| Content |
Nominal Specifications - Nominal Diameter 8“, 200 mm
- Overall Diameter 8.81/8.18“, 223.7/207.9 mm
- Bolt Circle Diameter 8.27“, 210 mm
- Baffle Cutout Diameter 7.20“, 183 mm
- Depth 3.88“, 98.5 mm
- Flange and Gasket Thickness 0.43“, 10.8 mm
Electrical Specifications - Minimum Impedance 7 Ohm
- Nominal Impedance 8 Ohm
- Nominal Power Handling*** 200 W
- Maximum Power Handling**** 400 W
- Sensitivity (1W/1m) 95 dB
- Frequency Range 70 - 5000 Hz
- Voice Coil Diameter 2“, 52 mm
- Winding Material Aluminium
- Former Material Glass Fiber
- Winding Depth 0.65“, 16.5 mm
- Magnetic Gap Depth 0.31“, 8 mm
- Flux Density 1.15 T
THIELE & SMALL Parameters - Resonant Frequency (fs) 65 Hz
- DC Resistance (Re) 5.7 Ohm
- BL Product (BL) 13.5 N/A
- Diaphragm Mass inc. Airload (Mms) 25,3 grams
- Mechanical Compliance of Suspension (Cms) 0.24 mm/N
- Rms 3.38 Kg/s
- Electromagnetic Q (Qes) 0.32
- Mechanical Q (Qms) 3.1
- Total Q (Qts) 0.29
- Compliance Equivalent Volume (Vas) 0.46 ft³, 12.9 dm³
- Surface Area of Cone (Sd) 30.38“², 196 cm²
- Maximum Linear Excursion (Xmax)* 6.92 mm
- Xdamage** 15.7 mm
- Coil Inductance (Le) 0.46 mH
- Diaphragm mass (Mmd) 23.7 g
- Eta Zero 1.06 %
Notes
- *Xmax = [(winding depth - magnetic gap depth) / 2] + (magnetic gap depth / 3)
- **Maximum excursion before permanent damage
- ***2 Hours Test According to AES 2-1984 Rev. 2003
- ****Maximum power is defined as 3dB greater than nominal power
|
- 93 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Sandwich Voice Coil
- Single Point Source providig coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2- or 3-way Systems
|
- 96 dB Sensitivity 1 W / 1 m
- 200 W Power Handling
- 2" Aluminium Sandwich Voice Coil for low Power Compression
- Double treated Cone for Water Protection
- Neodymium Magnet System
- Triple Aluminum demodulating Rings for ultra low Distortion
- Optimal for compact 2- or 3-way Systems
|
-
- 8” neodymium magnet driver with 1.5” voice coil, providing 200Wrms (AES) continuous power handling
- Suitable for line array applications, utilizing a space-efficient octagonal chassis profile
- Optimized flux distribution in the magnet assembly provides low harmonic distortion
- M-roll surround provides progressive excursion control, generating a smooth frequency response
- Intelligent heat management in both chassis and magnet assembly design offers reduced thermal compression
General specifications
| Nominal diameter (mm/in) |
203/8 |
| Power Rating (AES, W rms) |
200 |
| Nominal impedance (Ω) |
8 |
| Voice coil diameter (mm/in) |
50.8/2.0 |
| Magnet type |
Neodymium |
| Chassis type |
Cast aluminium |
| Sensitivity (dB) |
92 |
| Frequency range (Hz) |
70-6000 |
| Coil material |
Round copper |
| Cone material |
Kevlar loaded paper |
| Surround material |
Cloth-sealed |
| Suspension |
Single |
| Xmax (mm/in) |
4/0.16 |
| Gap depth (mm/in) |
8.0/0.32 |
| Voice coil winding width (mm/in) |
15.0/0.63 |
Small Signal Parameters
| D (m/in) |
0.17 |
| Fs (Hz) |
80.3 |
| Mmd (g/oz) |
22.39 |
| Mair |
1.94 |
| Qms |
1.33 |
| Qes |
0.59 |
| Qts |
0.41 |
| Re (Ω) |
5.85 |
| Vas (lt/ft3) |
11.3/0.399 |
| BI (Tm) |
11.22 |
| Cms (mm/N) |
0.16 |
| Rms (kg/s) |
9.6 |
| Le (mH) |
|
Mounting Information
| Overall diameter (mm/in) |
225/8.8 |
| Overall depth (mm/in) |
100/4.16 |
| Cut-out diameter (mm/in) |
187/7.4 |
| Mounting slot dimensions (mm/in) |
6.5/0.26 |
| Number of mounting slots |
8 |
| Mounting slot PCD/ width accross flats |
210/8.3 |
| Unit weight (kg/lb) |
1.52/3.34 |
|
500 W continuous program power capacity 100° nominal coverage 70 - 18000 Hz response 97dB sensitivity Single Neodymium magnet assembly |
- 95.5 dB sensitivity 1 W / 1 m
- 200 W + 80 W Power Handling
- 2" + 1.75" Aluminum Sandwich Voice Coil
- Single Point Source providing coherent Wave Front
- 90° conical Dispersion
- Optimal for compact 2-way Systems
- Ligh weight Carbon Fiber Diaphragm
|
Reviews
There are no reviews yet.