Gravity SP 3102 TM Flexible studio monitor stand with table clamp

65.67 incl. GR VAT

Available on backorder

EAN: 4049521655524
Installments calculation
CompareAdd to wishlist Submit Better Price
  • Infinitely variable height adjustment
  • Tilt angle up to +/- 15°
  • 360° rotatable
  • EVA padded bearing surface
  • Anti-tip for the speaker
  • Infinitely variable height adjustment
  • Tilt angle up to +/- 15°
  • 360° rotatable
  • EVA padded bearing surface
  • Anti-tip for the speaker

 

Read more

Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there’s not enough space available.

Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate.

Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM’s clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren’t that deep, as well as the perfect speaker placement to find the sweet spot in the room.

Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There’s also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!

 

Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
250 mm
Max height
350 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
100X70 mm
Max. load
25 kg
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
Weight
2,7 kg
Weight 4.00 kg

Reviews

There are no reviews yet.

Be the first to review “Gravity SP 3102 TM Flexible studio monitor stand with table clamp”

Your email address will not be published. Required fields are marked *

Quick Comparison

Gravity SP 3102 TM Flexible studio monitor stand with table clamp removeSTAGG SMOS-05 Studio Monitor Stands (short) (Set) removeNowsonic Shock Stop S 10004918 Insulation Pad for Speakers (1 pair) removeNowsonic 10004933 Top Monitor Stand Studio 90 Heavy-duty 60 kg removeNowsonic 10004932 Heavy-Duty Top Monitor Studio Stand 150 60kg removeFLUID AUDIO DS 5 Table Stand for 4"or5" Studio Monitors (Pair) remove
NameGravity SP 3102 TM Flexible studio monitor stand with table clamp removeSTAGG SMOS-05 Studio Monitor Stands (short) (Set) removeNowsonic Shock Stop S 10004918 Insulation Pad for Speakers (1 pair) removeNowsonic 10004933 Top Monitor Stand Studio 90 Heavy-duty 60 kg removeNowsonic 10004932 Heavy-Duty Top Monitor Studio Stand 150 60kg removeFLUID AUDIO DS 5 Table Stand for 4"or5" Studio Monitors (Pair) remove
ImageGSP3102TM_gravity_artsound_stand_monitor_with_clamp_black_faceNowsonic Shock Stop S 10004918nowsonic top stand studio 90 10004933nowsonic top stand studio 105
SKUGSP3102TMH18ST00000100049181000493310004932DS-5
Rating
Price 65.67 incl. GR VAT 48.50 incl. GR VAT 13.64 incl. GR VAT 210.80 incl. GR VAT 235.59 incl. GR VAT70.06 incl. GR VAT
Stock

Available on backorder

Only 1 left in stock (can be backordered)

In stock (can be backordered)

Only 2 left in stock

Only 2 left in stock

Available on backorder

AvailabilityAvailable on backorderOnly 1 left in stock (can be backordered)In stock (can be backordered)Only 2 left in stockOnly 2 left in stockAvailable on backorder
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
  • Infinitely variable height adjustment
  • Tilt angle up to +/- 15°
  • 360° rotatable
  • EVA padded bearing surface
  • Anti-tip for the speaker
Content
Mastering and mixing professionals usually listen to music in ideal conditions in control rooms specifically designed for mastering and mixing. Studio monitors are either built into the wall or installed on expensive stands positioned just far enough away from studio furniture so that nobody can accidentally bump into them. In day-to-day life, however, most musicians, producers, podcasters, etc., put their monitors right on the table. Not because this is the best solution, but because there's not enough space available. Even if you invest in a good table stand in this case, you still have to live with the fact that people might walk by or carelessly move the entire structure and destroy your optimum listening set-up. Regular stands for studio monitors also need a lot of room on the table due to their lower base plate. Gravity® has tackled all these problems with the SP 3102 TM. The studio monitor stand features a table clamp to securely and safely attach the structure to tables with tabletops no thicker than 100 mm. Just like other Gravity® products, it can be tightened using a sturdy and handy knob. In contrast to conventional table stands which require a large base plate to not budge, SP 3102 TM's clamp base is only 10 × 7 cm and does not take up more space than a standard screen holder. The design of the studio monitors stands ensures that they do not stick too far out off the table. This ensures a greater distance between the listener and monitors even when tables aren't that deep, as well as the perfect speaker placement to find the sweet spot in the room. Everything stays put with the SP 3102 TM thanks to its clamp that keeps stands fixed in position. In addition, the SP 3102 TM is fully equipped to help you perfectly align the monitors into the listening position. The stand has clearly visible markings to adjust the height, rotation, and tilt. There's also EVA padding and an anti-tipping device to make sure your valuable monitors rest securely on the upper shelf, even when tilted up to 15°. You can now sit back and enjoy the sweet spot!
 
Product type
Stands and Tripods
Type
Speaker Stands
Tubing material
Steel
Tubing colour
Black
Tubing surface
Powder-coated
Min height
250 mm
Max height
350 mm
Tilt angle
+/- 15 °
Bearing surface
240 x 250 mm , EVA padded
Height adjustment
Adjusting screw
Base material
Steel
Base edge length
100X70 mm
Max. load
25 kg
Interchangeable rings
1 x 15 mm , 2 x 30 mm
Black ring pack included
Yes
Weight
2,7 kg
  • Height: 30 - 40 - 50 cm (11.8 - 15.5 - 19.7“), 3 steps, with safety pin
  • Maximum load: 25 kg (55.1 lb)
  • Material: Steel (pole and plate) and nylon (joint)
  • Top plate: Square, sturdy
  • Top plate dimensions: 23 x 23 cm (9 x 9“)
  • Bottom plate dimensions: 24 x 24 cm (9.4 x 9.4“)
  • Quantity: 2 stands
  • Weight: 2.75 kg (6 lb) per stand
Features
  • Absorber panels made of high-density-foam
  • Optimizes the acoustic performance of your speakers
  • 3 different inclination angles
  • Suitable for near-field monitors
Specifications
  • Color: anthracite
  • Size: S
  • Dimensions: 176 x 200 mm
  • Weight: 250 g
Scope of delivery
  • 2 x Shock Stop S
Applications
  • Damping of vibrations and resonances of studio and hi-fi loudspeakers
  • Correction of the inclination of studio and hi-fi loudspeakers
  • Height adjustment of studio and hi-fi loudspeakers
Features
  • Sturdy construction for use with extremely heavy studio monitors
  • Adjustable spikes to compensate for uneven floors
Specifications
  • Material: steel
  • Color: black
  • Height: 90 cm
  • Maximum load capacity: 60 kg
  • Pole diameter: 100 mm * (2.0 mm material thickness)
  • Support plate: 500 x 350 mm (6.0 mm material thickness)
  • Base plate: 600 x 450 mm (6.0 mm material thickness)
  • Weight: 27 kg?
Scope of delivery
  • Top Stand Studio 90
Applications
  • Speaker stand in recording or project studio
  • Speaker stand in band rehearsal room
  • Speaker stand for installation and in conference rooms
Features
  • Sturdy construction for use with extremely heavy studio monitors
  • Adjustable spikes to compensate for uneven floors
Specifications
  • Material: steel
  • Color: black
  • Height: 105 cm
  • Maximum load capacity: 60 kg
  • Pole diameter: 100 mm * (2.0 mm material thickness)
  • Support plate: 500 x 350 mm (6.0 mm material thickness)
  • Base plate: 600 x 450 mm (6.0 mm material thickness)
  • Weight: 29 kg?
Scope of delivery
  • Top Stand Studio 105
Applications
  • Speaker stand in recording or project studio
  • Speaker stand in band rehearsal room
  • Speaker stand for installation and in conference rooms
The Fluid Audio DS5 desktop monitor stands are designed for use with all 4” and 5” 2-way studio monitors. They come with the ability to elevate your monitors to two heights: 2.5” and 5”. With the included rubber feet, the stands become an acoustic isolation system that can adjust to 3 angles: Flat, 3 and 6 degrees of tilt. Elevating your monitors closer to ear-level means you get better on-axis response. As the high frequencies coming from tweeters can be somewhat directional (or "beamy”), getting them up and closer to ear level means you hear a more full-frequency response. Made from MDF wood (the same material as your monitor enclosures) they are rugged and acoustically well damped. The stand "posts” are made with polypropylene, minimizing the "ringing” sound of ABS plastic. Both top and bottom of the stands are capped off with extremely absorbent, 40 durometer rubber feet. The result of the stand construction allows your monitors to "breathe” and to produce much purer tones and a less distorted midrange. Package Contents
  • 4 x 2.5” stand "posts”
  • 4 x 5” stand "posts”
  • 4 x middle stabilizers
  • 10 rubber feet (10mm)
  • 5 rubber feet (18mm)
  • 10 screws (for mounting posts)
Features
  • Fits all 4” and 5” studio monitors
  • Allows for 2 height adjustments: 2.5” and 5”
  • Allows for 3 angle adjustments: Flat, 3 deg and 6 deg
Specifications/Material
  • Middle stabilizers: Vinyl-laminated MDF
  • Stands: Polypropylene plastic
  • Rubber: Highly absorbent, 40 Durometer
  • Size (packed): 5.94 x 7.44 x 4.5”
  • Max load 10kg per unit
  • Weight: 0.9kgs/giftbox
Measures
  • Total depth: 185mm
  • Distance between front and rear rubber support: 127mm
  • Total width: 142mm
  • Distance between left and right rubber support: 117mm
Weight4.00 kg5.00 kg0.45 kg28 kg30 kg1.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 4.00 kg
Weight 5.00 kg
Weight 0.45 kg
Weight 28 kg
Weight 30 kg
Weight 1.50 kg