FOCUSRITE REDNET X2P Audio Interface 2×2 Dante table type

663.09 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
RedNet X2P is a compact, portable and robust 2×2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable simply use a […]

 

Read more

RedNet X2P is a compact, portable and robust 2×2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable simply use a power over Ethernet switch or PoE injector. A local input mixer allows \’more me\’ monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.

Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4″ connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4″ inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite\’s acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.

Weight 1.45 kg

Reviews

There are no reviews yet.

Be the first to review “FOCUSRITE REDNET X2P Audio Interface 2×2 Dante table type”

Your email address will not be published. Required fields are marked *

Quick Comparison

FOCUSRITE REDNET X2P Audio Interface 2x2 Dante table type removeBEHRINGER UFO202 USB Audio Interface PHONO/LINE 2In/2Out removeYAMAHA GO 46 FIREWIRE AUDIO-MIDI INTERFACE removeMOTU HD192 removeEDIROL FA-101 FireWire Audio Capture removeYAMAHA AUDIOGRAM 6 USB Audio Interface remove
NameFOCUSRITE REDNET X2P Audio Interface 2x2 Dante table type removeBEHRINGER UFO202 USB Audio Interface PHONO/LINE 2In/2Out removeYAMAHA GO 46 FIREWIRE AUDIO-MIDI INTERFACE removeMOTU HD192 removeEDIROL FA-101 FireWire Audio Capture removeYAMAHA AUDIOGRAM 6 USB Audio Interface remove
Imageufo202 behringer sound card usb 2in 2out phono vinyl pickup preamplifier riaa
SKUREDNET X2PE005369GO46HD192FA101J080.00021
Rating
Price 663.09 incl. GR VAT 28.00 incl. GR VAT 286.35 incl. GR VAT1,592.83 incl. GR VAT 468.91 incl. GR VAT 120.00 incl. GR VAT
Stock

In stock

Only 2 left in stock (can be backordered)

In stock

In stock

Available on backorder

In stock

AvailabilityIn stockOnly 2 left in stock (can be backordered)In stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Transfer and Restore Your Favourite Vinyl Records
  • Free Download of Audacity Audio Editor Software
  • Completely USB Powered - Compatible with Mac and PC
  • RCA Inputs and Outputs, Plus a Headphone Monitoring Output
  • High-Resolution 48kHz Converters Ensure Pristine Audio
Content

RedNet X2P is a compact, portable and robust 2x2 Dante audio interface featuring two Red Evolution mic pres, stereo line out and a stereo headphone amplifier. RedNet X2P allows you to effortless add a high quality Dante audio interface by integrating power, audio, clock and remote control over a single Ethernet cable simply use a power over Ethernet switch or PoE injector. A local input mixer allows \'more me\' monitoring control, while a control lockout mode ensures settings can not be changed when used remotely.

Rear panel XLR outputs offer level-controlled analogue outputs of up to 24dBu, while a front panel 1/4" connector provides a high-powered headphone output capable of driving both high and low impedance headphones. A pair of combination XLR/1/4" inputs allow the connection of mic, line or instrument level signals to the mic pres, which include Focusrite\'s acclaimed Air mode which emulates the sound of our classic input transformers. The top panel features an array of controls: output level for headphone and line outputs, mic pre controls of gain, high-pass filter, Air, phase invert, phantom power and stereo linking; as well as the crossfader for controlling the balance of mic pre inputs and network receiver channels which to be sent to the headphone or line outputs.

Behringer UFO202 USB Audio Interface

The Behringer U-Phono UFO202 is a high-quality USB audio interface with built-in phono preamp and massive software package for digitalizing your tapes and vinyl records.

Features

- High-quality USB audio interface connects your turntable, cassette player, etc. with your computer for recording and playback - Transfer and restore your valuable vinyl records and tapes to your computer via a simple USB connection - Massive software bundle includes Audacity vinyl restoration, noise-reduction, editing and recording software, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins - Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms - Phono input switchable to line input source - Stereo output allows easy connection and playback of computer audio files over your home sound system - High-resolution 48 kHz converters for high-end audio quality - Stereo Headphone output with dedicated Level control lets you monitor your input source - Works with your PC or Mac computer -- no setup or drivers required - Powered via USB--no external power supply needed - High-quality components and exceptionally rugged construction ensure long life - Conceived and designed by BEHRINGER Germany

Compact and Versatile

Equipped with RCA inputs and outputs, the U-Phono UFO202 can connect to a myriad of equipment such as tape decks, sound modules and active monitors, plus many more. Additionally, when you connect the UF202's outputs to your mixer's input channels, you have the ability to access EQ, Aux Sends and much more - allowing you to create extremely versatile mixes for your recording sessions.

48kHz Precision

The Behringer UFO202 provides pristine 48kHz resolution to ensure that your favourite vinyl records are recorded with the detail and quality your music deserves.

Audacity Audio Editor Software

The Behringer U-Phono UFO202 USB Audio Interface comes supplied with a free open source audio editor and multi-track recorder software - Audacity. Please visit the Behringer web page for download links here.

Specifications

  • Input Connector: RCA, Unbalanced
  • Input Impedance: Approx. 27kΩ
  • Maximum Input Level: 2dBV
  • Output Connector: RCA, Unbalanced
  • Output Impedance: Approx. 400Ω
  • Maximum Output Level: 2dBV
  • Digital Output: Toslink, Optical
  • Digital Output Format: S/PDIF
  • USB: Type A
  • Converter: 16-Bit
  • Sample Rate: 32kHz, 44.1kHz, 48kHz
  • Frequency Response: 10Hz - 20kHz ±1dB @ 44.1kHz Sample Rate
    • 10Hz - 22kHz ±1dB @ 48kHz Sample Rate
  • Crosstalk: -77dB @ 0dBV, 1kHz
  • Power Supply: USB, 5V 100mA Maximum
  • Dimensions: 0.87" x 3.46" x 2.36" / 22mm x 88mm x 60mm (H x W x D)
  • Weight: 0.10kg

Yamaha GO46 FireWire Interface

The GO46 FireWire interface from Yamaha provides a means to stream
high-quality 24-bit/192kHz digital audio and MIDI into a computer. Connect
it to a laptop, and you've got a rugged and portable interface that can go
anywhere you go, hence the name "GO46." This box is the ideal interface
for great-sounding audio on the "GO."

Yamaha GO46 FireWire Audio/MIDI Interface At a Glance
Premium Mic Pres and Inputs
FireWire Connectivity
Flexible Connectivity Including S/PDIF, Insert Points, and MIDI

Premium Mic Pres and Inputs
The GO46 features combo mic/line terminals (for both XLR and phone jack)
 on the front panel. Phantom power is also available and independently
switchable for each input channel. In other words, you can use a condenser
microphone on channel 1 with phantom power switched on to capture the
delicate sounds of a vocal while simultaneously recording an electric/acoustic
guitar plugged into channel 2. These combo inputs are captured at up to 24-bit/
192kHz resolution. This pro-level quality makes the GO46 perfect for any type
of recording, and allows you to capture the full details and nuances of the
original source - from the breathiness of a vocal to the delicate finger slides of
an acoustic guitar performance.

FireWire Connectivity
The FireWire equipped GO46 not only offers the convenience of one plug
connection to a computer, but the GO46 can be powered via bus power
from the FireWire port. Connect the GO46 to the FireWire terminal of a
laptop and you've got and extremely powerful and portable recording studio
that will fit in a backpack. This is also great for using the GO46 in places
where electrical outlets can be scarce, like local clubs.

Flexible Connectivity Including S/PDIF, Insert Points, and MIDI
In order to maximize the flexibility of the GO46, Yamaha included virtually
any kind of connection you might need on location recording gigs. Two
insert points allow for connection to outboard gear like compressors or EQs.
MIDI in/out allows for connection of MIDI sound modules or instruments.
S/PDIF jacks are great for inputting digital signal from another interface or
throughputting the GO46 signal to a digital mixer, separate digital recorder,
or any other digital device.

Yamaha GO46 Features:
FireWire (IEEE1394)
Durable aluminum die cast body
2 x Premium Quality Mic pre amps with XLR/Combo connectors
Phantom Power ( +48V ) switch for each connector
2 x Insert connectors for analog inputs
1 MIDI In/ 1 MIDI Out
S/P DIF In/Out up to 24 bit/96 kHz
24 Bit/192 kHz compatible
Included Cubase LE, HALion SE, and Groove Agent SE

 

Equipped with the latest generation 24-bit, enhanced multi-bit 128x oversampling 192-kHz converters, the HD192 achieves a remarkable A-weighted signal-to-noise ratio of 120 dB with balanced XLR connectors throughout. Ideal for surround applications, the HD192's 12 inputs and 12 outputs can support two simultaneous 5.1 mixes. And the HD192 is full of advanced features, like AES/EBU I/O with sample rate conversion both in and out.

The PCI-424 card introduced with the 2408mk3 is 192-kHz ready. Just connect the HD192 expansion interface to record 192-kHz audio.

The HD192 can be purchased as an expander for an existing PCI-424-based MOTU Audio System, or as a core system which includes the PCI-424 card and Audiodesk workstation software.

Portable 10-in/10-out compact, mobile FireWire audio at home or on the road The FA-101 has the highest specs available to support your most demanding applications. You get 24-bit, 192kHz simultaneous recording and playback in a compact 1U half-rack unit, with all the headroom you need. Supports up to 24 bit, 192 kHz Compatible with Mac OS X standard driver Two independent, on board mic pre-amps Capable of full duplex recording and playback on 10 independent channels Bus powered and durable metal construction for mobile applications Lots of ins and outs to support a wide range of recording and gigging applications The FA-101 is a feature-packed 10x10 audio interface that can handle a full 10 channels of input/output at 24-bit/96kHz. Record and monitor all 10 channels simultaneously in full duplex. Phenomenal audio power for the studio musician! In addition, the FA-101 offers 6-channel recording and playback at 24-bit/192kHz for performance at DVD-A quality. * 10x10 24-bit/96kHz audio performance * 6x6 24-bit/192kHz audio performance * Firewire bus-powered * Direct monitoring * Low-latency driver support * Native Support in Mac OS X (10.3.4 or later) * 2x phantom-powered mic preamps * 8x8 balanced analog I/O * S/PDIF optical I/O * MIDI I/O

Computer Based Recording Packages 

Computer-Based Recording Packages For All Players Of Musical Instruments 

The AUDIOGRAM Series has been carefully designed to make setting up your computer-based recording environment an absolute breeze. Coming as a complete kit, the AUDIOGRAM6 and AUDIOGRAM3 each bundle together a hardware interface that adds audio inputs and outputs to your computer, software for recording and producing music, and a USB cable for connecting the audio interface. As such, either package will instantly turn your computer into a powerful yet intuitive tool for recording and editing audio from virtually any microphone or audio input device. What's more, setup is as easy as installing the bundled music-production application, CUBASE AI, on your computer and connecting the audio interface using the USB cable provided! You're then ready to connect instruments, microphones, CD players, MP3 players, and even old record or tape players for recording straight into CUBASE AI.

Size/Weight
Dimensions Width 170mm (6-3/4“)
Height 59mm (2-3/8“)
Depth 192mm (7-5/8“)
Weight Weight 770g (1.7 lbs.)
General Specifications
Sampling Frequency Rate USB AUDIO 1.1, 16bit/44.1kHz
Effects
Types Dynamic 1-knob Compressor (COMP) x 2
Storage and Connectivity
Connectivity Headphones Stereo Phone connector x 1
Microphone Mic/Hi-Z input x 2
LINE IN Phone connector x 4 (L/MONO x 2, R x 2)
LINE OUT Phone connector x 2 (L, R)
USB TO HOST USB (TO HOST)
Power Supply
Power Supply USB powered
System Requirements
Windows PC Windows-based computer with built-in USB interface Windows-based computer with built-in USB interface
CPU 1 GHz or better Intel Core / Pentium / Celeron processor 750 MHz or better Intel Core / Pentium / Celeron processor
Support OS Windows Vista / Windows XP Professional / XP Home Edition
Memory More than 1 GB More than 128 MB
Macintosh PC Macintosh computer with built-in USB interface
CPU Intel CPU / Macintosh G3 processor 300 MHz or better
Support OS Mac OS X 10.3.3 or higher
Memory More than 128 MB
Accessories
Included Accessories Cable USB Cable
Others CUBASE AI DVD, Owners Manual

 

Weight1.45 kg1.00 kg1.50 kg5.50 kg1.00 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.45 kg
Weight 1.00 kg
Weight 1.50 kg
Weight 5.50 kg
Weight 1.00 kg
Weight 1.50 kg