Content | Professional monitoring made easy
Looking for a stage monitor engineered to satisfy professional demands for performance
and sound without requiring additional power amps, crossovers and cables? Want a
versatile enclosure suitable for use as a side-fill, front-fill or a FOH system for (almost)
unplugged gigs? Then welcome to D.A.R.T. D.A.R.T packs a high-quality preamp, controller,
active crossover, two power amps, a 12" speaker and a 1" CD horn in a compact, low-profile
monitor housing. With HK AUDIO OFR? technology on board, these enclosures project
extraordinarily rich, transparent sound, even at very high levels.
And their remarkably linear frequency response enables high volumes with reduced feedback
sensitivity. Though D.A.R.T has been optimised for use as a stage monitor, its multi-functional
housing shape and the integrated DuoTilt? pole-mount cup allow it to be used for additional
applications. With all this and a full-featured input stage (to including a microphone input for
the mayor?s address), D.A.R.T is a high-end sound-reinforcement ?Swiss Army knife? for
literally every occasion.
Facts & Features:
The right solution for every musician who wants hassle-free professional monitoring
Two-way active circuitry featuring OFR? technology
250 watts RMS digital power amp for the 12" speaker
Power amp with 60 watts RMS for the 1" HFdriver
Multi-band limiting for key frequency ranges
Two-band EQ included
Balanced, separately adjustable microphone and line inputs and additional RCA input
HK AUDIO DuoTilt? for directing sonic energy towards the audience when used on a stand
TECHNICAL DATA:
Frequency response 80 Hz - 19 kHz +/- 3 dB
Axial sensitivity 1W/1m* 105 dB
Maximum SPL @ 1m* 123 dB @ 10% THD
Bass power amp 1x 250 W RMS
Mid/high power amp 1x 60 W RMS
Active protection circuitry Multi-band -limiter
Low/mid driver 1x 12" HK Audio Custom
HF horn/driver 1"
Directivity 60° x 40° CD horn
Crossover frequency 2 kHz; 24 dB per octave, passive
HF protection (passive) Dynamic protection circuitry
Speaker stand mounting collar DuoTilt?, 36 mm
Connectors 1x XLR Mic In
Weight 19.8 kg / 43.6 lbs.
Dimensions (WxHxD): 56.1 cm x 40.5 cm x 34 cm
Dimensions (WxHxD): 22" x 15 7/8" x 13 3/8" | The self-powered KD12 is an uncompromising monitor and fullrange speaker - all-in-one. The KD12 delivers advanced sonic clarity and top performance. Whether as stage monitor, fullrange speaker, frontfill for larger stages or as delay speaker: The KD12 is the ideal allround solution for the up-market user.
Features
► High-class performance in ultra-lightweight design (14 kg only)
► 1.000 W Class D bi-amped power module
► Extensive DSP featuring with delay function (up to 100 m)
► IDSE© intelligent digital sound editor (on-board optimization)
► Single-encoder EASY CONTROL DSP interface
► DBL© dual-band limiters for independently stable performance
► User presets (5 user preset memories)
► Graphic backlit screen (with locking function)
► Two combo inputs (XLR/6.3 jack with MIC/LINE switches)
► Two high-resolution microphone pre-amplifiers (in MIC mode)
► Rugged, texture-painted plywood enclosure
► Sophisticated 12" coaxial transducer
► 90° x 90° beam angle (for advanced sound distribution) |
12” active coaxial monitor
350W class D+ 65W class AB
FR: 60Hz-20kHz
Max SPL: 121dB
Input level: LINE -6dBu
12” coaxial woofer with 1” driver
Protection: Thermal/Convection fan/Overload/limiter/compression
The INVoTONE DSX series is a brand new cabinet line in the premium segment. The speakers are characterized by their accurate and balanced sound. Even very high sound pressure levels are reached. The speakers are comparable in every respect with high-priced branded products, just not in the price! In addition to the acoustic and technical qualities, this series is also mechanically equipped with all the professional features that are common in this segment. "- Monitor and Coaxial 12" subwoofers up to 2x15 "2-way floorstanding speaker and a 18" subwoofer Currently, our product range includes compact 12 arrived.
Power
| 350Watt RMS Biamp | Frequency range (-10dB) | 60Hz-20kHz | Maximum SPL @ 1m | 121dB | Radiation (HxV) | 70 ° x 70 ° | Components | 12 "woofer, 1" HT-driver coaxial system | Connectors | INPUT jack combo / OUTPUT XLR male balanced link. | Input Level | Line -6dBu | Control switches | Volume Control, Ground Lift, monitor / FOH preset switchable ON / OFF | Protection circuits | temperature controlled fan, limiter, compressor | Housing | MDF with durable black textured lacquer, metal front grille, rubber feet, wooden handles, Hochständeflansch | Dimensions | (HxWxD) 313mm x 393mm x 513mm | Weight | 14KG |
|
- 1000w RMS, 2000w peak, power delivers clarity, punch and more than enough headroom for any
- performance or practice space
- Specially-voiced 12-inch woofer and high frequency compression driver deliver your drum sounds
- with precise, full response across the entire frequency range without any artificial colouration
- (2) XLR/TRS 1/4-inch combo inputs with independent volume controls and clip indicator
- XLR output to link another Strike Amp 12 or send your performance to another input device
- Lightweight and flexible tilt-back cabinet design that can also be pole-mounted
- Contour EQ switch to control your sound
- Ground-Lift switch eliminates unwanted noise
Specifications:
- Output: Power 2000W (peak, 1300LF + 700HF), 1000W (continuous RMS, 650LF + 350HF)
- Low-Frequency: 12.0” (305mm) low-frequency driver, 3.0” (76mm) high-temperature voice coil
- High-Frequency: 1.4” (35mm) voice coil, neodymium-magnet high-frequency driver with precision waveguide
- Crossover Frequency: 2.0KHz
- Maximum SPL: 131dB (peak), 128dB (continuous) (dB-SPL @ 1m)
- Frequency Response: 53Hz – 20kHz (+3dB)
- Frequency Range: 46Hz – 22kHz (-10dB)
- Horn Coverage 90o horizontal x 60o vertical (nominal)
- Equalisation: Contour switch with low- and high-frequency +3dB boost
Connectors: - (2) XLR/TRS 1/4” (6.35mm) combo inputs - (1) XLR link output - (1) IEC power cable input
- Controls Power switch, (2) volume control knobs (1 per input), EQ contour switch, ground-lift switch
- Indicators: (2) power LEDs (1 front-panel, 1 rear-panel), clip limiter LED
- Protection: Electronic clip, thermal & transducer overdrive
- Input Voltage: 100V~, 110–120V~, 220–240V~; 50/60Hz (switchable)
- Fuse: 100–120V T10AL AC250V 220–240V T5AL AC250V
- Consumption: 800W
- Enclosure: Trapezoidal, injection-molded polypropylene enclosure with perforated steel grille
Dimensions: (width x depth x height) 605 x 354 x 350mm Weight: 16.3kg |
The NX M12-A is a compact, lightweight two-way multipurpose loudspeaker system designed to deliver maximum performance for its weight and size as both a stage monitor and a front of house main PA.
It is equipped with a new 750 Watt Digipro digital amplifier and premium transducers components.
The low frequency section is a 12” woofer with a 1.75” voice coil diaphragm while the high section is a neodymium compression driver mounted to a constant directivity horn.
Features |
---|
750 Watt Digipro digital amplifier | 130 dB max spl | 90 x 40, Wide dispersion constant directivity angle, rotatable horn | 12" woofer, high power neodymium 3" voice coil | 1" HF driver, titanium dome, neodymium 1.75" voice coil | PFC power factor correction |
Acoustical Specifications |
---|
Frequency Response -3 dB: | 50 Hz | ÷ 20 kHz | Max SPL: | 130 dB | | Horizontal coverage angle: | 90° | | Vertical coverage angle: | 40° | | Compression Driver: | 1" neo, 1.75" v.c. | | Woofer: | 12" neo, 3" v.c. | |
INPUT/OUTPUT SECTION |
---|
Input signal: | ba l/ unbal | | Input connectors: | Combo xlr-jack | | Output connectors: | xlr | | Input sensitivity: | -2 dBu / +4 dBu | |
PROCESSOR SECTION |
---|
Crossover frequencies: | 1700 Hz | | Protections: | Thermal, rms | | Limiter: | Soft peak limiter | | Controls: | Volume, side / floor, contour | |
AMPLIFIER SPECIFICATIONS |
---|
Total power: | 750 Watts | | High frequencies: | 250 Watts | | Low frequencies: | 500 Watts | | Cooling: | Convection / forced | | Connections: | Powercon in / out | |
CABINET |
---|
Cabinet Material: | Balitc birch | | Hardware: | 6 x fly tracks | | Handles: | 2 side | | Pole Mount/Cap: | Yes | | Colour: | Black | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 646 / 25.43 mm/inch | | Width: | 385 / 15.15 mm/inch | | Depth: | 375 / 14.76 mm/inch | | Net Weight: | 21.2 / 46.73 Kg/Lbs |
|
The HD 12-A offers an extremely linear response and a precise, deep low frequency control. The 12” woofer guarantee a superior sound projection indoor and outdoor. It is the ideal speaker for main front of house in small PA systems, for high power monitoring and it is the best solution where higher power is required for various applications in larger venues.
APPLICATIONS
- • Live Sound
- • Rental
- • Portable PA
- • Stage Monitoring
- • Clubs
General Specs
1200 WATT PEAK, 600 WATT RMS Digital Bi-amp DSP Sound Processing RCF Precision Transducers 130 dB MAX SPL
Acoustical Specs
Frequency Response -3 dB:45 Hz ÷ 20000 Hz Max SPL:130 dB Horizontal coverage angle:90° Vertical coverage angle:60° Compression Driver:1“, 1.7" voice coil Woofer:12“, 2.5" voice coil
Inputs/Outputs
Input signal:bal/unbal Input connectors:Jack-XLR male Output connectors:XLR female Input sensitivity:-2 dBu / + 4 dBu
Processor Section
Crossover frequencies:1600 Hz Protections:thermal, RMS Limiter:Fast limiter Controls:Volume, EQ shape, Mic/line
Amplifier Specifications
Total power:1200 W PEAK High frequencies:300 W PEAK Low frequencies:900 W PEAK Total power:600 W RMS High frequencies:150 W RMS Low frequencies:450 W RMS Connections:VDE AC socket
Cabinet Specs
Cabinet Material:Composite PP Hardware:1 x M10 top, 1 x M10 bottom, 3 x M6 bottom Handles:1 top, 2 side Pole Mount/Cap:Yes Grille:Steel Colour:Black
Size/Weight
Height:647/25.47 mm/inch Width:380/14.96 mm/inch Depth:380/14.96 mm/inch Net Weight:18.3/40.34 kg/lbs |
Reviews
There are no reviews yet.