FBT JOLLY J8 Passive speaker 160W

254.00 incl. GR VAT

Only 4 left in stock (can be backordered)

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
274.850274.850The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W […]

 

Read more

274.850274.850The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers.
The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A.

These amplifiers have been designed \’from the ground up\’ in FBT’s R&D laboratories.
The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets.

The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing.

The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity.

Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within.

These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume.

The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ.

• NL-4 Neutrik™ Speakon input and link connectors

•Avaiable in white colour J 8W

Code: 37931 / 37908 White
Configuration: 2 way
Recommended amplifier: 160 W RMS
Long Term power: 80 W
Short term power: 320 W
Nominal impedance: 8 ohm
Frequency response: 65Hz – 20KHz -6dB
Low Frequency woofer: 8 – 1.7 coil inch
High frequency driver: 1-1 coil inch
Sensitivity (@1W/1m): 96.5 dB
Maximum SPL cont/peak: 118.5 / 121.5 dB
Dispersion: 90°x60° HxV
Crossover Frequency: 2.5 KHz
Recommended HP filter: 55Hz – 24dboct
Input connector: 2 x speakon N4 in & thru
Net Dimension (WxHxD): 255x415x245 – 10.03×16.33×9.64 mm/inch
Net Weight: 6.6 / 14.55 kg/lb
Transport Dimension (WxHxD): 330x480x320 – 12.99×18.89×12.59 mm/inch
Transport Weight: 8.1 / 17.85 kg/lb
Weight 8.00 kg

Reviews

There are no reviews yet.

Be the first to review “FBT JOLLY J8 Passive speaker 160W”

Your email address will not be published. Required fields are marked *

Quick Comparison

FBT JOLLY J8 Passive speaker 160W removeTOA F-2000W Speaker, 8" 2 Way, 180W/8 Ohm, White removeJBL AC 28/95 2-Way Speaker 750 Watts removeJBL AM 7200/95-WRX 2-Way MID/HIGH Passive Loudspeaker 450W removeJBL AM 7200/64 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF C4128: 400 W AES, 2X8", 1", TWO-WAY DUAL WOOFER SPEAKER remove
NameFBT JOLLY J8 Passive speaker 160W removeTOA F-2000W Speaker, 8" 2 Way, 180W/8 Ohm, White removeJBL AC 28/95 2-Way Speaker 750 Watts removeJBL AM 7200/95-WRX 2-Way MID/HIGH Passive Loudspeaker 450W removeJBL AM 7200/64 2-Way MID/HIGH Passive Loudspeaker 450W removeRCF C4128: 400 W AES, 2X8", 1", TWO-WAY DUAL WOOFER SPEAKER remove
Image
SKUFBT00017F-2000WAC 28/95AM 7200/95-WRXAM 7200/64C4128
Rating
Price 254.00 incl. GR VAT 188.00 incl. GR VAT 1,427.00 incl. GR VAT 4,854.00 incl. GR VAT 3,063.00 incl. GR VAT 888.14 incl. GR VAT
Stock

Only 4 left in stock (can be backordered)

In stock

Available on backorder

Available on backorder

Available on backorder

Available on backorder

AvailabilityOnly 4 left in stock (can be backordered)In stockAvailable on backorderAvailable on backorderAvailable on backorderAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content274.850274.850The new J series is a technologically advanced range of products that improves on the performance of the previous Jolly line.  The new J series is a competitive, value for money range of speakers. The range is based on the development of three new high efficiency class-D amplifiers with power specifications of 350 + 100W for the J 15A & J 12A, 200 + 50W for the J 8A and 80 + 40W for the J 5A. These amplifiers have been designed \'from the ground up\' in FBT’s R&D laboratories. The largest amplifier model that equips the J 15A and J 12A has a switch mode power supply as well as a digital signal processor with 4 pre-sets. The J 8A and J 5A amplifiers have toroidal transformer power supplies. The J 8A has a digital signal processor with 2 pre-sets, whilst the J 5A has analog signal processing. The speakers have been completely redesigned, introducing the technological developments of recent years to achieve a far superior efficiency and linearity. Following from the new J series, FBT bring you the DJ 15A, designed with today’s modern DJ in mind.  The DJ 15A has invaluable features allowing quality audio playback using our revolutionary DSP technology.  This includes 4 presets enabling the DJ to change the sound of their music to suit the environment they play within. These DSP presets will allow the DJs audience to enjoy improved sound quality and SPL, especially in bass reproduction at high volume. The DJ 15A also has another useful feature for DJs, including a two channel input mixer allowing the DJ to plug a music source and microphone direct into the speaker, giving separate control over volume for both devices.  You can also daisy chain these speaker together if required.  Ideal for many application of today’s modern DJ. • NL-4 Neutrik™ Speakon input and link connectors •Avaiable in white colour J 8W
Code: 37931 / 37908 White
Configuration: 2 way
Recommended amplifier: 160 W RMS
Long Term power: 80 W
Short term power: 320 W
Nominal impedance: 8 ohm
Frequency response: 65Hz - 20KHz -6dB
Low Frequency woofer: 8 - 1.7 coil inch
High frequency driver: 1-1 coil inch
Sensitivity (@1W/1m): 96.5 dB
Maximum SPL cont/peak: 118.5 / 121.5 dB
Dispersion: 90°x60° HxV
Crossover Frequency: 2.5 KHz
Recommended HP filter: 55Hz - 24dboct
Input connector: 2 x speakon N4 in & thru
Net Dimension (WxHxD): 255x415x245 - 10.03x16.33x9.64 mm/inch
Net Weight: 6.6 / 14.55 kg/lb
Transport Dimension (WxHxD): 330x480x320 - 12.99x18.89x12.59 mm/inch
Transport Weight: 8.1 / 17.85 kg/lb

F-2000 Series indoor speaker designed to provide high quality sound and reliable performance for restaurants, retail and audio/visual applications. Features include two-way bass-reflex design, high impact polystyrene enclosure with an 8" low frequency driver and dome tweeter. For challenging acoustic environments, users can easily reduce the high frequency dispersion of F-2000 models by simply installing an included horn adapter. White, 8 ohm.

Features:

  • Compact box speakers for music and voice paging distribution
  • Excellent sound quality
  • Octagonal horn design for smooth coverage
  • Adjustable high frequency dispersion
  • Extruded cabinet design improves low frequency performance
  • Individual protection circuit on each component
  • Paintable grille and enclosure
  • Wall/ceiling-mount bracket included
  • Optional board, cluster and pole-mount brackets
  • OmniMount-compatible (Series 20.5CA/WA)
  • Optional subwoofers, model HB-1, FB-100 or FB-120
  • Five year warranty

Specifications:

  • LF Driver: 8” cone woofer
  • HF Driver: 1” hard-dome tweeter
  • Crossover: 2.5kHz
  • Power Handling: 180W (cont. PGM), 60W (pink noise), 60W (70V transformer version)
  • Sensitivity (1W, 1m): 93dB SPL
  • Dispersion (adjustable):
    110° H x 100 ° V
    80° H x 80° V

Key Features:
- Compact enclosure
- Dual 205 mm (8 in) LF transducers
- 90° x 50° Progressive Transition™ Field
Rotatable Waveguide with a 25 mm (1 in) exit
compression driver
- Dual Neutrik NL4 connectors plus screw
terminals
- Multiple Attachment Points for Ultimate
Flexibility

Specifications:
System:
Frequency Range (-10 dB): 53 Hz - 20 kHz
Frequency Response (+/-3 dB): 65 Hz - 20 kHz
Horizontal Coverage: 90°
Vertical Coverage: 50°
Directivity Factor (Q): 8.9 (avg. 500 Hz - 16 kHz)
Directivity Index (DI): 7.5 dB (avg. 500 Hz - 16 kHz)
System Sensitivity1: 94 dB SPL/1W/1m
Rated Maximum SPL (1m)2: 120 dB
System Nominal Impedance: 8 Ohms
Long-Term System Power Rating3:
(Continuous/Program/Peak): 375 W / 750 W / 1500 W
AES Standard Power Rating4: 700 W
Crossover: 2 kHz
Transducers:
Low Frequency Driver: 2 x JBL 228J, 205 mm (8 in) SFG™ driver with 64 mm (2.5 in)
edge wound voice coil
High Frequency Driver: 1 x 2408H-1 25 mm (1 in) exit compression driver, 38 mm
(1.5 in) voice coil
High-Frequency Waveguide: PT-D95HF-1 (field rotatable)
Physical:
Enclosure: 12 mm and 15 mm exterior grade multi-ply hardwood
plywood
Suspension Attachment: 6 x M8 points; 1 top, 3 bottom, 2 rear.
4 x M8 rear for OmniMount® 60.0.
Finish: Black DuraFlex™ finish. White (-WH) available upon request.
Optional Weather Resistant Versions5: WRC & WRX available upon request
Grille: Powder coated 16 gauge perforated steel, acoustically
transparent foam backing (grille cloth backing on white units)
Input Connectors: Neutrik Speakon® NL4 (2 wired in parallel), plus CE-compliant
covered barrier strip terminals. Barrier terminals accept up to
5.2 sq mm (10 AGW) wire or max width 9 mm (.375 in) spade
lugs. NL4ʼs +1/-1 in parallel with barrier strip (+2/-2 loop
through).
Environmental Specifications: Mil-Std 810; IPx3 per IEC529. For higher environmental ratings,
use WRC or WRX.
Dimensions (H x W x D): 679.5 x 237.5 x 254.0 mm
(26.8 x 9.4 x 10.0 in)
Weight: 18.6 kg (40.9 lb)

Ειδική έκδοση του AM 7315/95 για χρήση σε
εξωτερικό περιβάλλον και ακραίες καιρικές
συνθήκες με επιπλέον αναβάθμιση 14 σημείων.
Πιστοποίηση IP56 κατά πρότυπο IEC 529.
Παράδοση κατόπιν παραγγελίας.

 

* 90° x 50° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits for a number of array configurations (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       90°x 50°, rotatable waveguide

Directivity Factor (Q)       :       11

Directivity Index (DI)       :       10.5 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.2 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL5       :       Bi-amp mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m)       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       113 dB SPL

Waveguide       :       PT-K95MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

    * 60° x 40° Coverage, rotatable for use in either vertical or horizontal orientation.

    * CMCD™ Cone Midrange Compression Driver provides low midrange distortion, increased sensitivity, extended bandwidth and improved phase coherency.

    * 2432H High-Frequency Compression Driver

    * PT™ Progressive Transition Waveguide for excellent pattern control with low distortion.

    * Bi-Amp/Passive Switchable.

    * Optional planar array frame kits (see AE Series Array Guide).


Frequency Range (-10 dB)       :       260 Hz – 20 kHz

Frequency Response (±3 dB)       :       330 Hz – 18 kHz

Coverage Pattern       :       60° x 40°, rotatable waveguide

Directivity Factor (Q)       :       20

Directivity Index (DI)       :       13 dB

Crossover Modes       :       Bi-amp/Passive switchable

Crossover Frequency       :       2.3 kHz

Transducer Power Rating (AES)       :       MF: 350 W (1400 W peak), 2 hrs
HF: 100 W (400 W peak), 2 hrs

Long-Term System Power Rating (IEC)       :       MF/HF: 200 W (800 W peak), 100 hrs

Maximum SPL       :       Bi-amp mode:
MF: 133 dB-SPL cont avg (139 dB peak)
HF: 135 dB-SPL cont avg (141 dB peak)
Passive mode:
MF/HF: 133 dB-SPL cont avg (139 dB peak)

System Sensitivity (1W @ 1m):       :       Passive mode: 108 dB SPL

Nominal Impedance       :       8 ohms

Midrange Driver       :       JBL CMCD-82H Cone Midrange Compression Driver with integral 200 mm (8 in) diameter Differential Drive® dual voice-coil internal driver

Sensitivity (1W @ 1m)
(Midrange)       :       108 dB SPL

High Frequency Driver       :       JBL 2432H, 38 mm (1.5 in) exit compression driver, 75 mm (3 in) voice coil

Sensitivity (1W @ 1m)
(High Frequency)       :       115 dB SPL

Waveguide       :       PT-K64MH

Enclosure       :       Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood

Suspension Attachment       :       13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware

Finish       :       Black DuraFlex™ finish.
White available upon request.

Grille       :       Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.

Input Connector       :       NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.

Environmental Specifications       :       Mil-Std 810; IP-x3 per IEC529.

Dimensions (H x W x D in vertical cabinet orientation)       :       548 x 561 x 657 mm
(21.6 x 22.1 x 25.9 in)

Net Weight       :       27.2 kg (60 lb)

Optional Accessories       :       M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.

The C4128 is a full range 2 way high sensitivity, dual woofer passive system, compact and versatile specially designed for under balcony applications.

It is designed to provide extended low frequency performance from a compact, vented enclosure. It features advanced technology transducers: two 8" woofers equipped with a 2" voice coil and a 1" neodymium compression driver equipped with a 1.5" voice coil. The compression driver is mounted on a rotatable 90 x 70 constant directivity horn, providing very natural sound reproduction.
The cabinet is asymmetric (15° and 45°) for versatile under balcony applications as well as ceiling/wall installation and floor monitoring operations.
The wide coverage angle and the true constant directivity of the newly designed horn make very easy the coverage of large audiences.
 

Features
High efficiency
1" neodymium compression driver with 1.5" voice coil
Asymmetrical cabinet under-balcony/wedge monitor applications
Active Mosfet Compression Driver Protection
LICC Crossover
90°x 70° CMD (Constant Matching Design) constant directivity rotatable horn
M10 mounting points

 

Applications
  • Under Balcony Applications
  • Permanent Installations
  • Main Reinforcement in small spaces
  • Portable Systems AV Presentations
  • Zone Delay and Fill Systems
  • Stage monitor in multimedia environments, auditoriums house of worship

 

Acoustical Specifications
Frequency Response -10 dB:100 Hz÷ 20 kHz
Frequency Response -3 dB:150 Hz÷ 15 kHz
Max SPL @ 1m:122 dB 
Horizontal coverage angle:90° 
Vertical coverage angle:70° 
Directivity index; Q:9.25 
System Sensitivity:96 dB 
Nominal Impedance:8 Ω 
Power Handling:400 Watt 
Peak Power Handling:1600 Watt 
Recommended Amplifier:800 
Protections:Dynamic 
Crossover frequencies:2100 Hz 
TRANSDUCERS
Compression Driver:1" HF driver , 1.5" voice coil 
Nominal Impedence:8 Ω 
Input Power Rating:25 Watt AES 
Sensitivity:109 dB 
Woofer:2 x 8" woofer, 2" voice coil 
Nominal Impedence:16 Ω 
Input Power Rating:200 Watts AES 
Sensitivity:94 dB 
INPUT SECTION
Input connector:Speakon NL4 
Output connector:Speakon NL4 
CABINET
Cabinet Material:10 mm birch plywood construction 
Hardware:3 x M10, 4 X M5, 2 X M6 inserts 
Pole Mount/Cap:Yes 
Grille:Custom perforated steel grille 
Colour:Black, white, scratch resistant paint 
PHYSICAL SPECIFICATIONS
Height:650 / 25.59 mm/inch 
Width:260 / 10.23 mm/inch 
Depth:299 / 11.77 mm/inch 
Net Weight:17.4 / 38.36 Kg/Lbs

Weight8.00 kg6.50 kg18.60 kg27.20 kg27.20 kg20.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 8.00 kg
Weight 6.50 kg
Weight 18.60 kg
Weight 27.20 kg
Weight 27.20 kg
Weight 20.00 kg