Faital Pro FP3FE25A – 3″ Speaker 20 W 8 Ohm

Original price was: €26.62.Current price is: €21.53. incl. GR VAT

In stock (can be backordered)

EAN: 4049521133251
Installments calculation
CompareAdd to wishlist Submit Better Price
3″ Speaker 20 W 8 Ohm Ferrite Specifications Product type Loudspeaker Chassis Type PA Nominal Diameter 3 “ Nominal Diameter 80 mm Voice Coil 0.75 “ Voice Coil 19 mm Overall diameter 82 mm Pitch Circle Diameter 92 mm Cut- out Measurement 73.6 mm Mounting holes 4 Diameter of fixing holes 6 mm Depth 54.5 […]

 

Read more

3″ Speaker 20 W 8 Ohm Ferrite

Specifications

Product type
Loudspeaker Chassis

Type
PA

Nominal Diameter
3 “

Nominal Diameter
80 mm

Voice Coil
0.75 “

Voice Coil
19 mm

Overall diameter
82 mm

Pitch Circle Diameter
92 mm

Cut- out Measurement
73.6 mm

Mounting holes
4

Diameter of fixing holes
6 mm

Depth
54.5 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
20 W

maximum rated load
40 W

Sensitivity (1 W / 1 m)
91 dB

Frequency response
100 – 20000 Hz

Voice Coil Material
Aluminum

Magnet
Neodymium

Depth of the magnetic gap
4 mm

Thiele & Small Parameter


Fs (Resonance Frequency)
110 Hz

Re (DC resistance)
6.2 Ohm(s)

Qms (mechanical quality)
4.1

Le (inductance of the voice coil)
0.07 mH

Qes (electrical quality)
0.8

Qts (overall quality)
0.7

Vas (equivalent volume)
0.8

Mms (moving mass)
2.4 g

BL (power factor)
3.6 T/m

Xmax (maximum displacement)
1.83 mm

Cms (elasticity of the suspension)
0.87 mm/N

Sd (membrane area)
30.2 cm²

Rms (mechanical loss resistance)
0.4 kg/s

Weight
0,545 kg
Weight 0.8 kg
Woofer Inch

Reviews

There are no reviews yet.

Be the first to review “Faital Pro FP3FE25A – 3″ Speaker 20 W 8 Ohm”

Your email address will not be published. Required fields are marked *

Quick Comparison

Faital Pro FP3FE25A - 3" Speaker 20 W 8 Ohm removeBMS BMS5C150L 5 C 150 L - 5" Ferrit Coaxial Speaker 130 W + 25 W 8 Ohms removeEminence EPRO5MRNA - 5" Speaker 65 W 8 Ohm PRO 5 MRN A removeJBL HF/LF CONTROL 24C 4" speaker replacement removeFaital Pro FP5FE100A Speaker FE Series 5'' 8 Ohm 80W removeBMS BMS5CN140L 5" Neodymium Coaxial Speaker 5CN140 130 W + 60 W 8 Ohm remove
NameFaital Pro FP3FE25A - 3" Speaker 20 W 8 Ohm removeBMS BMS5C150L 5 C 150 L - 5" Ferrit Coaxial Speaker 130 W + 25 W 8 Ohms removeEminence EPRO5MRNA - 5" Speaker 65 W 8 Ohm PRO 5 MRN A removeJBL HF/LF CONTROL 24C 4" speaker replacement removeFaital Pro FP5FE100A Speaker FE Series 5'' 8 Ohm 80W removeBMS BMS5CN140L 5" Neodymium Coaxial Speaker 5CN140 130 W + 60 W 8 Ohm remove
ImageFP3FE25A_3inch_speaker_faital pro
SKUFP3FE25ABMS5C150LEPRO5MRNAJBL-124-13000-00FP5FE100ABMS5CN140L
Rating
Price Original price was: €26.62.Current price is: €21.53. incl. GR VAT Original price was: €324.60.Current price is: €275.91. incl. GR VAT Original price was: €267.06.Current price is: €186.00. incl. GR VAT Original price was: €111.59.Current price is: €109.89. incl. GR VAT Original price was: €54.28.Current price is: €34.71. incl. GR VAT Original price was: €401.32.Current price is: €341.12. incl. GR VAT
Stock

In stock (can be backordered)

Available on backorder

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityIn stock (can be backordered)Available on backorderAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content3" Speaker 20 W 8 Ohm Ferrite Specifications
Product type
Loudspeaker Chassis

Type
PA

Nominal Diameter
3 "

Nominal Diameter
80 mm

Voice Coil
0.75 "

Voice Coil
19 mm

Overall diameter
82 mm

Pitch Circle Diameter
92 mm

Cut- out Measurement
73.6 mm

Mounting holes
4

Diameter of fixing holes
6 mm

Depth
54.5 mm

Nominal Impedance
8 Ohm(s)

Nominal Load Capacity
20 W

maximum rated load
40 W

Sensitivity (1 W / 1 m)
91 dB

Frequency response
100 - 20000 Hz

Voice Coil Material
Aluminum

Magnet
Neodymium

Depth of the magnetic gap
4 mm

Thiele & Small Parameter


Fs (Resonance Frequency)
110 Hz

Re (DC resistance)
6.2 Ohm(s)

Qms (mechanical quality)
4.1

Le (inductance of the voice coil)
0.07 mH

Qes (electrical quality)
0.8

Qts (overall quality)
0.7

Vas (equivalent volume)
0.8

Mms (moving mass)
2.4 g

BL (power factor)
3.6 T/m

Xmax (maximum displacement)
1.83 mm

Cms (elasticity of the suspension)
0.87 mm/N

Sd (membrane area)
30.2 cm²

Rms (mechanical loss resistance)
0.4 kg/s

Weight
0,545 kg
  • 90 dB sensitivity 1 W 11m
  • 130 W + 25 W Power handling
  • 1.5" + 1" voice coil
  • Single point source providing coherent wave front
  • 900 conical dispersion
  • Optimal for compact 2-way systems
Weighing a mere 2 lbs., the Pro 5MRN neodymium midrange / tweeter driver features a wide usable frequency range and water resistant epoxy treated paper cone for a warm, rich tone. The truncated cast frame chassis allows for tight placement in your pro audio or car audio cabinet, and pair it with a Kappalite model for the ultimate in ultra-light bass guitar performance. SPECIFICATION
  • Nominal Basket Diameter: 5“, 127 mm
  • Nominal Impedance*: 8 Ω
  • Power Rating**
  • Watts: 65 W
  • Music Program: 130 W
  • Resonance: 223 Hz
  • Usable Frequency Range: 325 Hz - 20 kHz
  • Sensitivity***: 93.1 dB
  • Magnet Weight: 4 oz.
  • Gap Height: 0.236“, 6 mm
  • Voice Coil Diameter: 1“, 25 mm
THIELE & SMALL PARAMETERS
  • Resonant Frequency (fs): 223 Hz
  • DC Resistance (Re): 5.45 Ω
  • Coil Inductance (Le): 0.18m H
  • Mechanical Q (Qms): 2.8
  • Electromagnetic Q (Qes): 0.93
  • Total Q (Qts): 0.7
  • Compliance Equivalent Volume (Vas): 0.85 liters / 0.03 cu.ft.
  • Peak Diaphragm Displacement Volume (Vd): 3.6 cc
  • Mechanical Compliance of Suspension (Cms): 0.12 mm/N
  • BL Product (BL): 5.84 T-M
  • Diaphragm Mass Inc. Airload (MMs): 4 grams
  • Efficiency Bandwidth Product (EBP): 239
  • Maximum Linear Excursion (Xmax): 0.51 mm
  • Surface Area of Cone (Sd): 71.3 cm2
  • Maximum Mechanical Limit (Xlim): 5.0 mm
MOUNTING INFORMATION
  • Recommended Enclosure Volume
  • Sealed: 0.85-1.56 liters / 0.03-0.06 cu.ft.
  • Vented: - liters / - cu.ft.
  • Driver Volume Displaced: 0.494 cu.ft. / 14 liters
  • Overall Diameter: 5.25“, 133.4 mm
  • Baffle Hole Diameter: 4.28“, 108.7 mm
  • Front Sealing Gasket: Yes
  • Rear Sealing Gasket: Yes
  • Mounting Holes Diameter: 0.18“, 4.6mm
  • Mounting Holes B.C.D.: 4.79“, 121.7mm
  • Depth: 2.16“, 54.8 mm
  • Net Weight: 2 lbs, 0.91 kg
  • Shipping Weight: 2.2 lbs, 1 kgs
MATERIALS OF CONSTRUCTION
  • Coil Construction: Pure aluminum voice coil
  • Coil Former: Kapton former
  • Magnet Composition: Neodymium magnet
  • Core Details: Vented and Extended core
  • Basket Materials: Die-cast aluminum basket
  • Cone Composition: Treated paper cone
  • Cone Edge Composition: Cloth cone edge
  • Dust Cap Composition: Treated paper dust cap

JBL Control 24 Series Driver Description: This (MPN 124-13000-00) is a replacement JBL Control 24 series coaxial driver.

This is a replacement JBL Control 24 series coaxial driver. It has a set of input spades for the LF part and a separate pair of wires exiting thru the back of the magnet to reach the voice coil of the HF unit. Compact and tough, a mighty reproducer in a small package. Remember, it does not include a crossover network. It is intended as a replacement for a blown unit in a JBL Control 24 series unit...you hobbiests will have to provide the external crossover that is already in the Control 24 mounting container. The opening for a front load is 3.5+" with the overall depth of 4" and 3.16" remaining under the baffle. It is a genuine replacement part and it is shipped to you sealed just the way we get it from JBL.

Faital Pro 5 FE 100 A
5" Speaker 80 W 8 Ohms Product type Loudspeaker Chassis


Type PA
Nominal Diameter 5 "
Nominal Diameter 130 mm
Voice Coil 1.26 "
Voice Coil 32 mm
Overall diameter 124.5 mm
Pitch Circle Diameter 133 mm
Cut- out Measurement 114 mm
Mounting holes 4
Diameter of fixing holes 6 mm
Depth 65 mm
Nominal Impedance 8 Ohm(s)
Nominal Load Capacity 80 W
maximum rated load 160 W
Sensitivity (1 W / 1 m) 88 dB
Frequency response 65 - 6300 Hz
Voice Coil Material copper
Magnet Ferrite
Depth of the magnetic gap 6 mm
Thiele & Small Parameter
Fs (Resonance Frequency) 65 Hz
Re (DC resistance) 5.4 Ohm(s)
Qms (mechanical quality) 8.18
Le (inductance of the voice coil) 0.53 mH
Qes (electrical quality) 0.47
Qts (overall quality) 0.44
Vas (equivalent volume) 5.16
Mms (moving mass) 10.5 g
BL (power factor) 6.9 T/m
Xmax (maximum displacement) 5.25 mm
Cms (elasticity of the suspension) 0.55 mm/N
Sd (membrane area) 79.8 cm²
Rms (mechanical loss resistance) 0.57 kg/s
Weight 1,12 kg



  • 91 dB sensitivity 1 W / 1 m
  • 130 W + 60 W Power Handling
  • 1.5" + 1.5“ Copper Voice Coil
  • Single Point Source providing coherent Wave Front
  • 90° conical Dispersion
  • Optimal for compact 2-way Systems
Weight0.8 kg1.80 kg0.91 kg1.00 kg1.50 kg1.14 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 0.8 kg
Woofer Inch

Weight 1.80 kg
Woofer Inch

Weight 0.91 kg
Woofer Inch

Weight 1.00 kg
Woofer Inch

Weight 1.50 kg
Woofer Inch

Weight 1.14 kg
Woofer Inch