GENELEC 8030AW COMPACT 2WAY ACTIVE NEARFIELD MONITOR

GENELEC ACTIVE LOUDSPEAKERS

Since its founding in 1978, the Finnish company Genelec has been known for its range of active monitor loudspeakers, featuring matched electronic-crossovers and individual amplifiers for each driver. Found in broadcast, recording and mastering studios worldwide, Genelec offer a range of monitors for all applications. The most popular types are detailed here, all other models are available to special order. Full brochures available on request.

A bi-amplified, two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This, the smallest speaker in the Genelec range features features magnetic shielding, aluminium cabinet, active crossover and 2 x 20W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8020A units in total, with the lead control affecting level of the whole chain. Front-panel mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets or the supplied keyhole wall-mount adapter and a three eighths of an inch thread on the base for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8020Aʼs.

A two-way speaker suitable for a variety of applications where high-quality sound is needed in a compact space, from near-field and project studio monitoring to surround-sound, high-end installations and multimedia systems. This features magnetic shielding, aluminium cabinet, active crossover and 2 x 40W amplifiers. The amplifier section features switches for treble tilt, bass roll-off and bass tilt, and has a male XLR input and a female XLR output. It can also be used to feed a subwoofer (7050B recommended) or a further chain of up to 6 x 8030A units in total, with the lead control affecting level of the whole chain. Front-panel mains switch, mains indicator LED and volume control are neatly styled, with rear IEC power input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 20.5 brackets and a three eighths of an inch thread for microphone-stand mounting. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8030Aʼs.

A bi-amplified two-way system for main and surround monitoring in small control rooms, OB vehicles and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, 2 x 90W amplifiers with overload protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 30.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one pair of 8040Aʼs.

A bi-amplified two-way system for main and surround monitoring in medium-sized control rooms and mastering suites. The hard-wearing, aluminium cabinet houses an active crossover, two amplifiers with overload and thermal protection, a metal-dome HF driver and polymer bass-driver, both magnetically shielded, and front-panel mains indicator LED. The crossover includes adjustable sensitivity and calibrated "tilt” switches for bass and treble adjustment. XLR balanced input and IEC mains input. The speaker has three methods of mounting: 3 mounting points on the back of the monitor for attaching the supplied IsoPod desktop stand, which allows vertical and horizontal positioning and can be fixed to the optional floor stand using the optional stand plate, threaded holes on the back for Omnimount size 60.0 brackets and a M10 x 10mm thread for securing the unit to the base. Accessories available are a floor stand (speaker vertical or horizontal using IsoPod), stand plate (necessary for use with floor stand) and soft carrying bag for one 8050A.

Although the same floor stand applies to all 8000 series models of Genelec speakers, each model uses a unique stand plate to allow connection to the stand. Please ensure the correct stand plate is ordered for your model of 8020A, 8030A, 8040A or 8050A speaker.

PRICE PER UNIT

A revolutionary formula: 2 x 7 = 77

In some set-ups it can be advisable to use a horizontally designed speaker rather than a vertical one. Until now, such monitors were only available within the SX top line.

The brand new A77X, due to its outstanding features, might become a true game changer: Equipped with the same advanced technologies as the A7X, it therefore is very similar to the two-way speaker. The A77X, however, distinguishes itself by much higher, compression-free maximum sound pressure levels and dynamics. Due to its power and radiation characteristics, it also is perfectly suited for both near- and midfield monitoring.

Driver technology

Like all models of the AX series, the A77X features the ADAM proprietary X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has higher efficiency and higher maximum sound pressure levels.

The two 7” woofers are identical with that of the A7X. With their large voice coils (1.5”) and powerful amplifiers, they are capable of both very high maximum sound pressure levels as well as very deep registers. The woofers do not cover the same frequency bands: while both of them are responsible for the (sub-) bass frequencies up to about 400Hz, only one of them reproduces the midrange. This prevents interferences between the two drivers. For stereo setups the A77X is available in A and B versions in order to guarantee a precise stereo image.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the bass-/midwoofers are driven by a 100W PWM amp each. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

The rear panel features several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.

Review samples:

“… a refreshing change“
"… if you liked the A7X youʼll like the A77X even more, and if the companyʼs smaller near-fields werenʼt your cup of tea, the A77X are definitely worth another listen. They are not much bigger than a two-driver cabinet design, so should slip into any installation where a near-field speaker will fit, but the extra low/ mid frequency drivers mean that the bass is more naturally extended and the mid-range clearer and more detailed. I like the A77X a lot and they make a refreshing change from the usual mid-priced near-field speakers." AUDIO MEDIA magazine / February 2012

“… wide and spacious soundstage with solid left/right imaging“
"… they are fun and easy to work with, covering all the essential functions required of high-end monitors with aplomb." MusicTech magazine / April 2012

PRICE PER UNIT

The most powerful AX monitor

With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields.

The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill.

Cabinet- and bass reflex-construction

Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil.

Amplification and controls

With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series.

On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application.

Review: A8X: a "powerful link" between near- and midfield monitors!

"The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010)

MYTHO 6 is a two-way reference studio monitor that features a high quality large metal dome tweeter for the best vocal reproduction and a 6” neodymium vented woofer with a large sized 51 mm voice coil that guarantees very high energy for tight and controlled bass reproduction and perfect thermal stability with minimum power compression.

The magnetic circuit features a special air ventilation to reduce air compression, air noises and minimize distortion in large excursion situations. The MYTHO 6 is equipped with two separate amplifiers: 200 W for the low frequencies and 100 W for the high. The design is a classic AB circuit, unparalleled for low distortion and natural sound. The signal processing is executed from a dedicated high quality DSP processing. It features a solid aluminium cabinet internally braced and reinforced to improve low frequencies behaviour and reduce resonances.

PRICE PER UNIT

ADAMs A7 & A7X: the evolution of a legend

The predecessor to the A7X, the A7, became the most famous of all ADAM monitors in a very short time. Not only has it been reviewed over three dozen times with outstanding results, it has also received numerous awards. The A7 quickly gained mass appeal, praised in many of the worldʼs largest internet forums. Still today, the A7 are the reference monitors in many smaller studios.

With the A7X, ADAM Audio proudly presents the evolution of a legend. It takes everything that made the A7 such an outstanding speaker to a new level.

Driver technology

The first aspect that distinguishes the old from the new model is the X-ART tweeter. The ʽXʼ stands for ʽeXtended frequency responseʼ and thus for one of the features of the Accelerating Ribbon Technology that has been drastically improved: the frequency response. It now extends all the way up to 50kHz. In addition, the X-ART tweeter has a higher efficiency and higher maximum sound pressure levels.

The perfect integration with the lower frequencies has been achieved with a newly designed 7” midwoofer. It has been redesigned with a much bigger voice coil (1.5”) and is driven by an amplifier with twice the power compared to its predecessor. This combination produces an amazing sound and pressure levels with an almost distortion-free musical reproduction.

Amplifiers / controls

Each driver has its own dedicated amplifier. A 50W A/B amp is responsible for the X-ART tweeter, while the midwoofer is being driven by a 100W PWM amp. The front panel includes a power switch and a control for the volume that retains the volume setting independently from the on/off switch.

On the rear panel are several additional controls: a gain for the high frequencies (± 4dB) and two shelf filters for high and low frequencies.
To ensure greater compatibility, there are both XLR (balanced) and RCA (unbalanced) connectors.