The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed ‘from the ground up’ in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz – 20KHz -6dB
Low Frequency woofer:
5 – 1 coil inch
High Frequency driver:
1 dome – 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 – 6.69×10.82×7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 – 9.44×13.58×9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
Weight
4.00 kg
Reviews
There are no reviews yet.
Be the first to review “FBT JOLLY J5A Active Speaker 2-way 120W” Cancel reply
The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line. The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.
These amplifiers have been designed 'from the ground up' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.
The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.
The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.
Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind. The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology. This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.
These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.
The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices. You can also daisy chain these speaker together if required. Ideal for many application of today’s modern DJ.
Code:
37687 / 37905 White
Configuration:
2 way
Built-in amplifier LF/HF:
80/40 W RMS
Built-in amplifier peak LF/HF:
160/80 W
Frequency response:
80Hz - 20KHz -6dB
Low Frequency woofer:
5 - 1 coil inch
High Frequency driver:
1 dome - 0.75 coil inch
Maximum SPL cont/peak:
113 / 117 dB
Dispersion:
90° x 90° HxV
Input impedance:
22 Kohm
Crossover Frequency:
3.5 KHz
AC Power requirements:
75 VA
Input connector:
XLR combo with loop
Power cord:
5 / 16.4 m/ft
Net Dimension (WxHxD):
170x275x180 - 6.69x10.82x7.08 mm/inch
Net Weight:
3.4 / 7.49 Kg/lb
Transport Dimension (WxHxD):
240x345x235 - 9.44x13.58x9.25 mm/inch
Transport Weight:
4.2 / 9.25 Kg/lb
LD Systems Roadboy 65 HS B6 Portable PA Speaker with Headset
The compact, flexible sound system for small events, conferences, multimedia applications, podium discussions, schools, churches, etc.
The ultra-compact battery-powered combo amplifier, measuring 30 cm x 22 cm and weighting only 5 kg, provides an impressive sound pressure level of 110 dB max. Despite its small format, this mobile all-in-one speaker box provides great audibility and is equipped with unique features.
Product type
Battery-powered PA speaker
Low/mid driver dimensions
6.5 "
Woofer Size
165.1 mm
Woofer type
Broadband speaker
Woofer magnet
Ferrite
Woofer brand
Custom-made
Amplifier
Class D
RMS
25 W
Peak power
100 W
Frequency response
80 - 15.000 Hz
SPL (1W/1m)
93 dB
Max. SPL
110 dB
Protection circuits
short circuit
Controls
Bass , Line Gain , Master , Mic Gain , Power , Treble , Voice priority on / off
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
2
Line input connectors
RCA
Mic inputs
1
Mic inputs
6.3 mm Jack
Line outputs
2
Line output connectors
RCA
Loudspeaker outputs
1
Speaker output connections
6.3 mm Jack
Transmission frequency range
655 - 679 MHz
Operating voltage
External 100- 240 V AC switch mode power supply
Operating voltage
15 - 18 V DC, 3 A
Rechargeable batteries
12 V / 2.6 AH
Cabinet material
polypropylene
Cabinet construction
vented
Width
200 mm
Height
300 mm
Depth
230 mm
Weight
6 kg
Other features
16 mm stand mount , transport handle
SDQ5P is a stereo loudspeaker set with 1 active and 1 passive loudspeaker that stands for reliability, affordability, dynamic music and detailed voice reproduction! The active stereo amplifier loudspeaker has a low distortion high efficiency 5.25” woofer and one output is fed to the second linkable passive loudspeaker.
The SDQ5P active loudspeaker is equipped with volume and tone controls, accurate clip indicators and a stereo 2 x 30 watts amplifier. This amplifier comes with high quality balanced inputs, a stereo RCA cinch input and a mini stereo jack input (PC, MP3 player ...). The balanced input allows long signal line without interference. You will not hear any hum or buzz, because there will be no ground loop issues when connecting the SDQ5P with notoriously difficult laptops, LCD projectors or interactive white boards.
These loudspeakers will give you a variety of sound possibilities when used in conjunction with a flat screen, projector or smart board. With their magnetic shielding these loudspeakers are the ideal and cost effective audio solution for your classroom, boardrooms or meeting room. Due to its stylish design, a seamless integration into every interior is assured.
The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 6,5" Installation Monitor Active:
LD Systems Roadman 102 HS Portable PA Speaker with Headset Microphone
The LD Systems Roadman 102 HS is a mobile and compact sound system with headset
The Roadman 102 HS is a compact and mobile PA solution with integrated battery. This system is perfectly suitable for solo entertainers, churches, schools, business conferences or presentations where versatility is required. The Roadman comes with a CD/MP3/USB/SD Player as well as a wireless microphone unit with headset and beltpack . A second wireless microphone unit are also available in option.
Product type
Battery-powered PA speaker
Type
Set with pocket transmitter and headset microphone
Low/mid driver dimensions
10 "
Woofer Size
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
HF driver dimensions
1 "
HF Driver Size
25.4 mm
HF driver magnet
Ferrite
HF driver brand
Custom-made
Amplifier
Class D
RMS
80 W
Peak power
320 W
Frequency response
70 - 16.000 Hz
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-link set (master / slave) , Audio-link slave volume , Line Gain , Master , Power , Speech / music switch (Mic / Line 1) , Speech / music switch (Mic / Line 2) , Tape volume , Treble , Voice priority on / off , Volume Mic 1 , Volume Mic 2
Indicators
Charge/battery status , Power
Media player
Supported media
Audio-CD , CD-R , CD-R/W , SD Card , USB stick
Supported formats
Audio-CD , MP3 file , MP3-CD , WMA file , WMA-CD
Media player controls
CD ejector , Folder - , Folder + , Mode (CD / SD / USB) , mute , Next Track , Play / Pause , Power / Volume , Previous Track , Program , Repeat , Shuffle , Stop
Media player display elements
Lighted multifunctional LC display
Line inputs
3
Line input connectors
2 x RCA , Audio-link input XLR, female
Mic inputs
2
Mic inputs
6.3 mm Jack , XLR
Line outputs
3
Line output connectors
2 x RCA , Audio-link output XLR, male
Loudspeaker outputs
Speaker Out Switched , Speaker Out Unswitched
Transmission frequency range
863.100 - 864.100 MHz
Speaker output connections
6.3 mm Jack
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC , 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Cabinet material
aluminium , plastic
Cabinet construction
vented
Width
355 mm
Height
610 mm
Depth
315 mm
Weight
19 kg
Other features
additional radio receiver (LDRM102R) available optionally , Audio-link function , Stand mount 36 mm , Transport bag available optionally , Transport casters , transport handle , Trolley handle
RoadMan 102 Slave Speaker Box to loop in until 20 units (incl. 24V DC rechargeable Battery and Power supply)
Product type
Battery-powered PA speaker accessories
Type
active, Follower loudspeaker
Low/mid Woofer dimensions
10 "
Woofer dimensions (mm)
254 mm
Woofer magnet
Ferrite
Woofer brand
Custom-made
Tweeter dimensions
1 "
Tweeter dimensions (mm)
25.4 mm
Tweeter magnet
Ferrite
Tweeter brand
Custom-made
Amplifier
Class D
System Power (RMS)
80 W
Peak power
320 W
Frequency response
70 - 16.000
SPL (1W/1m)
95 dB
Max. SPL
115 dB
Protection circuits
short circuit
Controls
Audio-Link Follower Volume, Power
Indicators
Charge/battery status
Line inputs
1
Line input connectors
Audio-link input XLR, female
Line outputs
1
Line output connectors
Audio-link output XLR, male
Operating voltage
transformer
Operating voltage
200 V AC - 250 V AC, 24 V DC - 32 V DC (5A)
Rechargeable batteries
2 x 12 V / 4.5 AH
Width
355 mm
Height
610 mm
Depth
315 mm
Other features
Stand mount 36 mm, Transport bag available optionally, transport handle, Trolley handle
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. Cookie settingsACCEPT
Privacy & Cookies Policy
Πολιτική χρήσης
Αυτός ο ιστότοπος χρησιμοποιεί cookies για να βελτιώσει την εμπειρία σας ενώ περιηγείστε στον ιστότοπο. Από αυτά τα cookies, κάποια cookie κατηγοριοποιούνται ως απαραίτητα να αποθηκεύονται στο πρόγραμμα περιήγησης σας, καθώς είναι απαραίτητα για τη λειτουργία βασικών λειτουργιών του ιστότοπου. Χρησιμοποιούμε επίσης cookies τρίτων που μας βοηθούν να αναλύσουμε και να κατανοήσουμε πώς χρησιμοποιείτε αυτόν τον ιστότοπο. Αυτά τα cookies θα αποθηκευτούν στο πρόγραμμα περιήγησης σας μόνο με τη συγκατάθεσή σας. Έχετε επίσης την επιλογή να εξαιρεθείτε από αυτά τα cookies. Ωστόσο, η εξαίρεση από ορισμένα από αυτά τα cookie μπορεί να επηρεάσει την εμπειρία περιήγησης σας.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.
Quick Start Guide
Reviews
There are no reviews yet.