Faital Pro FP6PR150RK Recone Kit for FP6PR150 6″ 8 Ohms 150W

61.92 incl. GR VAT

Available on backorder

EAN: 4049521114366
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 4-10 d. Available in 4-10 d. SKU: FP6PR150RK Category:
Recone kit for FP6PR150

 

Read more

Recone kit for FP6PR150

Weight 1.00 kg

Reviews

There are no reviews yet.

Be the first to review “Faital Pro FP6PR150RK Recone Kit for FP6PR150 6″ 8 Ohms 150W”

Your email address will not be published. Required fields are marked *

Quick Comparison

Faital Pro FP6PR150RK Recone Kit for FP6PR150 6" 8 Ohms 150W removeCELESTION T5641 MID-RANGE 6.5'' NTR06-1705B PRO AUDIO 150W removeB & C Speakers 6-PS38 Woofer 6 inch 300w program/94dB/W/m-70-5000Hz removeEMINENCE EA6A ALPHA-6 6'' 100 W 8 Ohm SPEAKER removeFaital Pro FP6FE100A Speaker FE Series 6'' 8 Ohm 100W removeB & C Speakers 6-PEV13 Woofer 6.5'' 240W remove
NameFaital Pro FP6PR150RK Recone Kit for FP6PR150 6" 8 Ohms 150W removeCELESTION T5641 MID-RANGE 6.5'' NTR06-1705B PRO AUDIO 150W removeB & C Speakers 6-PS38 Woofer 6 inch 300w program/94dB/W/m-70-5000Hz removeEMINENCE EA6A ALPHA-6 6'' 100 W 8 Ohm SPEAKER removeFaital Pro FP6FE100A Speaker FE Series 6'' 8 Ohm 100W removeB & C Speakers 6-PEV13 Woofer 6.5'' 240W remove
Image
SKUFP6PR150RKT56416-PS38EA6AFP6FE100A6PEV13
Rating
Price 61.92 incl. GR VAT 124.00 incl. GR VAT 126.00 incl. GR VAT 87.23 incl. GR VAT44.39 incl. GR VAT110.00 incl. GR VAT
Stock

Available on backorder

Available on backorder

Available on backorder

Only 2 left in stock

Available on backorder

Available on backorder

AvailabilityAvailable on backorderAvailable on backorderAvailable on backorderOnly 2 left in stockAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Recone kit for FP6PR150

  • 6.5-inch neodymium magnet mid-range driver with 1.75" voice coil, providing 150Wrms (AES) continuous power handling
  • Suitable for line array applications, utilising a space efficient chassis profile
  • FEA optimised flux distribution in the magnet assembly provides low harmonic distortion
  • M-roll surround provides progressive excursion control, generating a smooth frequency response
  • Intelligent heat management in both chassis and magnet assembly design offers reduced thermal distortion
Nominal diameter (mm/in) 165/6.5
Power Rating (AES, W rms) 150
Nominal impedance (Ω) 8
Voice coil diameter (mm/in) 44.5/1.75
Magnet type Neodymium
Chassis type Cast aluminium
Sensitivity (dB) 95.5
Frequency range (Hz) 150-7000
Coil material Copper clad Aluminium
Cone material Kevlar loaded paper
Surround material Cloth-sealed
Suspension Single
Xmax (mm/in) 2.5/0.098
Gap depth (mm/in) 6.0/0.24
Voice coil winding width (mm/in) 11.0/0.43
Small Signal Parameters
D (m/in) 0.13/5.12
Fs (Hz) 109.6
Mmd (g/oz) 12.069/0.422
Mair 0.857/0.03
Qms 2.632
Qes 0.527
Qts 0.439
Re (Ω) 5.95
Vas (lt/ft3) 4.062/0.143
BI (Tm) 10.03
Cms (mm/N) 0.163
Rms (kg/s) 3.385
Le (mH)
Mounting Information
Overall diameter (mm/in) 189/7.44
Overall depth (mm/in) 71/2.79
Cut-out diameter (mm/in) 145/5.7
Mounting slot dimensions (mm/in) 5.5/0.22 x 7.5/0.3
Number of mounting slots 4
Mounting slot PCD range (mm/in) 172/6.77
Unit weight (kg/lb) 0.85/1.87
Packed Dimensions and Weight
Single pack size W x D x H (mm/in) -
Single pack weight (kg/lb) -
Multipack () size W x D x H (mm/in) -
Multipack () weight (kg/lb) -

Unit conditioned prior to measurement.


Woofer 6" 300w program/94dB/W/m-70-
5000Hz.

300 W continuous program power capacity
38 mm (1.5 in) aluminium voice coil
70 - 5000 Hz response
94 dB sensitivity

Specification
Nominal Diameter 170 (6.5) mm (in)
Nominal Impedance (1) 8 Ohm
Minimum Impedence 6.6 Ohm
Nominal Power Handling (2) 150 W
Continuous Power Handling (3) 300 W
Sensitivity (1W/1m) (4) 94 dB
Frequency Range 70 - 5000 Hz
Voice Coil Diameter 38 (1.5) mm (in)
Winding Material Copper
Former Material Glass Fibre
Winding Depth 12.5 (1/2) mm (in)
Magnetic Gap Depth 6 (0.25) mm (in)
Flux Density 1.4 T


Thiele & Small Parameters
Fs 75 Hz
Re 5.4 Ohm
Qes 0.31
Qms 11.7
Qts 0.3
Vas 8 (0.28) dm3 (ft3)
Sd 132 (20.5) cm2 (in2)
Eta Zero 1 %
Xmax +/- 6 mm
Xvar +/- 7.5 mm
Mms 14 g
Bl 10.8 Txm
Le 0.6 mH


Mounting and Shipping Info
Overall Diameter 187 mm (7.4 in)
Bolt Circle Diameter 172 mm (6.7 in)
Baffle Cutout Diameter 145 mm (5.7 in)
Depth 82 mm (3.2 in)
Flange and Gasket Thickness 9 mm (0.35 in)
Net Weight 2.2 kg (4.8 lb)
Shipping Weight (4 units) 10.1 kg (22.2 lb)
Shipping Box (4 units) 405x225x210 mm
(15.9x8.8x8.3 in)
1For different impedances, please ask.
22 hours test made with continuous pink noise signal (6 dB crest factor).
Power calculated on rated minimum impedance.
3Power on Continuous Program is defined as 3 dB greater than the
Nominal rating.
4Applied RMS Voltage is set to 2.83V for 8 ohms Nominal Impedance.

ALPHA- Serie 100W- 200W Recommended for professional audio mid-range applications in a sealed cabinet, or as a mid-bass in a vented satellite enclosure. SPECIFICATION
  • Nominal Basket Diameter 6.5“, 165 mm
  • Nominal Impedance 8 ohms
  • Power Rating Watts 100 W / Music Program 200 W
  • Resonance 118 Hz
  • Usable Frequency Range 85 Hz - 6 kHz
  • Sensitivity 93.6
  • Magnet Weight 20 oz.
  • Gap Height 0.25“, 6.35 mm
  • Voice Coil Diameter 1.5“, 38.1 mm
THIELE & Small Parameters
  • Resonant Frequency (fs) 118 Hz
  • DC Resistance (Re) 7.2
  • Coil Inductance (Le) 0.19 mH
  • Mechanical Q (Qms) 5.68
  • Electromagnetic Q (Qes) 0.60
  • Total Q (Qts) 0.54
  • Compliance Equivalent Volume (Vas) 5.8 liters / 0.2 cu. ft.
  • Peak Diaphragm Displacement Volume (Vd) 44cc
  • Mechanical Compliance of Suspension (Cms) 0.26 mm/N
  • BL Product (BL) 8.0 T-M
  • Diaphragm Mass inc. Airload (Mms) 7 grams
  • Efficiency Bandwidth Product (EBP) 197 Maximum Linear Excursion (Xmax) 3.5 mm
  • Surface Area of Cone (Sd) 126.7 cm²
  • Maximum Mechanical Limit (Xlim) 4.0 mm
MOUNTING Information
  • Recommended Enclosure Volume Sealed 2.8-5.7 liters / 0.1-0.2 cu. ft. Vented 3.4-15.6 liters / 0.12-0.55 cu. ft.
  • Overall Diameter 6.59“, 167.4 mm
  • Baffle Hole Diameter 5.69“, 144.5 mm
  • Front Sealing Gasket fitted as standard
  • Rear Sealing Gasket fitted as standard
  • Mounting Holes Diameter 0.23“, 5.7 mm
  • Mounting Holes B.C.D. 6.06“, 154 mm
  • Depth 2.8“, 71 mm
MATERIALS of Construction
  • Copper voice coil
  • Polyimide former
  • Ferrite magnet
  • Vented and extended core
  • Pressed steel basket
  • Paper Cone
  • Cloth cone edge
  • Solid composition paper dust cap

Nominal Diameter     160 mm (6 in)
Overall Diameter     181.2/164 mm (7.13/6.46 in)
Bolt Circle Diameter     167 mm (6.57 in)
Baffle Cutout Diameter     147 mm (5.79 in)
Depth     84.5 mm (3.33 in)
Flange and Gasket Thickness     8 mm (0.31 in)
Net Weight     1.2 Kg (2.64 lb)
Shipping Box
(Single Carton Box - 4 units)     380x393x128 mm (14.9x15.47x5.03 in)
Shipping Weight (4 units)     5.6 Kg (13.82 lb)

Nominal Impedance     8 Ohm
Minimum Impedance     5.9 Ohm
Nominal Power Handling ***     100 W
Maximum Power Handling ****     200 W
Sensitivity (1W/1m)     91 dB
Frequency Range     63÷5000 Hz
Voice Coil Diameter     32 mm (1.26 in)
Winding Material     Cu
Former Material     Kapton
Winding Depth     12.5 mm (0.49 in)
Magnetic Gap Depth     6 mm (0.24 in)
Flux Density     1 T

Fs     61 Hz
Re     5.4 Ohm
Qes     0.6
Qms     6
Qts     0.54
Vas     14.8 dm^3 (0.52 ft^3)
Sd     137 cm^2 (21.23 in^2)
Xmax *     5.25 mm
Xdamage **     13.15 mm
Mms     14 g
Bl     6.8 N/A
Le     0.5 mH
Mmd     13 g
Cms     0.56 mm/N
Rms     0.84 Kg/s
Eta Zero     0.46 %
EBP     102 Hz

B&C 6PEV13 6-1/2" Midrange Speaker B&C's 6PEV13 6-1/2" midrange speaker features great sensitivity and very smooth response from 400 Hz to 8 kHz. An aluminum phase plug increases the 6PEV13's axial sensitivity and controls its high frequency dispersion. Aluminum voice coil on fiberglass former.   Product Specifications
  • Nominal Diameter6-1/2“
  • Power Handling (RMS)120 Watts
  • Power Handling (max)240 Watts
  • Impedance8 ohms
  • Frequency Response150 to 8,000 Hz
  • Sensitivity99 dB 1W/1m
  • Voice Coil Diameter1.5“
Thiele-Small Parameters
  • Resonant Frequency (Fs)126 Hz
  • DC Resistance (Re)5.2 ohms
  • Voice Coil Inductance (Le)0.6 mH
  • Mechanical Q (Qms)4.6
  • Electromagnetic Q (Qes)0.39
  • Total Q (Qts)0.36
  • Compliance Equivalent Volume (Vas)0.21 ft.³
  • BL Product (BL)8.2 Tm
  • Diaphragm Mass Inc. Airload (Mms)6g
  • Maximum Linear Excursion (Xmax)0.6 mm
  • Surface Area of Cone (Sd)132 cm²
Materials of Construction
  • Cone MaterialPaper
  • Surround MaterialFoam
  • Voice Coil Wire MaterialAluminum
  • Voice Coil FormerFiberglass
  • Basket / Frame MaterialCast Aluminum
  • Magnet MaterialNeodymium
Mounting Information
  • Overall Outside Diameter7.4“
  • Baffle Cutout Diameter5.7“
  • Depth3.1“
  • Bolt Circle Diameter6.7“
  • # Mounting Holes4
Optimum Cabinet Size (determined using BassBox 6 Pro High Fidelity suggestion)
  • Sealed Volume0.04 ft.³
  • Sealed F3299 Hz
  • Vented Volume0.11 ft.³
  • Vented F3174 Hz
Weight1.00 kg0.85 kg2.20 kg1.75 kg5.60 kg2.00 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information
Weight 1.00 kg
Weight 0.85 kg
Weight 2.20 kg
Weight 1.75 kg
Weight 5.60 kg
Weight 2.00 kg