| Content |
HK Audio IL 112 Sub Installation Line
An extremely compact, direct-loaded subwoofer, the IL 112 Sub delivers natural-sounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82 and IL 8.1 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | | Details | | The IL 112 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1 and IL 82 in the bass range. It is equipped with a direct loaded 12“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 112 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with extremely compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 10 m depending on sound pressure requirements. A controller is not required for operating the IL 112 Sub. It is however, possible to use the Digital Field Controller (DFC).
| | | | Special features | | Housing Principle: Bass Reflex
| | | | Power handling capacity | | | RMS: | | 150 W | | Program: | | 250 W | | Peak (10 ms): | | 500 W | | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 16-1/2" x 16-1/2“
54 cm x 42 cm x 42 cm
| | | | Weight | | 50.6 lbs
23 kg | | | | Service articles | | 12“-speaker E994091 |
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
| The S4012 high-efficiency band pass subwoofer is the ideal bass frequency extension to complement the RCFACUSTICA Compact series two-way loudspeakers for small size installations and distributed music systems.
The low-frequency transducer is an RCF Precision high-power 12” woofer with a 3” inside/outside voice coil to minimize power compression and extend the life of the product.
This new woofer design guarantees a fast and controlled reproduction of the bass frequency range. Using bandpass loading to the transducer, the subwoofer design ensures an efficient acoustic response down to 45 Hz.
The cabinet features two Neutrik Speakon™ connectors in a recessed input plate.
APPLICATIONS
- • Low Frequency Enhancement
- • Music Enhancement
- • Special Effects Reinforcement
- • Entertainment Systems
- • Live Music Reinforcement
- • Small Club Sound Systems
- • Infill Sub Bass Enhancement
General Specs
- 12" high-efficiency RCF Precision 3" voice-coil woofer with Inside/Outside Coil Technology
- Horn reflex loaded woofer
- 124 dB maximum sound pressure level
- Response down to 45 Hz
- Rectangular box enclosure with protective metal grille
- Baltic Birch cabinet with black, heavy duty, textured epoxy paint
- 35 mm standard pole mount in top section of cabinet
- Integrated hand carry points
Acoustical Specs
- Frequency Response -10 dB:45Hz ÷ 200 Hz
- Max SPL @ 1m:124dB
- System Sensitivity:92dB
- Nominal Impedance:8Ω
- Power Handling:400W
- Peak Power Handling:1600W
- Recommended Amplifier:800W
Cabinet Specs
- Cabinet Material:15 mm birch plywood construction
- Handles:2 on side
- Pole Mount/Cap:Yes
- Grille:Custom perforated steel grille
- Colour:Black, scratch resistant paint
Size/Weight
- Height:360 / 14.17 mm/inch
- Width:500 / 19.69 mm/inch
- Depth:400 / 15.75 mm/inch
- Net Weight:20 / 44 kg/lbs
|
The TX1181 is the perfect companion sub to the TX1122 and TX1152 for compact and portable performance. Using the proven EVS18S woofer, the TX1181 effortlessly provides the low-frequency energy needed to keep up with Tour X boxes, as well as many other EV loudspeaker products. The integrated, low-pass input filter allows for single amp drive, and the high-sensitivity and excellent power handling don\'t require a large, expensive amplifier to generate high SPL.
The TX1181\'s unique Backbone grille not only looks great, but also provides greater strength and damage resistance than simple grille block designs. Proprietary, ergonomically correct handles and angled input panels, and integrated, screw-in-style pole-mount make the TX1181 easy to transport and employ in a variety of applications.
Specifications
| Frequency Response (-3dB) |
50 - 160 Hz |
| Frequency Response (-10dB) |
45 - 700 Hz |
| Recommended High-Pass Frequency |
30 Hz |
| Sensitivity 1W/1m |
100 dB |
| Max. SPL / 1m (calc) |
132 dB |
| System Power Handling (continuous/program/peak) |
500/1000/2000 Watts |
| LF Transducer |
EVS18S |
| Nominal Impedance (Passive) |
8 Ohms |
| Minimum Impedance |
7.5 Ohms |
| Enclosure Material |
Plywood and MDF with EVCOAT |
| Color |
Black |
| Flying |
No |
| Input Connections |
Parallel Neutrik® NL4 |
| Internal Crossover |
Yes |
| Speaker Type |
Subs |
| Weight Net |
33.8 kg ( 74.52 lbs ) |
| Dimensions (HxWxD) |
769 x 439 x 591 mm
(30.28" x 17.28" x 23.27“) |
|
EVID 12.1 EVID Series Premium Surface Mount Subwoofer
To augment and extend the low frequency response of any full-range models,
an attractive and powerful subwoofer completes the EVID line. The 12.1 provides
an easy installation by incorporating dual voice coils to handle both channels of
a stereo pair. In addition, the unit can power up to four satellites with its four
crossed-over audio outputs on the back panel. For extended bass performance
in demanding installations... EVID 12.1 Subwoofer.
Specifications
Max. SPL / 1m (calc); full space 125 dB
System Power Handling (continuous/program/peak) 175/350/700 Watts
Nominal Impedance 6 Ohms
Minimum Impedance 6 Ohms
Flying No
Frequency Response (-10dB) 40 - 140 Hz
Input Connections Spring Terminal
Internal Crossover Yes
Sensitivity 1W/1m 100 dB
Chassis Size 12 inches
Weight Net 18.1 kg ( 39.9 lbs )
Dimensions (HxWxD) 412 x 584 x 305 mm
(16.22" x 22.99" x 12.01“)
| JBL VRX 918S 18'' 1600W power rating continuous, High Power Flying passive Subwoofer
Key Features :
Integral rigging hardware for simple connection of VRX932LA line-arrays and optional array frame.
18 inch, 2268H Differential Drive? woofer for extended low-frequency output
Large port area for reduced distortion
20 mm threaded pole socket for solid, secure satellite speaker mounting
Specifications:
|
|
|
| Frequency Range |
: |
31 Hz ? 220 Hz |
| Frequency Response |
: |
34 Hz ? 220 Hz |
| Recommended Crossover Frequencies |
: |
80 Hz, 24 dB / octave HPF
80 Hz, 24 dB / octave LPF |
| Power Rating (Continuous / Program / Peak) |
: |
800 W / 1600 W / 3200 W |
| System Maximum SPL |
: |
130 dB SPL peak |
| System Sensitivity |
: |
95 dB SPL |
| LF Driver |
: |
1 x JBL 2268H 457 mm (18 in) Differential Drive woofer |
| Nominal Impedance |
: |
8 ohms |
| Active Tunings |
: |
Tunings available at www.jblpro.com |
| Enclosure |
: |
Rectangular, 18 mm, 13-ply birch plywood |
| Suspension / Mounting |
: |
120 Volts: 9.5 A; 230-240 volts; 5.0 A Optional VRX932LA-AF line array
frame kit |
| Finish |
: |
Black DuraFlex? finish |
| Grille |
: |
Powder coated, black, 16-gauge perforated steel with
acoustical transparent charcoal foam backing. |
| Input Connectors |
: |
Neutrik? Speakon? NL-4 (x2) |
| Dimensions (H x W x D) |
: |
508 mm x 597 mm x 749 mm
(20.0 in x 23.5 in x 29.5 in) |
| Net Weight |
: |
37 kg (81 lb) |
| Optional Accessories |
: |
SRX718S-CVR: Pull-over padded cover
SS4-BK: Adjustable, heavy-duty pole, M20 thread to
35 mm
WK-4: Caster kit
VRX-AF: Array Frame Kit
M-10 eyebolt kit |
|
Reviews
There are no reviews yet.