless foundation for countless classic rock and metal guitar tones for over 4 decades. Featuring a quartet of EL34 valves, this peerless design has been expertly crafted to compliment the extraorinary wealth of tones found in the JVM.

Technical Info
Type: Head
Output (RMS): 100 watts
Channels: 4
Modes per Channel: 3
Independent Gain and Volume (per Ch): Yes
Independent Tone Network (per Ch): Yes
Independent Reverb Level (per Ch): Yes
Dual Programming Master Volumes: Yes
Silent Recording: Yes
Emulated Line Out XLR: Yes
Series FX Loop: Yes
Programmable Parallel/Series FX Loop: Yes
MIDI Presets: 128
Pre-Amp Valves: 4XECC83
Power Amp Valves: 1X ECC83, 4XEL34
6-way Programmable Footcontroller (Supplied) PEDL-00044
Dimensions (mm): 750 x 310 x 215
Weight (KG): 22
Speakers: No

The Palmer MACHT 402 is a 19" stereo power amplifier specially designed for guitar applications. It pumps out 200 watts per channel and 400 watts bridged to drive virtually all speaker cabinets. Featuring a highly efficient switch mode power supply and low noise fan the soft start class D design is protected against overvoltage, DC, short circuits and overheating.

Conventionally named, the channels' Hi and Low controls have been carefully tailored for guitar signals to provide extensive EQ facility, a wide variety of sounds and authentic tube power stage characteristics. In addition, the MACHT 402 sports rumble filtering, LED indicators, a 3-way sensitivity selector, built-in limiter and ground lift switch. With XLR and 6.35 mm inputs as well as Speakon compatible and 6.35 mm output connectors the Palmer MACHT 402 is the ideal power station for guitar preamps, small amps, modelers and even effects pedals.

• Product type: Amplifier
• Type: 2-channel
• Output power (1 kHz 4 ohms): 2 x 200 W
• Output power (1 kHz 8 ohms): 2 x 100 W
• Output power (1 kHz 8 ohms, bridged mode): 400 W
• Circuit concept: Class D dynamic
• Frequency response: 20 - 20,000 Hz
• THD:
• Voltage gain: 32 dB / 26 dB / 28 dB
• Input sensitivity: 0.68 V / 1.4 V / 1.2 V
• Protection: Soft-start, short-circuit, DC, overheating, overvoltage
• Controls: On/Off, Volume, High, Low, Mode (bridge / parallel / stereo), Ground Lift, Limiter, sensitivity
• Indicators: Power, Signal, Clip, Protect, Mode (bridge / parallel)
• Line input connectors: 2 x XLR, 2 x 6.3 mm jack
• Speaker output connections: 2 x Speakon-compatible, 3 x 6,3mm jack
• Cooling System: low-noise fan
• Power supply: switching power supply
• Power Consumption Full Load: 470 W
• Operating voltage: 115 V AC / 230 V AC (switchable)
• Width: 482 mm
• Height: 44 mm
• Depth: 244 mm

BUGERA captures the stunning sound of the 1960s with the V55, a combo whose modern touches put a wide palette of vintage tones at your fingertips. With a proud pair of 6L6 power tubes in the output stage, the V55 bathes your guitar in clean California sunshine.

Its 2-channel preamp takes you everywhere from warm blues to garage-shattering crunch. A heavy-duty footswitch (included) lets you switch between channels remotely. Choose triode mode for an urgent, aggressive tonal edge, or pentode mode for clean and loud sound. A dose of built-in reverb provides the finishing touch. V55's Impedance switch (4, 8 and 16 ohms) makes it compatible with virtually any speaker cabinet. A custom-designed, handmade 12" BUGERA speaker brings this amp's vintage voice home in style.

Also available in a head version, the V55HD is ideally suited for use with the 212V-BK speaker cabinet.
Rock on with the way-out sound of yesterday - the BUGERA V55.

• Hand-built 55-Watt guitar head driven by 2 x 6L6 tubes
• Way cool vintage look and feel
• Authentic 2-channel preamp design from the '60s featuring 3 x 12AX7 tubes-everything from purring blues to mind-blowing crunch
• Integrated high-class reverb with dedicated Reverb control
• Vintage Equalizer section with dedicated Bass, Mid, Treble and Presence controls
• Normal and Bright inputs for ultimate sound character to perfectly match your guitar
• Multi-gain stage Lead channel with Pre Gain, Post Gain and Master controls
• Amazing Mode switch to select between Triode or Pentode operation
• Heavy-duty footswitch for Channel and Reverb function included
• Impedance switch (4, 8 and 16 Ohms) to match virtually any speaker cabinet
• High-quality components and exceptionally rugged construction ensure long life

Info

NT50H-G2 Features: - Output Power: 50 Watts RMS into 8Ω or 16Ω. - Tube Complement: Preamp: 12AX7 (x3) Power amp: EL34 (x2) - Inputs/Outputs: Guitar input, FX Loop (Send/Return), D.I. Out, Foot switch, 1 x Speaker output (16 Ω), 1 x Speaker output (8 Ω) / 2 x Speaker output (16Ω). - Controls: Master Volume, BRIGHT/GIRTH channel switch, Reverb, Tone Cut, THICK switch, GIRTH channel ? ?Volume, Bass, Middle, Treble, Gain?, BRIGHT channel - ?Bass, Middle, Treble, Gain?, THICK. - Dimensions (W x D x H): 450 x 165 x 215 mm / 17.72 x 6.50 x 8.46 inches. - Weight: 12.2 kg / 26.90 lbs. - Options: VFS2A footswitch. - Accessories: Power cable, High Performance VOX Custom Speaker Cable (16AWG).