Content |
HK Audio IL-115 SUB Installation Line
A compact, direct-loaded subwoofer packing powerful bottom end punch, the IL 115 Sub delivers naturalsounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82, IL 8.1 and IL 12.2 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | Details | | The IL 115 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1, IL 12.2 and IL 15.2 in the bass range. It is equipped with a direct loaded 15“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 115 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 20 m depending on sound pressure requirements. A controller is not required for operating the IL 115 Sub. It is possible, however to use the Digital Field Controller (DFC).
| | | Special features | | Housing principle: Bass reflex
| | | Power handling capacity | | RMS: | | 600 W | Program: | | 1200 W | Peak (10 ms): | | 2400 W | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 17-7/8" x 24-7/8“
54 cm x 45,5 cm x 63 cm
| | | Weight | | 63.8 lbs
29 kg | | | Service articles | | 15“-speaker E994122 |
|
Ειδική έκδοση του AM 7115 για χρήση σε
εξωτερικό περιβάλλον με επιπλέον αναβάθμιση
υλικών προστασίας. Πιστοποίηση IP56 κατά
πρότυπο IEC 529. Παράδοση κατόπιν
παραγγελίας.
Frequency Range (-10 dB): 40 Hz – 4.2 kHz
Frequency Response (±3 dB): 47 Hz - 3.0 kHz
Transducer Power Rating (AES): 1000 W (4000 W peak), 2 hrs
Long-Term System Power Rating (IEC): 600 W (2400 W peak), 100 hrs
Maximum SPL: 50 Hz –125 Hz
125 Hz – 800 Hz: 126 dB-SPL cont avg
(dB-SPL, 1W @ 1m): 50 Hz – 125 Hz
125 Hz – 800 Hz: 97 dB
Nominal Impedance: 8 ohms
Low Frequency Driver: 1 x JBL 2265H 380 mm (15 in) Differential Drive driver with 75 mm (3 in) dual voice coil
Enclosure: Trapezoidal with 15 degree side angles, 16 mm (5/8 in) exterior grade 11-ply Finnish birch plywood
Suspension Attachment: 13 points (3 top, 3 bottom, 2 each side, 3 rear), M10 threaded hardware
Finish: Black DuraFlex™ finish.
Grille: Powder coated 14 gauge perforated steel, with acoustically transparent black foam backing.
Input Connector: NL4 Neutrik Speakon® and CE-compliant covered barrier strip terminals. Barrier terminals accept up to 5.2 sq mm (10 AWG) wire or max width 9 mm (.375 in) spade lugs. Speakon in parallel with barrier strip for loop-through.
Environmental Specifications: Mil-Std 810; IP-x3 per IEC529
Dimensions (H x W x D in vertical cabinet orientation): 548 x 561 x 657 mm
Net Weight: 25.9 kg (57 lb)
Optional Accessories: M10 x 35 mm forged shoulder eyebolts with washers. Optional planar array frame kit. See AE Series Bracket Guide.
| Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 18 S
Description High-power-capacity 18" subwoofer with high-quality
Description crossover for powerful low-end kick
Power handling capacity RMS: 500 W
Power handling capacity Program: 1000 W
Frequency response within +/-3dB 48 Hz ? 150 Hz (internal wedge)
Frequency response @ -10dB 38 Hz ? 150 Hz (internal wedge)
Speaker 1 x 18“
Impedance 4 Ohm
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 129 dB
Crossover frequency 150 Hz/12 db Octave
Connections 2x Speakon
Mounting collar DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar orientation of the speakers towards the audience
Dimensions (WxHxD) 53 cm x 61 cm x 64 cm
Dimensions (WxHxD) 20 3/4? x 24? x 25 1/4?
Weight 41.6 kg
Weight 91.52 lbs |
The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection. Connections are dual Neutrik Speakon and 1/4" jacks. With professional features, excellent sonic performance, and great value, Yamaha Club Concert Series loudspeakers deliver premium quality night after night.
The CW118V enclosure houses a powerful cast-frame 18" woofer with a frequency response of 30Hz - 2kHz. 600W program handling, 1,200W peak. Sensitivity: 96dB. 22“W x 32“H x 25“D. 71 lbs.
Yamaha CW118V 18" Club Concert Series Subwoofer Speaker Features:
- Tough, paintable exterior coating
- Cast-frame 18" woofer
- Frequency response of 30Hz-2kHz (-10dB)
- 600W program handling/1,200W peak
- Sensitivity: 96dB
- 22“W x 32“H x 25“D
|
The S8015 is an extremely compact, high output, band-pass subwoofer able to deliver tight and fast controlled bass response.
The new high power high sensitivity 15" woofer is the result of the latest RCF experience in sub-bass transducers and compact subwoofer design and manufacturing.
The band-pass configuration offers a significant acoustic impact resulting in a fast and controlled reproduction of the bass frequency range.
It is capable of a power of 1 kW RMS and able to deliver a MAx SPL in excess of 135 dB.
The cabinet's shape is unobtrusive rectangular low profile to be used under sofa or under limited height stages; the cabinet is constructed of Baltic Birch plywood and finished in a very resistant, textured black paint.
Rubber feet are also installed.
Applications
- Low Frequency Enhancement
- Under-sofa and under-stage constraints
- Music Enhancement
- Club-Bar Bass Enhancement
- Special Effects Reinforcement
- Entertainment Systems
- Live Music Reinforcement
- Small and Mid Club Sound Systems
- Infill Sub Bass Enhancement
- Auditoriums
- AV presentations
- Retail stores
Features |
---|
15" high-efficiency RCF Precision 4" voice-coil woofer with Inside/Outside Coil Technology | Bandpass woofer | 135 dB Max SPL | Response down to 43 Hz | Rectangular box enclosure |
Baltic Birch cabinet finished in a very resistant, textured black paint with rubber feet
Acoustical Specifications |
---|
Frequency Response -10 dB: | 43 Hz | ÷ 0.25 kHz | Max SPL @ 1m: | 135 dB | | System Sensitivity: | 99 dB | | Nominal Impedance: | 8 Ω | | Power Handling: | 800 Watt | | Peak Power Handling: | 2400 Watt | | Recommended Amplifier: | 1500 | |
TRANSDUCERS |
---|
Woofer: | 15" woofer, 4" voice coil | | Nominal Impedence: | 8 Ω | | Input Power Rating: | 900 Watts AES | | Sensitivity: | 97 dB | |
INPUT SECTION |
---|
Input connector: | Speakon NL4 | |
CABINET |
---|
Cabinet Material: | 15 mm birch plywood construction | | Colour: | Black, scratch resistant paint | |
PHYSICAL SPECIFICATIONS |
---|
Height: | 310 / 12.20 mm/inch | | Width: | 900 / 35.43 mm/inch | | Depth: | 380 / 14.96 mm/inch | | Net Weight: | 23.4 / 51.58 Kg/Lbs |
|
|
The Control SB210 provides low frequency reinforcement for a wide variety of applications. Its compact size, high output and outdoor capable design makes it one of the most versatile subwoofers in the installation market.
- 2 x 250 mm (10 in.) Aluminum/Ceramic Composite Cone Drivers
- 42 Hz to 200 Hz frequency range (-10 dB)
- 400 watts continuous pink noise power capacity (IEC-shaped pink noise for 100 hours)
- 95 dB sensitivity (1W/1m) in half-space
8 ohms nominal impedance - IEC 529 IP-X5 rating. Exceeds MilSpec 810 for humidity, salt spray, temperature & UV
- AV Shielded
- SonicGuard™ Overload Protection
- Dimensions (HxWxD): 355 mm x 590 mm x 570 mm (14 in x 23.3 in x 25.5 in)
- Net Weight: 17.1 kg (38 lbs.)
|
Reviews
There are no reviews yet.