FAITAL PRO FP8PR210A Professional Series – 8″ Speaker 200 W 8 Ohm

Nominal Specifications

• Nominal Diameter 8“, 200 mm
• Overall Diameter 8.81/8.18“, 223.7/207.9 mm
• Bolt Circle Diameter 8.27“, 210 mm
• Baffle Cutout Diameter 7.20“, 183 mm
• Depth 3.88“, 98.5 mm
• Flange and Gasket Thickness 0.43“, 10.8 mm

• Minimum Impedance 7 Ohm
• Nominal Impedance 8 Ohm
• Nominal Power Handling*** 200 W
• Maximum Power Handling**** 400 W
• Sensitivity (1W/1m) 95 dB
• Frequency Range 70 - 5000 Hz
• Voice Coil Diameter 2“, 52 mm
• Winding Material Aluminium
• Former Material Glass Fiber
• Winding Depth 0.65“, 16.5 mm
• Magnetic Gap Depth 0.31“, 8 mm
• Flux Density 1.15 T

• Resonant Frequency (fs) 65 Hz
• DC Resistance (Re) 5.7 Ohm
• BL Product (BL) 13.5 N/A
• Diaphragm Mass inc. Airload (Mms) 25,3 grams
• Mechanical Compliance of Suspension (Cms) 0.24 mm/N
• Rms 3.38 Kg/s
• Electromagnetic Q (Qes) 0.32
• Mechanical Q (Qms) 3.1
• Total Q (Qts) 0.29
• Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
• Surface Area of Cone (Sd) 30.38“², 196 cm²
• Maximum Linear Excursion (Xmax)* 6.92 mm
• Xdamage** 15.7 mm
• Coil Inductance (Le) 0.46 mH
• Diaphragm mass (Mmd) 23.7 g
• Eta Zero 1.06 %

Notes

• *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
• **Maximum excursion before permanent damage
• ***2 Hours Test According to AES 2-1984 Rev. 2003
• ****Maximum power is defined as 3dB greater than nominal power

Nominal Specifications

    * Nominal Diameter 8“, 200 mm
    * Overall Diameter 8.81/8.18“, 223.8/207.9 mm
    * Bolt Circle Diameter 8.27“, 210 mm
    * Baffle Cutout Diameter 7.24“, 184 mm
    * Depth 4.59“, 116.7 mm
    * Flange and Gasket Thickness 0.42“, 10.7 mm


Electrical Specifications

    * Minimum Impedance 5.9 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 200 W
    * Maximum Power Handling**** 400 W
    * Sensitivity (1W/1m) 92 dB
    * Frequency Range 80 - 5000 Hz
    * Voice Coil Diameter 2“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.76“, 19.3 mm
    * Magnetic Gap Depth 0.27“, 7 mm
    * Flux Density 1.05 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 74 Hz
    * DC Resistance (Re) 5.1 Ohm
    * BL Product (BL) 8.9 N/A
    * Diaphragm Mass inc. Airload (Mms) 23 grams
    * Mechanical Compliance of Suspension (Cms) 0.2 mm/N
    * Rms 2 Kg/s
    * Electromagnetic Q (Qes) 0.69
    * Mechanical Q (Qms) 5.30
    * Total Q (Qts) 0.61
    * Compliance Equivalent Volume (Vas) 0.32 ft³, 9 dm³
    * Surface Area of Cone (Sd) 27.5“², 177.3 cm²
    * Maximum Linear Excursion (Xmax)* 8.48 mm
    * Xdamage** 12.9 mm
    * Coil Inductance (Le) 0.6 mH
    * Diaphragm mass (Mmd) 21.6 g
    * Eta Zero 0.5 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power

Product type Loudspeaker Chassis

500 W continuous program power capacity 100° nominal coverage 70 - 18000 Hz response 97dB sensitivity Single Neodymium magnet assembly

50 mm (2 in) copper voice coil
70 - 3000 Hz response
94 dB sensitivity
Neodymium magnet allows a very light yet powerful motor assembly
Shorting copper cap for extended HF response
400 W continuous program power capacity
Ventilated voice coil gap for reduced power compression

Compatible with NEXO PS8 

• Specifications
  • Nominal diameter200 mm (8.0 in)
  • Nominal impedance8 Ω
  • Minimum impedance6.6 Ω
  • Nominal power handling *200 W
  • Continuous power handling *400 W
  • Sensitivity (1W/1m) *94.0 dB
  • Frequency range65 - 3000 Hz
  • Voice coil diameter51 mm (2.0 in)
  • Winding materialCopper
  • Former materialGlass Fibre
  • Winding depth17 mm (0.65 in)
  • Magnetic gap depth8 mm (0.31 in)
  • Flux density1.05 T
• Design
  • Surround shapeDouble Roll
  • Cone shapeExponential
  • Magnet materialNeodymium Inside Slug
  • SpiderSingle
  • Pole designStraight Pole
  • Woofer cone treatmentTWP Waterproof Both Sides
  • Recommended enclosure14.0 dm3 (0.49 ft3)
  • Recommended tuning65 Hz
• Parameters *
  • Fs66 Hz
  • Re5.3 Ω
  • Qes0.41
  • Qms3.6
  • Qts0.37
  • Vas14.0 dm3 (0.5 ft3)
  • Sd220.0 cm2 (34.1 in2)
  • η₀1.0 %
  • Xmax7.0 mm
  • Xvar7.0 mm
  • Mms28 g
  • Bl12.4 Txm
  • Le0.5 mH
  • EBP160 Hz
• Mounting And Shipping Info
  • Overall diameter225 mm (8.8 in)
  • Bolt circle diameter210 mm (8.3 in)
  • Baffle cutout diameter187.0 mm (7.4 in)
  • Depth90 mm (3.5 in)
  • Flange and gasket thickness11 mm (0.4 in)
  • Air volume occupied by driver1.1 dm3 (0.04 ft3)
  • Net weight1.8 kg (4.0 lb)
  • Shipping units1
  • Shipping weight2.2 kg (4.8 lb)
  • Shipping box300x160x180 mm (11.8x6.3x7.1 in)

Nominal Specifications

    * Nominal Diameter 8“, 200 mm
    * Overall Diameter 8.81/8.18“, 223.8/207.9 mm
    * Bolt Circle Diameter 8.27“, 210 mm
    * Baffle Cutout Diameter 7.24“, 184 mm
    * Depth 4.59“, 116.7 mm
    * Flange and Gasket Thickness 0.42“, 10.7 mm


Electrical Specifications

    * Minimum Impedance 6.5 Ohm
    * Nominal Impedance 8 Ohm
    * Nominal Power Handling*** 150 W
    * Maximum Power Handling**** 300 W
    * Sensitivity (1W/1m) 94 dB
    * Frequency Range 80 - 6300 Hz
    * Voice Coil Diameter 2“, 52 mm
    * Winding Material Aluminium
    * Former Material Glass Fiber
    * Winding Depth 0.53“, 13.5 mm
    * Magnetic Gap Depth 0.31“, 8 mm
    * Flux Density 1 T


THIELE & SMALL Parameters

    * Resonant Frequency (fs) 76 Hz
    * DC Resistance (Re) 5.8 Ohm
    * BL Product (BL) 9.86 N/A
    * Diaphragm Mass inc. Airload (Mms) 20.9 grams
    * Mechanical Compliance of Suspension (Cms) 0.2 mm/N
    * Rms 2.11 Kg/s
    * Electromagnetic Q (Qes) 0.59
    * Mechanical Q (Qms) 4.72
    * Total Q (Qts) 0.53
    * Compliance Equivalent Volume (Vas) 0.42 ft³, 11.9 dm³
    * Surface Area of Cone (Sd) 31“², 200 cm²
    * Maximum Linear Excursion (Xmax)* 5.42 mm
    * Xdamage** 12 mm
    * Coil Inductance (Le) 0.55 mH
    * Diaphragm mass (Mmd) 19.4 g
    * Eta Zero 0.85 %

Notes

    * *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
    * **Maximum excursion before permanent damage
    * ***2 Hours Test According to AES 2-1984 Rev. 2003
    * ****Maximum power is defined as 3dB greater than nominal power