Content |
Medium-Moving-Head
* DMX-controlled operation or stand alone operation with Master/Slave-function * 48 preprogrammed scenes in Program Run for stand alone operation * Number of scenes in Program Run can be changed individually * The scenes in Program Run can be modified via the Control Board or via an external controller and loaded into the memory * 8 built-in programs can be called up via DMX-controller * Sound-controlled via built-in microphone * 8 brilliant, dichroic colours plus white * Switchable colour change (mode 1: only full colours, mode 2: colour-change at every position) * Rainbow-effect with adjustable speed in both directions * Gobo-wheel with 6 rotating gobos plus open * All gobos can be interchanged * With gobo-shake function * Exact positioning via 16 bit Pan/Tilt movement resolution * Strobe-effect with 1-10 flashes per second * Motorized focus * Mechanic dimmer * Positioning within 540° Pan and 265° Tilt * Lightbeam with 19° radiation angle and manual focus * Control-Board with 4-digit display and foil-keyboard for adjusting the DMX-starting address, Pan/Tilt-Reverse, Program, Reset, lamp on/off * For MSD/HSD 250 or MSD 250/2 lamp * DMX-control via every standard DMX-controller
SPECIFICATIONS: Power supply: 230 V AC, 50 Hz ~ Power consumption: 430 W DMX-control-channels: 11 DMX-512-connection: 3-pin XLR Flash-rate: 10 Hz Colour-wheel: 8 dichroic filters and open Rotating gobo-wheel: 6 gobos and open Outside diameter of the gobos: 27 mm Image diameter of the gobos: 23 mm Length of base: 330 mm Width of yoke: 320 mm Height (head horizontal): 485 mm Weight (net): 13 kg
| The Explorer 250 Pro is the most extended version of the HSD-250 Explorer series. It provides high performance combined in a compact and reliable fixture. The Explorer 250 Pro is the solution for all mobile and fixed installations where quality and lightoutput have top priority.
Key features:
LCD Display for all settings and controls
Frost filter
New Software:
Gobo shake function
Lamp timer
Unit timer
Display blackout mode
Power supply: 240V 50 Hz
Lamp: HSD-250/78,
HSD-250/80, MSD-250/2
Colours: One colour wheel with 7 vivid
colours and white
DMX: control board with LED display;
DMX512 console
(Remote switch on/ off
lamp via DMX512 console)
Linearity move speed adjust
Power: 500W
Dimensions (LxWxH): 400 x 400 x 476 mm
Weight: 26 kg
And much more... |
The smartMAC is a 150 W moving head profile that outperforms many of its 250 W rivals and offers unprecedented reliability, longer service intervals, total silence and smaller power bills.
* 150 W discharge lamp
* 8 interchangeable color filters plus open
* Motorized focus
* 6 indexable rotating gobos plus open
* Fadeable, strobe effect up to 9 Hz, pulse effects, instant open and blackout
* Pan and tilt range of 540°/257°
* No fan - silent operation
* Mounting points are 2 pairs of 1/4 turn locks
* Modular design for easy maintenance and servicing
|
Coemar IPROFILE FLEX Moving Head Profile Projector 2000W
Component Description lamp Philips 2000W MSR/SA code 105258 base G22 lamp life 750 hours - 50% at maximum power luminous flux from 100000 to 170000 lumen movement pan 500° - tilt 252° effects 6 rotating images, indexable and superimposable to 2 animation wheels fitted with glass effects, to create fire, water, clouds, snow and other effects gobos gobo wheel fitted with 6 gobos + open indexable. Variable direction and speed colour full proportional CMY + CTO (orange colour temperature correction) proportional, + 5 fixed colours + white on fully customisable colour wheel for the reation of 'color 3D' ? 'Best Color' ? colours dynamically determine the output of the lamp, thus allowing an optimal level of light output to be maintained. frost effect frost effect achieved by defocusing system without losing light output dimmer/shutter mechanical dimmer proportional 0-100%, with fade/pulse, black-out and chaser effect framing system four blade framing system with each shutter blade adjustable for radial position and angle. Assembly may be rotated 0 - 90 degrees. ZAP Strobe electronic strobe variable 0-100Hz, synchronised, random and pulse effect iris proportional 10% - 100% aperture optical zoom linear progressive zoom; free control of zoom and focus modularity all modules are detachable, with multi-pin electrical connection held by 1/4 turn fastener. Modular PCB system with serial interface ventilation forced ventilation temperature control 'Variabl Air Flux'? system (patented) display 4 character, 17 segment LED display, all functions emulated by DR 2 remote compatible with DR2 (information exchange with PC through USB.e connection control signal DMX 512 protocol, 34 channels. Bi-directional communication with DR 2 power requirement electronic ballast and PFC (power factor corrector), flicker-free, constant power. weight 56,7 Kg., 125 Lbs. item code 9124/1 in single case 9124/2 2 units in double case | LED Moving Head with 7 x 10W RGBW 4-in-1 LED's HeadBanger 10 - Output: 6.100 Lux @ 1m - Lens: 25¡ - DMX-512 protocol w/ 7 or 12-channel control modes: dimmer, strobe (0-10Hz), pan (540¡ max), tilt (270¡ max), pan fine, tilt fine, red, green, blue, white, colour macros, sound active - User selectable modes: DMX, auto, master/slave, sound (via integral microphone w/ adjustable sensitivity) - Control panel: 4-digit LED display + 4 push-buttons, for easy programming - DMX input & output: 3-pin XLR connectors - Metal housing w/ hanging bracket (truss- or other clamp not included) - Low noise Delta Electronics cooling fan - Power consumption: 80W (max) - For indoor use only - Dim.(LxWxH): 27*26*23cm /10.63*10.24*9.05 in - Net weight: 2.75kg/ 6 lbs |
The Cameo AURO® SPOT 300 is an RDM-capable ultra bright moving head with 16-bit resolution, 630° pan and 235° tilt movement and high speed 3-phase motors. It is powered by a single 180 watt LED and sports 8 intense colors plus white and split colors. A rotating 3-facet prism, 8 fixed and 6 replaceable rotating gobos provide a wide variety of awesome animated effects.
The AURO® SPOT 300 features 5-channel, 15-channel, 24-channel DMX control modes, automated programs and sound activation as well as master, slave and standalone capabilities. Functions include a choice of 4 smooth dimming curves, gobo shake and a high-speed 0 - 20 Hz cycle strobe.
The heavy-duty housing integrates a temperature controlled low noise fan, 3-pin and 5-pin DMX plus Neutrik powerCON inputs and outputs. A battery-powered 6-button display enables convenient offline configuration. The all-professional multi-voltage AURO® SPOT 300 operates on 100 - 240 V AC.
- RDM enabled moving head
- Luminous flux 4900 lm
- High speed 3-phase motors
- 16-bit resolution
- Motor focus
- Automated positioning correction
- Battery powered display for offline configuration
- 8 intense colors, white and split colors
- 2 gobo wheels + open
- 6 rotating and 8 fixed gobos
- Rotating gobos replaceable with metal or glas gobos
- Rotating 3-facet prism
- Smooth dimming from 100 - 0% with 4 selectable curves
- 0 - 20 Hz strobe
Product type
LED Moving Lights
Colour spectrum
8-channel multi colour , Split colours , white
Colour temperature
9300 K
DMX input
XLR 3-pin male , XLR 5-pin male
DMX output
XLR 3-pin female , XLR 5-pin female
DMX mode
15-channel , 24-channel , 5-channel
DMX Functions
auto programs , Dimmer , Dimmer Curve , Gobo Shake , Gobo Wheel , PAN , TILT
High Speed Strobe
1 - 20 Hz
Standalone modes
Auto run , Show , sound control
Controls
Enter , mode , Value Down , Value Up
Indicators
colour LC display
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power connector
Neutrik PowerCon
Housing material
metal , plastic
Cooling
temperature-controlled fan
Illuminance
10250lx @ 5m , 28500lx @ 3m
|
Reviews
There are no reviews yet.