EUROLITE NH-100 HAZER MACHINE 1050W-NEW-

• Ultra-fast 1 minute ready time
• Shutdown cycle to prevent clogging
• Actors\' Equity/Broadway League ApprovedSpecifications Performance Coverage volume: 3800 m3 (134,196 ft3) per hour Operating time with 2.5 l of fluid (min/max): 20/70 Hours Ready time: 1-minute Continuous effect output Construction Housing: Steel & aluminum Color: Black Airflow control: Optional Air Director Heat exchanger: 900 W, thermally protected Blower fan: Integrated, 200-2500 RPM Fluid pump: Oscillating piston, high pressure Fluid management: Fluid out sensing, sealed for transportation Fluid reservoir: 2.5 l drop-in reservoir with quick-connect fitting Connections AC Power: Neutrik PowerCON DMX, link mode in/out: 5-pin locking XLR Remote control: 3-pin locking XLR Firmware: AVR socket Thermal Maximum ambient temperature (Ta max.): 40° C (104° F) Minimum ambient temperature (Ta min.): 5° C (41° F) Exterior surface temperature: 30° C (86° F) Maximum nozzle temperature: 290° C (554° F)

UNIQUE 2.1

The revolution
DMX as standard, variable output and haze density, minimal warming up time, easy handling, very low fluid consumption – these are only some of the features of the UNIQUE 2.1.

The haze machine UNIQUE 2.1 offers - among the features that already characterised the Unique 2 - an even more silent working.

The sound could be absorbed tremendously. Thus, the machine can be used in fields of operation where any sound is undesirable.

Due to the efficient fan, the haze can be distributed in the room quickly. A replaceable filter protects the fan against dirt.

With its variable output - whereas the haze density and also the output can be varied - the machine can be used in many fields: Any desired effect - from the finest mist to a thick haze, similar to fog - can be achieved.
Therefore the machine is able to fill small and big rooms or halls with a constant haze, creating the right atmosphere and excellently supporting lighting effects.

The very short warming up time of approx. 60 seconds means the UNIQUE 2.1 is ready for operation almost immediately.
A continuous output is guaranteed by the fact that the machine does not have to warm up during operation.

The pump and the fan of the machine can be adjusted separately in 99 steps. Thus the user is able to adjust the density and output exactly. A non-linear pump regulation make sure that the pump can be adjusted much better at the lower steps.

Due to the fact that the pump and the fan can be dampened, the sound of the UNIQUE 2.1 can be absorbed tremendously.
The machine can be used in fields of operation where any sound is undesirable.

The UNIQUE 2.1 can be controlled via DMX 512. Pump and fan can be adjusted separately. The connection is done with 5-pin-XLR plugs using two following control channels at the desk.
The DMX start address will be adjusted and saved with the buttons at the display. It will remain saved even if the machine is disconnected from the mains supply.

The machine can also be controlled analog (0 - 10V) via a lighting desk and/or via cable remote (option). The fan will be adjusted directly at the machine, the pump can be adjusted via the analog desk or remote. This connection is done with 3-pin-XLR plugs.

A stand-alone running is also possible. The adjustments are done directly at the machine.

With the internal Timer the haze time can be adjusted in Seconds, the wait time in Minutes and the output of the pump and fan in %.

With the HDCS an individual Profile for a Show can be programmed. Two Levels with the required pump and fan values along with a haze time can be adjusted. Additionally a pre-runtime can be programmed.

The control of the pump and fan, the adjusting of the DMX start address and also the adjusting of the Timer and the HDCS is achieved with buttons. The adjusted data can be read at the LED-Display.

The intelligent control of every single parameter by microprocessor guarantees trouble free operation of the machine.

A special fluid guarantees minimal fluid consumption, low running costs and an optimal haze effect. It is supplied in 2l, 10l- and 25l-canisters and in barrels with 220l.

One of the 2l-canisters guarantees up to 50 hours of continuous output.

• Minimal warm up time of only 60 seconds
• Minimal noise
• Pump and fan adjustable separately in 99 steps, therefore variable output (from the finest mist to a thick haze, similar to fog)
• Internal fan ensures quick and homogen distribution
• DMX as standard, analog (0-10V) and stand-alone running
• Control of the pump, fan and the adjusting of the DMX start address is achieved with buttons
• Internal Timer
• Haze-Density Control System
• Minimal fluid consumption (2l canister guarantees up to 50 hours continuous output)
• Made in Germany

• XLR-remote for analog control
• Diverter to divert the direction of the output
• Hanging set
• Flightcase

Compact fazer produces fine haze, operates with standard fluid

• Easy-to-use fazer
• Produces fine, translucent haze without nebulizing the room at the same time
• Ideal for accentuating light and laser beams
• Manual fog output
• Continuous output
• Fan grille with blue LED illumination, switchable
• Rugged metal housing
• Short warm-up time
• Output distance: Approx. 3 m
• With level indication
• Control via stand-alone; wired remote control
• Operates on water-based fluid
• Removable tank
• For application areas such as: Clubs/dancing school; Stage; mobile djs/entertainer; small rental
• Application possibility: Standing

Package contents

• 1 x device, 1 x user manual, 1 x power cord, 1 x remote control, 1 x container, 1 x filter

User's manual
Fixtures Library Daslight V3
Fixtures Library grandMA

Cameo INSTANT HAZER 1400 PRO
Hazer with microprocessor control