| Content |
HK Audio IL 112 Sub Installation Line
An extremely compact, direct-loaded subwoofer, the IL 112 Sub delivers natural-sounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82 and IL 8.1 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | | Details | | The IL 112 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1 and IL 82 in the bass range. It is equipped with a direct loaded 12“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 112 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with extremely compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 10 m depending on sound pressure requirements. A controller is not required for operating the IL 112 Sub. It is however, possible to use the Digital Field Controller (DFC).
| | | | Special features | | Housing Principle: Bass Reflex
| | | | Power handling capacity | | | RMS: | | 150 W | | Program: | | 250 W | | Peak (10 ms): | | 500 W | | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 16-1/2" x 16-1/2“
54 cm x 42 cm x 42 cm
| | | | Weight | | 50.6 lbs
23 kg | | | | Service articles | | 12“-speaker E994091 |
| The S4012 high-efficiency band pass subwoofer is the ideal bass frequency extension to complement the RCFACUSTICA Compact series two-way loudspeakers for small size installations and distributed music systems.
The low-frequency transducer is an RCF Precision high-power 12” woofer with a 3” inside/outside voice coil to minimize power compression and extend the life of the product.
This new woofer design guarantees a fast and controlled reproduction of the bass frequency range. Using bandpass loading to the transducer, the subwoofer design ensures an efficient acoustic response down to 45 Hz.
The cabinet features two Neutrik Speakon™ connectors in a recessed input plate.
APPLICATIONS
- • Low Frequency Enhancement
- • Music Enhancement
- • Special Effects Reinforcement
- • Entertainment Systems
- • Live Music Reinforcement
- • Small Club Sound Systems
- • Infill Sub Bass Enhancement
General Specs
- 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
- Horn reflex loaded woofer
- 124 dB maximum sound pressure level
- Response down to 45 Hz
- Rectangular box enclosure with protective metal grille
- Baltic Birch cabinet with black, heavy duty, textured epoxy paint
- 35 mm standard pole mount in top section of cabinet
- Integrated hand carry points
Acoustical Specs
- Frequency Response -10 dB:45Hz ÷ 200 Hz
- Max SPL @ 1m:124dB
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:400W
- Peak Power Handling:1600W
- Recommended Amplifier:800W
Cabinet Specs
- Cabinet Material:15 mm birch plywood construction
- Handles:2 on side
- Pole Mount/Cap:Yes
- Grille:Custom perforated steel grille
- Colour:Black, scratch resistant paint
Size/Weight
- Height:360 / 14.17 mm/inch
- Width:500 / 19.69 mm/inch
- Depth:400 / 15.75 mm/inch
- Net Weight:20 / 44 kg/lbs
|
The black Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
| LF Driver |
1 x 12" / 305 mm |
| Input |
Spring-loaded speaker terminals |
| Output |
Spring-loaded speaker terminals |
| Frequency Response |
40 to 140 Hz (-10 dB) |
| Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
| Maximum SPL |
127 dB calculated, 133 dB peak |
| Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
| Low Impedance |
Yes |
| Nominal Impedance |
8 Ohms |
| Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
| Weight |
39.2 lb / 17.8 kg |
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs | MQ 90S is a compact band-pass 8” subwoofer.
It can be connected through a removable Euroblock plug that allows the parallel connection of other loudspeakers.
The cabinet material is MDF with a scratch resistant surface.
The subwoofer has internally a transformer for constant voltage lines (100 or 70 V).
The power selection is made by means of its selector.
It is for indoor use only (avoid to use it in very humid places).
It should be put on the floor of a room where "satellite” loudspeakers (for mid / high frequencies) are already present. MQ 90S belongs to RCF Monitor Q series.
| Acoustical Specifications |
| Type Of Speaker: |
“band-pass" subwoofer |
|
| Frequency Response: |
70 Hz |
÷ 220 kHz |
| Max SPL @ 1m: |
107 dB |
|
| Power Handling: |
60 Watt RMS |
|
| Peak Power Handling: |
120 Watt PEAK |
|
| System Sensitivity: |
89 dB |
|
| Impedance: |
16 Ω |
|
| Crossover frequencies: |
200 Hz |
|
| INPUT SECTION |
| Input connector: |
Removable 4 pole Euroblock |
|
| Constant voltage: |
100 V, 70 V V |
|
| Power Selection: |
60 - 30 - 15 - 7.5 W (100 V) |
|
| CABINET |
| Hardware: |
Material PVC |
|
| Colour: |
White / Black |
|
| PHYSICAL SPECIFICATIONS |
| Height: |
300 / 11.81 |
|
| Width: |
203 / 7.99 |
|
| Depth: |
400 / 15.74 |
|
| Net Weight: |
8.06 / 17.76 |
|
| SHIPPING INFORMATION |
| Package height: |
370 / 14.56 |
|
| Package width: |
265 / 10.43 |
|
| Package depth: |
470 / 18.50 |
|
| Shipping Weight: |
9.24 / 20.59 |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01")
|
Reviews
There are no reviews yet.