| Content |
The bi-amplified Genelec 4040A is a powerful but compact two way active loudspeaker designed for fixed installations.
As an active loudspeaker, it contains drivers, power amplifiers, active crossover filters and protection circuitry. This integrated design makes installations easier and more efficient as separate power amplifiers are not needed.
The MDETM (Minimum Diffraction EnclosureTM) loudspeaker enclosure is made of die-cast aluminium and shaped to reduce edge diffraction.
Combined with the advanced Directivity Control WaveguideTM (DCWTM), this design provides excellent frequency balance in difficult acoustic environments.
The 4040A is equipped with practical tone controls for calibrating the loudspeakers according to their environment.
Automatic protection circuits for amplifiers and loudspeaker drivers combined with the rugged metal enclosure ensure reliability for years to come.
The versatile mounting features include integrated rear support points for wall and floor stands plus a further M10 thread for mounting on the enclosure base.
| 109 dB | | 55 Hz - 20 kHz (± 3 dB)
55 Hz - 20 kHz (-3 dB) | | 2.5 kHz | | Bass 6.5" + Treble ¾“
metal dome + DCWTM | | Bass 120 W + Treble 120 W | | H x W x D 350 x 237 x 223 mm | | 9.9 Kg (22 lb) | | 1 x balanced Phoenix connector |
| The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 6,5" Installation Monitor Active:
- Model Name: LDSAT62AG2
- Type: Bass Reflex
- Components:
- Woofer: 6,5" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B
- Dispersion: 60° x 60°
- Power (RMS): 50 W
- Frequency Range: 55 Hz - 20 kHz
- SPL (1 W / 1 m): 89 dB
- Max SPL: 108 dB
- Protection: Over-current
- Controls: Volume, Switchable Auto / Power Mode
- Indicators: Power
- Connectors:
- Input: Line: XLR + Jack 6,3 mm Combo
- Output: Line: XLR
- Cabinet Material: 12 mm MDF
- Cabinet Surface: Painting
- Dimensions (W x H x D): 200 x 410 x 243 mm
- Additional features: M6 rigging / mounting points, mounting brackets
|
The very compact 4030B is a powerful bi-amplified speaker system ideal for small to mid-sized commercial installations such as clubs, bars, board rooms, museums, theaters, etc.
Our Intelligent Signal Sensing (ISS) feature, reduces power consumption to less than 0.5 watts by automatically switching the active monitor to standby, when no audio signal has been detected for some time. When it receives an audio signal again, the loudspeaker turns back on.
ISS is fully compliant with the latest EU requirements and the ErP 2013 Directive for electronic devices.
The MDETM (Minimum Diffraction EnclosureTM) enclosure has rounded edges and a gently curved front and sides to achieve a very smooth frequency response and superb imaging qualities with minimized cabinet edge diffraction.
The 4030B also features the advanced Genelec Directivity Control WaveguideTM (DCWTM), a revolutionary flow-optimized reflex port design, optimized die-cast aluminium structure with extremely durable semi-matt finish and acoustically optimized metal grilles.
| 100 dB | | 58 Hz - 20 kHz (± 2.5 dB)
55 Hz - 20 kHz (-3 dB) | | 3.0 kHz | | Bass 5" + Treble 3/4“
metal dome + DCWTM | | Bass 40 W + Treble 40 W | | H x W x D 285 x 189 x 178 mm | | 5.5 Kg (12.1 lb) | | 1 x balanced Phoenix connector |
|
Specification Detail
Powered Yes
Power Configuration Bi-amped
LF Driver Size 12“
LF Driver Power Amp 500W Class D
HF Driver Size 1.75“
HF Driver Power Amp 100W Class D
Frequency Range 55Hz-20kHz (-10dB)
Crossover Frequency 1.5kHz
Maximum Peak SPL 124dB
Horizontal Coverage Angle 90 Degrees
Vertical Coverage Angle 50 Degrees
Enclosure Material 15mm Birch Plywood
Mounting Options Pole, Fly, Wedge
Inputs 1 x XLR
Outputs 1 x XLR
Height 24“
Width 15.2“
Depth 15“
Weight 50 lbs.
| | The LD Systems SAT62AG2 is the active version of the SAT62G2. The compact 2-way speaker is not only suitable for installation, but also as a home studio monitor and for other sound reinforcement tasks.
The bass-reflex design is loaded with a 6.5" custom woofer and a 1" silk dome tweeter with wave guide, which are driven by a Class AB power amplifier with 50 W continuous power and overcurrent protection. The input is a XLR-jack combo socket, an XLR socket permits looping through of the signal. Reproduction is balanced and dynamic throughout the frequency range of 55 Hz - 20 kHz and attains a maximum sound-level pressure of 108 dB. The SAT62AG2 features a switchable power saving mode that automatically switches to standby if there is no signal for 3 minutes.
The 12 mm MDF cabinet with a durable textured coating is available in black and white and equipped with M6 rigging points. An included mounting bracket offers additional possibilities for mounting; a universal joint mount is available as an accessory.
Specifications 6,5" Installation Monitor Active:
- Model Name: LDSAT62AG2W
- Type: Bass Reflex
- Components:
- Woofer: 6,5" Custom Made
- Compression Driver: 1" Custom Made
- Amplification: Class A / B
- Dispersion: 60° x 60°
- Power (RMS): 50 W
- Frequency Range: 55 Hz - 20 kHz
- SPL (1 W / 1 m): 89 dB
- Max SPL: 108 dB
- Protection: Over-current
- Controls: Volume, Switchable Auto / Power Mode
- Indicators: Power
- Connectors:
- Input: Line: XLR + Jack 6,3 mm Combo
- Output: Line: XLR
- Cabinet Material: 12 mm MDF
- Cabinet Surface: Painting
- Dimensions (W x H x D): 200 x 410 x 243 mm
- Additional features: M6 rigging / mounting points, mounting brackets
|
Reviews
There are no reviews yet.