| Content |
The new PH-100 is a remarkably quiet, 1U rackmount headphone distribution amplifier.
Each output has its own amplifier as well as its own level control - so different individual
listening requirements can be met with ease. Multiple PH-100s can also be cascaded
to handle a large number of listeners making it ideal for orchestral, multimedia, education
and trade show applications. The PH-100 is especially handy in the studio environment
because an output from the mixer can send a talkback signal to the Aux input (complete
with level control) of the PH-100 and be distributed to all headphone outputs. This great
cue system makes for more effective communication between engineer/producer and
musicians.
Flexibility is further enhanced with all ten outputs being available both on the front and r
ear panels.
* Ideal for studio, orchestral, education, multimedia, conference and exhibition applications
* 10 headphone outs - each with its own amplifier
* Each input routes to its direct output, plus Aux 1 source (cue feed)
* Multiple inputs: XLR, phone, RCA pin jacks
* +4dBu or -10dBV switchable for balanced inputs
* Individual level controls with peak reading LED
* Stereo or mono input select
* Cascade inputs & outputs for ?daisy chaining? units
* Aux In with level control for cue feed from main mixer
SPECIFICATIONS:
INPUT
INPUT L, R (balanced)
Connector XLR-3-31 x 2, phone x 2
Input Level +4dBU (XLR-3-31), -10dBV (phone)
Input Impedance more than 10k ohm
INPUT L/MONO, R (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
AUX In L/MONO, R (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
CHANNEL IN 1-10 (unbalanced)
Connector RCA pin x 2
Input Level -10dBV
Input Impedance more than 10k ohm
OUTPUT
PHONES OUT 1-10
Connector Phone x 20
(10 each on front/rear, priority on front outputs)
Maximum Output Level 500mW
Impedance 8 ? 32 ohm
Frequency Response 30Hz ? 20kHz +/-1dB
Residual Noise less than -65dBV
THD less than 0.3%
CASCADE OUT L,R
Connector RCA pin x 2
Output Level -10dBV
Frequency Response 30Hz ? 20kHz +/-1dB
S/N less than -80dBV
THD less than 0.1%
PHYSICAL
Dimensions 484 (W) x 49 (H) x 267 (D)
Weight approx. 4kgs.
Power 120V / 230V
Power Consumption 18W | Palmer Monicon, and the volume is right!
With Palmer Monicon, your monitor volume is always under control. The passive mini-mixer with the oversized control is inserted between the stereo output of the notebook, PC or interface and an active monitor system and thus permits convenient and precise volume control of the monitors from the workstation. The passive circuitry with only a few components has absolutely no affect on the sound. Mute and mono buttons make it possible to mute the outputs and merge the stereo output signal into a mono master signal.
The inputs and outputs of the controller are equipped with XLR connectors and the 3.5mm stereo TRS sockets usually found on computers. Combo input sockets also permit connection with 6.3 mm TRS plugs. Thus the Palmer Monicon is compatible with both professional and consumer equipment. Genuine wood sides make the practical studio tool in its massive powder-coated sheet steel housing an elegant looking "little helper" that is a typical Palmer product.
- Type: passive
- Number of channels: 2
- Number of inputs: 2
- Input connections: XLR Combo / 3.5mm stereo jack
- Input type: balanced/unbalanced
- Maximum input level: +20 dBu
- Input impedance: 10 kohms balanced/ 5 kohms unbalanced
- Number of outputs: 2
- Output connections: XLR/m, 3.5 mm stereo jack
- Output type: balanced/unbalanced
- Max output level: +20 dBu
- Output impedance: 600 ohms
- Frequency response: 10Hz - 40 kHz +/- 1 dB
- THD: 0,001 %
- Max. attenuation: 85 dB (attenuator), 112 dB (attenuator + mute)
- Controls: Attenuation, Mute, Mono
- Housing material: sheet steel/wood
- Housing surface: powder-coated
- Width: 164 mm
- Height: 62 mm
- Depth: 85 mm
|
Overview
Sound can be perfected with Sennheiserʼs HDVA 600. Delivering authentic sound in its purest form, listeners are treated to a world of sheer listening pleasure. Years of knowledge in audio engineering and innovations in acoustic amplification, resulted in the creation of the HDVA 600. The consistently symmetrical signal processing and extremely low harmonic distortion guarantees an absolutely precise sound. Also, thanks to their pre-amp performance, they are easy to adjust and be connected directly to speakers for optimum audio amplification. In essence, the HDVA 600 provides a spectacular listening experience when paired with any Sennheiserʼs audiophile headphones.
Features
Consistently symmetrical signal processing for maximum sound quality
Symmetrical inputs and outputs simplify integration into a system
High-end ALPS quadruple potentiometer achieve perfect channel equality
Variable gain factor (five stages) for optimized use of low impedance headphones
Sophisticated metal housing to protect against signal scatter and vibration
Solid controls turned from solid metal, providing the utmost in long-term stability |
- Ultra-compact monitor headphone amplifier for studio and stage applications
- Personal \'\'more me\'\' mixer – mix a mic plus a monitor signal and hear them via headphones
- Flexible Mic In and Mic Through connectors plus Ground Lift switch
- Stereo Monitor input with dedicated Monitor Level control and Mono/Stereo switch
- High-power headphone output on 1/4\'\' and 1/8\'\' jack connectors
- DC 12 Vadapter included
- 3-Year Warranty Program*
- Designed and engineered in Germany
|
Info
Apogee Groove is the best portable USB DAC and headphone amp for listening to music on your Mac or PC. Groove takes the same high quality audio technology found in the worldʼs most prestigious recording studios and delivers it to your laptop. Connect Groove directly to your computer and connect your headphones or powered speakers directly to Groove. Itʼs that easy. Youʼll be amazed by the difference in sound quality. Highlights: USB 2.0 connection to Mac and PC Up to 24 bit / 192kHz audio ESS Sabre DAC Constant Current Drive?, Ultra-smooth frequency response for any headphones Quad Sum DAC?, 4 DACs per channel for highest dynamic range and lowest distortion Asynchronous clocking Max output level: 225mW into 30 Ohm Multi-color LEDs for status and level indication Powered by USB Top panel buttons for adjusting output level and muting Compact and portable (95mm H x 30mm W x 16mm T) Premium aluminum build quality Built in the USA Pricing to be announced
| The new HP4 from PreSonus answers the need for a headphone distribution
amplifier with professional specifications in a small package at an affordable
price. The HP4 features four discrete headphone outputs on the front panel
each with its own volume potentiometer and 150mW of amplification per channel.
The HP4 also features adjustment over control room monitors with a separate
volume control, monitor mute switch and mono switch giving you an extremely
powerful monitoring solution at an amazingly low price.
Features
? Four High Power Headphone Outputs
? Ultra loud (150mW per channel)
? Ultra quiet operation
? Musical Wide Dynamic Range
? Control Room Monitor Outputs with Level Control
? Mono or Stereo Operation
? Monitor Mute Switch
? Daisy Chain an Infinite Number of Units
? Compact package
Technical Specifications
Input
TRS Impedance 10K Ohms
Panel Controls
Headphone Level 1 to 12
Monitor / Feed Output -80dB to +10dB
Mono Switch
Monitor / Feed Mute
Power Supply
Type Linear
Input 16VAC/1000mA
Output
TRS Balanced 51 Ohms Impedance
Performance
THD+Noise (Unweighted) 0.002%
Noise Floor -98dB
Signal To Noise >95dB
Power Supply Rejection >98dB
Power 16 Watts
Physical
Weight 5lbs./ 2.3 kg.
Dimensions 5.5 x 5.5 x 1.75
Mounting Max Rack and Universal Rack Tray
Chassis Steel
Panel Brushed Aluminum
Sides Cast Aluminum |
Reviews
There are no reviews yet.