| Content | Especially on tour it is important that all instruments, equipment and accessories are compactly packed and can be easily stowed away in the bus. That\'s why the Gravity Rapid Desk Set combines the stable Gravity KSX2 keyboard stand with a double X-form and the Gravity Rapid Desk 1. That makes it easy for you to put up a sturdy table in a few simple steps and also to take it down into two separated flat pieces. Plus, this combination works in pretty much every situation, no matter if you\'re playing in the studio or practicing in the rehearsal room.
Measuring 100 cm wide and 48 cm deep, its large table surface provides you with plenty of room to arrange your laptop, DJ mixer, controller or even a small rack synthesizer just the way you like. The stand and tabletop can hold up to 60 kg in weight, whereas the vents in the powder-coated steel support plate ensure your equipment is kept perfectly cool.
In terms of set-up, all you have to do is slide the upper bars of the keyboard stand into the slots located on the bottom middle of the support plate and then open the X-stand. There\'s absolutely no need to fasten or screw tight the support plate.
- Set with KS X2 keyboard stand and KS RD1 rapid desk
- Extremely rugged steel structure for a high load-bearing capacity and stability
- Quick and easy set-up
- Ideal for DJ controllers, DJ mixers, laptops and rack synthesizers
- Air vents for optimum ventilation of instruments
Product type
Stands and Tripods
Type
Keyboard stands
Weight
11,359 kg
Type
Keyboard stands
Material
Steel
Weight
6,62 kg
Surface
Powder coated
Color
Black
Max. support depth
480 mm
Max height
43 mm
Width
1000 mm
Depth
465 mm
Max load (support)
60 kg
Suitable for tube diameter
25 - 35 mm
GKSX2 - Gravity KSX 2 Keyboard Stand X-Form, Double
Weight
4,45 kg
Decks
1
Max. support depth
400 mm
Min height
100 mm
Max height
900 mm
Max load (support)
65 kg
Interchangeable rings
1 x 15 mm , 4 x 20 mm , 4 x 30 mm
Black ring pack included
Yes | This stable, very compact X-keyboard stand made from black powder-coated steel is conveniently adjustable in 5 increments from 64 to 98 cm in height. The broad surfaces provide a good grip of the instrument with ridged rubber rings.
The SKS04 is offered in packs of 8 individually wrapped units including an attractive POS packing box.
- Product Type: keyboard stand
- Material: steel
- Surface: powder-coated
- Colour: black
- Number of Supports: 1
- Max. Support Depth: 400 mm
- Min. Height: 640 mm
- Max. Height: 980 mm
- Max. Load: 30 kg
- Additional Information: 5 levels of height adjustment, compact dimensions
|
SPL 152 Single brace double tier keyboard stand Available in anthracite grey.
|
When you buy a Quik Lok stand, you just donʼt buy any "X” stand, you invest in aexpandable systemthat can be configured in a variety of ways to fit any keyboard playersʼ needs.
A new, strong, non-slip, lightweight aluminum alloy locking collar *(Patented Design) called theGrip Lok 30™is used to anchor the accessories to the main stand.
QLX/1 is a fully adjustableSecond Tier add-onfor 'X' stand with 30mm steel tubing. Contemporaneously QLX/4 Mic boom or QLX/5 music holder can be added.
Technical Specifications
| Tier depth: | 40 cm (15.7') | | Attaching collar: | Grip-Lok / 30 | | Weight capacity*: | 33.8 kg (75 lb) | | Weight: | 3.0 kg (6.6lb) | | Color: | Black | | Package: | 1 | | Master carton: | 10 | | * Note: |
as part of total weight capacity of stand to be used on
Type: Adjustable
|
|
Single Keyboard Stand with Double Brace
-
Leg depth 19.87' -50.3cm
-
Tier depth 14' - 35.7cm
-
Folded height 38.6' - 98cm
-
Brace tube size 20mm X 15mm(X2)
-
Tier tube size 28mm
-
Weight capacity 180lb - 81kg
-
Weight 8.4lb - 3.8kg
-
Color Black
|
When you buy a Quik Lok stand, you just donʼt buy any "X” stand, you invest in aexpandable systemthat can be configured in a variety of ways to fit any keyboard playersʼ needs.
A new, strong, non-slip, lightweight aluminum alloy locking collar *(Patented Design) called theGrip Lok 30™is used to anchor the accessories to the main stand.
QLX/3 is a fully adjustableSecond Tier add-onfor 'X' stand with 30mm steel tubing. QLX/4 Mic boom or QLX/5 music holder can be added.
Technical Specifications| Tier depth: | 36 cm (14.3') | | Attaching collar: | Grip-Lok / 30 | | Weight capacity*: | 33.8 kg (75 lb) | | Weight: | 2.5 kg (5.5lb) | | Color: | Black | | Package: | 1 | | Master carton: | 10 | | * Note: |
qs part of total weight capacity of stand to be used on
|
|
Reviews
There are no reviews yet.