Content |
GENELEC ACTIVE LOUDSPEAKERS
Since its founding in 1978, the Finnish company Genelec has been known for its range of active monitor loudspeakers, featuring matched electronic-crossovers and individual amplifiers for each driver. Found in broadcast, recording and mastering studios worldwide, Genelec offer a range of monitors for all applications. The most popular types are detailed here, all other models are available to special order. Full brochures available on request.
Active Monitors 8020A
A bi-amplified, two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This, the smallest speaker in the Genelec range features features magnetic shielding, aluminium cabinet, active crossover and 2 x 20W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8020A units in total, with the lead control affecting level of the whole chain. Front-panel mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets or the supplied keyhole wall-mount adapter and a three eighths of an inch thread on the base for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8020Aʼs.
8030A
A two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This features magnetic shielding, aluminium cabinet, active crossover and 2 x 40W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8030A units in total, with the lead control affecting level of the whole chain. Front-panel mains switch, mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets and a three eighths of an inch thread for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8030Aʼs.
8040A
A bi-amplified two-way system for main and surround monitoring in small control rooms, OB vehicles and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, 2 x 90W amplifiers with overload protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 30.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8040Aʼs.
8050A
A bi-amplified two-way system for main and surround monitoring in medium-sized control rooms and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, two amplifiers with overload and thermal protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 60.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one 8050A.
Technical Specification:
| 8020A | 8030A | 8040A | 8050A |
---|
Lower cut-off | | | | | frequency: | 65Hz | 55Hz | 45Hz | 35Hz | Upper cut-off | | | | | frequency: | 21kHz | 21kHz | 21kHz | 21kHz | Max SPL @1m: | 105dB | 108dB | 115dB | 120dB | Amplifier power: | 20W/20W | 40W/40W | 90W/90W | 150W/120W | Input impedance: | 10k ohms | 10k ohms | 10k ohms | 10k ohms | Level for 100dB | | | | | SPL @1m: | mute to -6dBu | mute to -6dBu | -6 to +6dB | -6 to +6dB | Mains voltage (±10%): | 230V | 230V | 230V | 230V | | Power consumption: | | | | |
---|
idle: | 5VA | 10VA | 10VA | 10VA | full power: | 50VA | 80VA | 110VA | 170VA | Dimensions (w): | 151mm | 189mm | 237mm | 286mm | (h): | 230mm | 285mm | 350mm | 433mm | (h inc. IsoPod): | 242mm | 299mm | 365mm | 452mm | (d): | 142mm | 178mm | 223mm | 278mm | Weight: | 3.7kg | 5.7kg | 8.6kg | 12.7kg | Ordering note
Although the same floor stand applies to all 8000 series models of Genelec speakers, each model uses a unique stand plate to allow connection to the stand. Please ensure the correct stand plate is ordered for your model of 8020A, 8030A, 8040A or 8050A speaker.
|
PRICE PER UNIT
S3X-V
Using the newly developed 4” HexaCone midrange and 9” HexaCone woofer combined together with the X-ART tweeter creates the unique S3X-V control monitor.
A step up over the smaller models, the S3X-V is capable of producing more power and volume along with a more detailed and homogeneous sound that will impress even the most experienced sound engineer. Whether the complex sonic images of an orchestra or the smooth tone of a jazz trio, the S3X-V reveals even the finest nuances of any material. The driver assembly of the S3X-V allows long time, non-fatiguing listening sessions.
Reviews: "Wonderfully detailed...”
“Wonderfully detailed, with an exceptionally transparent mid-range. [...] ADAM make the leap to a three-way speaker design that seems to pay dividends in clarity and separation. [...] I think it would be fair to say theyʽre the best sounding ADAM monitors Iʽve reviewed.” (Sound On Sound, 12/2009)
“No doubt, the S3X-V deserve the title Reference Monitor. With this series, ADAM Audio proves to have a very good feeling for meeting the specific demands of the sound engineerʽs guild, creating studio standards at the same time. [...] A precision tool combined with a luxury good.” (www.96kHz.de, 03/2010)
Woofer |
| Number | 1 | Basket Ø | 9" (228 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Midrange |
| Number | 1 | Basket Ø | 4.5" (116 mm) | Voice coil Ø | 1" (25 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Midrange | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 32 Hz - 50 kHz | THD > 80 Hz | ≤0.6 % | Long term output | ≥114 dB | Max. peak | ≥124 dB | Crossover frequencies | 350 / 2800 Hz | Input impedance | 10 KOhm | Weight | 34 lb (15,4 kg) | Magnetically shielded | Optional | Height x Width x Depth | 19" (485 mm) x 11" (281 mm) x 11.5" (295 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
PRICE PER UNIT A revolutionary formula: 2 x 7 = 77 In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line. The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring. Driver technology Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels. The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image. Amplifiers / controls Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch. The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies. To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors. Review samples: “… a refreshing change“ "… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012 “… wide and spacious soundstage with solid left/right imaging“ "… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012 Subwoofer | | Number | 1 / 1 | Basket Ø | 7" (175 mm) / 7" (175 mm) | Voice coil Ø | 1.5" (38 mm) / 1.5" (38 mm) | Cone material | Carbon / rohacell / glass / Carbon / rohacell / glass | Tweeter | | Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers | | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Subwoofer | 1 | Type | PWM | Amp. power RMS / music | 100 W / 150 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 75 W | Control panel | | Input Sensitivity | -∞ to +14 dB | High Shelf EQ > 5 kHz | ±6 dB | Low Shelf EQ | ±6 dB | Tweeter gain | ±4 dB | Input connectors | | Analog | XLR / RCA | Location | Rear | General data | | Panel | Front | Frequency response | 38 Hz - 50 kHz | THD 90dB/1m > 100 Hz | ≤0.5 % | Long term output | ≥114 dB | Max. peak | ≥122 dB | Crossover frequencies | 400 / 3000 Hz | Input impedance | 30 KOhm | Weight | 28.2 lb (12,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 9.5" (235 mm) x 21" (530 mm) x 11" (280 mm) | Warranty | 5 Years |
| Behringer MS-16 2x8W 2-Way Active Personal Monitor System
The Behringer MS16 Studio Monitors feature an active 2-way design with powerful 4'' woofers and 1.5'' tweeters, powered by two 8 watt amplifiers. Offering two line inputs and a microphone input, the Behringer MS16 monitors are perfect for both home studios and general multimedia applications.
Full Description
Compact and Ideal For Home Studio
The Behringer MS16 Studio Monitors, Pair are the ideal studio monitor for your home studio project. Whether that be mixing, producing, or even listening the MS16 Studio Monitors turn your computer into a personal home studio. Its powerful 4" woofers provide thumping bass, whilst the high resolution tweeters provide clean high frequencies. Also featured are dedicated volume, bass and treble controls for extra flexibility. They also make excellent add-on speakers for electronic keyboards and playing a live performance.
Input Connections
The MS16 Studio Monitors feature multiple input options featuring a 1/8" stereo input for connecting up CD, MD and MP3 players. The dual RCA jacks allow for stereo keyboard modules and tape decks. Furthermore there is a 1/4" inch to allow connections for a dynamic microphone or electric guitar enabling you to sign or play along with prerecorded tracks.
Features
- Compact stereo speaker system ideally suited for home studios, multimedia applications, keyboard and vocal monitoring, etc.
- Powerful 4'' woofers and high-resolution tweeters powered by two 8 watt amplifiers
- Dedicated Volume, Bass and Treble controls for more flexibility
- Stereo RCA inputs for sound cards, keyboards, etc. that can be used simultaneously with a second stereo source (e. g. CD/MD player) through 1/8'' TRS stereo input
- Separately adjustable 1/4'' TRS microphone input mixable with stereo inputs for playback and vocal monitoring applications
- 1/8'' TRS headphone connector with auto-mute loudspeaker function
- Magnetically shielded for placement near computer monitors
- Designed and engineered in Germany
Specifications
- Woofer: 4''
- Tweeter: 1.5''
- Output Power: 2 x 8 Watts
- Frequency Response: 80Hz - 20kHz
- Speaker Impedance: 4?
- Input 1:
- Connector: 1/8'' TRS Stereo
- Input Level: -10dBm, 10k?
- Input 2:
- Connector: RCA Stereo
- Input Level: -10dBm, 10k?
- Mic Input:
- Connector: 1/4'' TRS
- Input Level: -50dBm, 50?
- Dimensions: 9.5'' x 5.5'' x 6'' / 241mm x 140mm x 150mm (H x W x D)
- Weight: 4kg
|
Features
Ruler-Flat Response 52Hz to 20kHz, + 1.5 dB
Benefit: Sound true to actual recording
Benefit: Any pair of speakers is a matched pair
Active Technology
2 FR (Fast Recovery) Series Amplifiers; HF 40W; LF 100W
Benefit: Precise dividing slope, correct phase, and low distortion
Benefit: Minimal chance of speaker damage due to overdriving
Servo Loop Woofer Technology
Electronic control and dampening
Benefit: Speaker output is as true to incoming signal as possible
Frequency Response Controls
80Hz low-cut switch; 3-position live/dead switch (-2bdB, Normal and +2dB)
Benefit: Excellent response in a variety of acoustic environments
Wide Sweet Spot
Custom-designed die-cast wave guide
Benefit: User hears the same thing across a wider range of motion
3-Position Acoustic Space Switch
Compensation in bass response for half-space (-2dB) and quarter-space (-4dB) placement
Benefit: As close-to-flat performance as possible regardless of placement in room
Applications
Professional Recording Studios
Home and Project Studios
Film (THX) and Post Production Studios
Home Theater Installations
Acoustic Performance
Free Field Frequency Response: 52Hz - 20Hz
|
PRICE PER UNIT
S2X
The S2X brings together the virtues of the ʽclassicalʼ 7” woofer and tweeter combination by using ADAM innovative technologies and top-class materials.
The HexaCone 7” woofer is driven by a sophisticated magnet system with a 2” voice coil creating a greater linear excursion. This produces more dynamics than one would assume in a monitor of such small proportions. As a result, in addition to the unsurpassed audio quality of the X-ART and A/B amplifier combination, this monitor surprises the listener with a very powerful, deep, but always tight and precise low end.
Review at a glance: "Sonic sensation“
“The ADAM Audio S2X can convince in all areas, concerning the sound as well as the workmanship, and are worth every Euro. […] a no-compromise tool for all who mean serious business, whether in music or postproductions.” (www.96kHz.de, 03/2010)
“We started off with a classical string quartet recording and let´s just say right away that the S2Xs floored us. Several adjectives spring to mind [...] - wide open, transparent, effortless, breathtaking realistic, loud, dynamic, involving... [...] If you close your eyes and continue listening, the S2Xs seem to ‚disappearʽ almost entirely. [...] you gradually become less aware that you´re listening to speakers because they´re like an open window on the music itself. [...] Result: These monitors are up there with the best we´ve tried so far.” (MusicTech, 01/2010)
Woofer |
| Number | 1 | Basket Ø | 7.5" (186 mm) | Voice coil Ø | 2" (50 mm) | Cone material | HexaCone | Tweeter |
| Number | 1 | Type | X-ART | Diaphragm area | 4 inch² (2420 mm²) | Equiv. Diaphragm Ø | 2" (56 mm) | Velocity transform ratio | 4:1 | Diaphragm weight | 0.17 g | Built-in Amplifiers |
| Woofer | 1 | Type | PWM | Amp. power RMS / music | 250 W / 350 W | Tweeter | 1 | Type | A/B | Amp. power RMS / music | 50 W / 100 W | Control panel |
| Input Sensitivity (coarse) | -20 to +8 dB (4 dB steps) | Input Sensitivity (fine) | -1.5 to +2 dB (0.5 dB steps) | EQ 80 Hz | 0 to +6 dB (1 dB steps) | High Shelf EQ > 6 kHz | ±4 dB (1 dB steps) | Low Shelf EQ | ±4 dB (1 dB steps) | Tweeter gain | ±2 dB (0.5 dB steps) | Input connectors |
| Analog | XLR | Digital (optional) | AES/EBU / SPDIF / word clock | General data |
| Panel | Front | Frequency response | 35 Hz - 50 kHz | THD > 80 Hz | ≤0.8 % | Long term output | ≥110 dB | Max. peak | ≥120 dB | Crossover frequencies | 2200 Hz | Input impedance | 10 KOhm | Weight | 23.8 lb (10,8 kg) | Magnetically shielded | Optional | Height x Width x Depth | 14.5" (370 mm) x 8.5" (220 mm) x 12.5" (320 mm) | Warranty | 5 Years | Delivery contents |
Power cord, Manual
|
|
Reviews
There are no reviews yet.