Content |
HK Audio IL 112 Sub Installation Line
An extremely compact, direct-loaded subwoofer, the IL 112 Sub delivers natural-sounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82 and IL 8.1 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | Details | | The IL 112 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1 and IL 82 in the bass range. It is equipped with a direct loaded 12“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 112 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with extremely compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 10 m depending on sound pressure requirements. A controller is not required for operating the IL 112 Sub. It is however, possible to use the Digital Field Controller (DFC).
| | | Special features | | Housing Principle: Bass Reflex
| | | Power handling capacity | | RMS: | | 150 W | Program: | | 250 W | Peak (10 ms): | | 500 W | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 16-1/2" x 16-1/2“
54 cm x 42 cm x 42 cm
| | | Weight | | 50.6 lbs
23 kg | | | Service articles | | 12“-speaker E994091 |
|
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
Features |
---|
Compact, arrayable, 2 x 12" bandpass subwoofer system | 131 dB max SPL, 800 Watt AES | Equipped with RCF high power 2 x12“, 3" voice coil woofers | Extensive internal bracing, 8 x M10 mounting points | Recessed handles | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | Epoxy powder coated front grille | Dedicated to permanent installation |
Acoustical Specifications |
---|
Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | Max SPL @ 1m: | 131 dB | | System Sensitivity: | 97 dB | | Nominal Impedance: | 4 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1600 | |
TRANSDUCERS |
---|
Woofer: | 2 X 12" woofer, 3" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 400 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | 2 x Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Hardware: | 8 x m10 mounting points, 2 x recessed | | Handles: | 2 seitlich | | Grille: | Custom perforated steel grille | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 500 / 19.68 mm/inch | | Width: | 650 / 25.59 mm/inch | | Depth: | 580 / 22.83 mm/inch | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
- 1600 W (peak), 129 dB peak SPL utilizing high sensitivity transducer designed and engineered by EV for maximum punch.
- High-output EVS-12L woofer designed to exacting specifications for superior durability and exceptional low-frequency reproduction.
- System reliability verified with over 500 hours of abuse testing and endurance testing.
- Ideal for portable and installed applications. Lightweight, compact 15 mm wood enclosure with internal bracing with durable polyurea top-coat finish.
- Professional-grade hardware: integrated M20 threaded pole mount plate and two-handle design for easy lifting.
The ELX series is designed to deliver an unprecedented combination of sound quality, portability and durability at its price point. All-new custom components—tested to levels far exceeding the industry norm—make ELX200 a robust workhorse capable of handling real-world abuse and professional applications beyond the capability of competitors’ products in its category.
Every aspect of ELX200 is designed for ideal results as part of the whole - the acoustical, electrical and mechanical components all work together seamlessly. The subwoofers pack powerful low-frequency output into a surprisingly compact footprint, and feature tuned 15 mm thick wood enclosures with a premium top-coat finish. The proprietary features that have made the other members of the EV portable speaker family a go-to for best-in-class performance are also present.
EV\'s industry-leading quality and testing procedures yield efficient transducer design and meaningful specs, resulting in components that deliver accurate, linear response at the system’s highest output levels. Translation: loud and clear all the way up to the limit. Unified in one of the strongest full-range composite enclosures ever built by EV. The ELX200 is established as the new benchmark for toughness - both acoustically and physically; maximum efficiency with maximum toughness.
Weight Net 20.2kg (44.53 lbs) |
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01“)
|
Reviews
There are no reviews yet.