| Content |
HK Audio IL 112 Sub Installation Line
An extremely compact, direct-loaded subwoofer, the IL 112 Sub delivers natural-sounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82 and IL 8.1 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | | Details | | The IL 112 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1 and IL 82 in the bass range. It is equipped with a direct loaded 12“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 112 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with extremely compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 10 m depending on sound pressure requirements. A controller is not required for operating the IL 112 Sub. It is however, possible to use the Digital Field Controller (DFC).
| | | | Special features | | Housing Principle: Bass Reflex
| | | | Power handling capacity | | | RMS: | | 150 W | | Program: | | 250 W | | Peak (10 ms): | | 500 W | | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 16-1/2" x 16-1/2“
54 cm x 42 cm x 42 cm
| | | | Weight | | 50.6 lbs
23 kg | | | | Service articles | | 12“-speaker E994091 |
|
The S4022 is a compact, high-output band-pass subwoofer dedicated to permanent installations.
The system is equipped with two advanced 12” RCF precision woofers mounted in a clam-shell internal chamber.
The two transducers couple to achieve tight and maximised output. Each 12” features massive ceramic magnets and 3” copper voice coil.
The system is capable of producing a Max SPL of 131 dB and handles 800 Watts AES.
| Features |
|---|
| Compact, arrayable, 2 x 12" bandpass subwoofer system | | 131 dB max SPL, 800 Watt AES | | Equipped with RCF high power 2 x12“, 3" voice coil woofers | | Extensive internal bracing, 8 x M10 mounting points | | Recessed handles | | Baltic Birch cabinet finished in a very resistant, textured, polyurethane black paint | | Epoxy powder coated front grille | | Dedicated to permanent installation |
| Acoustical Specifications |
|---|
| Frequency Response -10 dB: | 40 Hz | ÷ 0.2 kHz | | Max SPL @ 1m: | 131 dB | | | System Sensitivity: | 97 dB | | | Nominal Impedance: | 4 Ω | | | Power Handling: | 800 Watt | | | Peak Power Handling: | 2400 Watt | | | Recommended Amplifier: | 1600 | |
| TRANSDUCERS |
|---|
| Woofer: | 2 X 12" woofer, 3" voice coil | | | Nominal Impedence: | 8 Ω | | | Input Power Rating: | 400 Watts AES | | | Sensitivity: | 97 dB | |
| INPUT SECTION |
|---|
| Input connector: | 2 x Speakon NL4 | |
| CABINET |
|---|
| Cabinet Material: | 15 mm birch plywood construction | | | Hardware: | 8 x m10 mounting points, 2 x recessed | | | Handles: | 2 seitlich | | | Grille: | Custom perforated steel grille | | | Colour: | Black, scratch resistant paint | |
| PHYSICAL SPECIFICATIONS |
|---|
| Height: | 500 / 19.68 mm/inch | | | Width: | 650 / 25.59 mm/inch | | | Depth: | 580 / 22.83 mm/inch | | | Net Weight: | 38 / 83.77 Kg/Lbs |
|
FB-120W
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
Passive subwoofer 12“, 400W rms, frequency response 42 - 200Hz, max SPL 127dB, 2 x balanced speakon. 19,8kg, black color.
- 15-mm plywood enclosure, internally braced, with textured paint
- EVS-12S 12" woofer for powerful, engaging bass response
- Pole mount for full-range systems
| Input Connections | NL4 style (2) | | Nominal Impedance | 8 Ω | | Frequency Response (-3 dB) | 53 - 125 Hz | | Frequency Response (-10 dB) | 42 - 200 Hz | | Sensitivity 1 W/1 m | 94 dB | | Max. SPL/1m (calc) | 127 dB | | System Power Handling (Continuous/Program/Peak) | 400 / 800 / 1600 Watts | | LF Transducer | EVS-12S, 305 mm( 12“) Woofer | | Enclosure Material | 9-ply 15 mm plywood, internally braced with textured paint | | Grill | 16 GA steel with black powder coat | | Height | 400 mm (15.75“) | | Width | 444.5 mm (17.5“) | | Depth | 457.2 mm (18“) | | Shipping Weight | 25.4 kg (56 lbs) |
|
The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.
GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.
|
The black Electro-Voice EVID-S12.1 is a 12” subwoofer designed to provide low-end reinforcement for system designers, installers, and audio engineers configuring systems for background and foreground music in stores, clubs, eateries, schools, and more. Its acoustic ports and 12” dual voice-coil, high-excursion woofer yield a frequency response of 40 to 140 Hz and a 127 dB maximum SPL.
Inputs and outputs utilize spring-loaded speaker terminals. The subwoofer can accept a stereo input and drive up to four satellite speakers (available separately). It includes hardware for mounting to a wall or corner and has an eyebolt for the attachment of a safety line.
12" dual voice-coil, high-excursion woofer and acoustic ports yield a frequency response of 40 to 140 Hz800W peak (200W continuous) power handling for 127 dB maximum SPL (133 dB peak)Spring-loaded speaker terminals for inputs and outputsSimultaneously drive up to four satellite speakers (available separately)Logo can be replaced to match speaker orientationIncludes hardware for mounting subwoofer to a wall or corner
| LF Driver |
1 x 12" / 305 mm |
| Input |
Spring-loaded speaker terminals |
| Output |
Spring-loaded speaker terminals |
| Frequency Response |
40 to 140 Hz (-10 dB) |
| Sensitivity |
104 dB (eighth space on corner averaged 60 to 100 Hz, 1 W) |
| Maximum SPL |
127 dB calculated, 133 dB peak |
| Power Handling |
800 W peak (200 W with continuous pink noise for 100 hours) |
| Low Impedance |
Yes |
| Nominal Impedance |
8 Ohms |
| Dimensions (H x W x D) |
16.3 x 23.0 x 11.9" / 413 x 584 x 303 mm |
| Weight |
39.2 lb / 17.8 kg |
|
Reviews
There are no reviews yet.