FBT X-PRO 15A Active Speaker 2-way 1000W

No matter whether you’re performing on stage, delivering a business presentation or designing the highest quality fixed installation, you want to leave an indelible mark on your audience. That’s when FBT’s new X-PRO series of powered speakers can help you make a difference.

Constructed out of plywood enclosures finished with extra-texture paint, the X-PRO series is cut to withstand tour-tough conditions with Italian elegance and style. Professional features include ergonomic handles, M10 flying points, a monitor taper design, and a full protective grille. Meanwhile the onboard Class D amplifier module delivers an amazing 1000W power with a flexible DSP to allow personal EQ adjustments, while the low frequency response can be extended courtesy of the dedicated X-SUB 18” powered subwoofer.

Designed to satisfy the most demanding applications, X-PRO is the professional’s choice.   

• 2-way bi-amplified bass reflex
• FBT Custom 380mm (15”) LF woofer with 64mm (2.5”) voice coil
• FBT 25mm (1”) throat /35mm (1.4”)voice coil HF compression driver
• 42Hz to 20KHz Frequency Response
• 80° H x 50° V constant directivity rotatable horn
• 35° or 45° monitor taper

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     15“
LF Driver Power Amp     500W Class D
HF Driver Size     1.75“
HF Driver Power Amp     500W Class D
Frequency Range     44Hz-20kHz (-10dB)
Crossover Frequency     2kHz
Maximum Peak SPL     133dB
Horizontal Coverage Angle     60 Degrees Axisymmetric
Vertical Coverage Angle     60 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     32.1“
Width     17.5“
Depth     15.2“
Weight     64 lbs.
Manufacturer Part Number     KW152

Inside our rigid custom designed cabinet is a 15" driver designed exclusively for this project. It's matched with a new 1.75" Titanium high frequency driver, aimed through a 1" diameter horn. The dB500a features 500 watts of clean power (400 watts low frequency/100 watts high frequency) and has a crossover designed for high SPL. Our exclusive Optimax(TM) signal processing circuitry provides total speaker protection but won't cut the low end at high volumes, as similar speakers with sliding filters do.

The back panel has a built-in mixer-like preamp section with mic and line inputs, XLR connectors and level controls. Controls for the selectable low pass filter and Optimax processing are also included.

The dB500a speaker cabinet features an array of mounting options. Designed with floor monitoring in mind, they are also easily stacked or permanently installed. A 1 3/8" pole receptacle is built in, and 10 reinforced fly points are available.

Quasi 3-Way Active Tri-amplified Speaker System.
SPOT2500T is composed of an active full-range cabinet and a passive bass cabinet.
It is a high directivity, long throw compact systems, characterized by extremely high intelligibility, even at long distances, making it the perfect choice for live applications. This system was designed to simplify the task of assembling clusters by simply placing multiple enclosures side-by-side when wider horizontal dispersion is required.

SPOT 2500T is equipped with class D amplifiers controlled by the Montarbo DSP loudspeaker processor (56 bit, 180 MHz, 24 bit converters) which provides filtering, equalization, delay, limiting and diagnostic functions. This DSP utilizes an advanced algorithm for the real time control of both the power output and the temperature (both internal and external) of the amplifier; it also includes a dedicated standby function which results in reduced power consumption when no signal is present.

5 presets are available, one of which may be customized by the user and loaded into the DSP, thus adapting the speaker's acoustic response to the user's personal taste. The Internal DSP controller also provides an auxiliary output that may be used to drive an external subwoofer, be it equipped with internal filters or not. The presets can be modified by means of the Montarbo proprietary software program RAConLS™ with the LD2.4 USB interface (optional device). The remote control allows: programming and storage of one preset in the DSP and the creation of an unlimited library of personalized settings in the PC; adjustment of the frequency response by means of a 10 filter 'fully parametric' equalizer; adjustment of the delay time and of the output level of each speaker system; monitoring of the power amplifier's status (temperature, protection circuits, limiters and thermal alarms); selection of the type of subwoofer used.

- 3 class-D amplifiers (with switching-mode power supplies) that can supply a total of 2500 Watts EIAJ (1000 + 1000 W for the LF drivers, 500 W for the HF).
- 140 dB max SPL.
- Two 15" woofers (one of which in the passive bass module) with 4" voice coil, featuring a shielded front-mounted neodymium magnet.
- HF driver with a 1.4" throat and a 3" voice coil, featuring a neodymium magnet and titanium diaphragm. - High directivity (50° H x 40° V) wave-guide horn.
- Montarbo 56 bit DSP, 180 MHz, 24 bit converters.
- Dedicated standby function.
- Processed auxiliary output allows to drive an external subwoofer.
- 5 presets one of which may be customized and loaded into the DSP.
- Presets remote control and customization by means of the proprietary software program RAConLS™ and the optional LD2.4 USB interface.
- With a single LD2.4 USB interface it is possible to operate up to 10 speaker systems of the SPOT, WIDE and FULL series.
- The geometry of the cabinet allows for easy construction of clusters. A 3-system cluster results in a 150° horizontal coverage.
- Birch plywood cabinet, finished with anti-abrasion paint.
- Threaded studs (M10) for safe and simple suspension; adapter for coupling bar (SM3, optional); 2 ergonomically designed handles.

APPLICATIONS
- Coverage of large areas.
- Stage-monitoring applications (in-fill system).
- In-house system in theatres and in live-performances venues.

Specification     Detail
Powered     Yes
Power Configuration     Bi-amped
LF Driver Size     15“
LF Driver Power Amp     500W Class D
HF Driver Size     6.5" (Mid), 1.75" (H)
HF Driver Power Amp     500W Class D (Shared Between Mid and HF)
Frequency Range     35Hz-20kHz (-10dB)
Crossover Frequency     500Hz, 2.1kHz
Maximum Peak SPL     134dB
Horizontal Coverage Angle     75 Degrees Axisymmetric
Vertical Coverage Angle     75 Degrees Axisymmetric
Enclosure Material     15mm Birch Plywood
Mounting Options     Pole, Fly
Inputs     1 x Combo (XLR/TRS, Mic/Line), 1 x Combo (XLR/TRS, Line), 2 x RCA
Outputs     2 x XLR (Direct), 1 x XLR (Line)
Height     43.1“
Width     18.5“
Depth     16.8“
Weight     87 lb.
Manufacturer Part Number     KW153

JBL VP7315-64DPAN Powered 15'' 3-way 1100W RMS Loudspeaker System

Key Features :
 
Powered bi-amplified full-range loudspeaker with JBL DrivePack? technology for portable or installed use.

2200 Watts peak output power, 1100 Watts continuous.

HiQnet? compatible; network control.

15-inch Differential Drive? low-frequency driver for
extended low-frequency output.

60° x 40°coverage.

Stylized and ergonomically designed powder-coated
die cast aluminum handles.

Six 3-inch fly track suspension points and fourteen M10
fittings (optional detachable flying fittings and forged eye
bolt kits available).

Optional DPCN (CobraNet?) digital audio input
module available.
 
Specifications: