| Content |
HK Audio IL-115 SUB Installation Line
A compact, direct-loaded subwoofer packing powerful bottom end punch, the IL 115 Sub delivers naturalsounding bottom end with remarkably low distortion levels. Particularly well-suited for supporting HK AUDIO IL 82, IL 8.1 and IL 12.2 cabinets. Built-in Hi-cut filter.
| | | Accessories | | N/A
| | | | Details | | The IL 115 Sub is a very compact subwoofer, which extends the frequency response of the loudspeakers IL 8.1, IL 12.2 and IL 15.2 in the bass range. It is equipped with a direct loaded 15“-cone loudspeaker in a bass reflex housing and has a built-in passive crossover. The IL 115 Sub stands out through its powerful, low-distortion and thus natural bass reproduction with compact dimensions. It is ideally suitable for acoustic applications in which the bass range of existing loudspeaker systems should be extended for distances of up to 20 m depending on sound pressure requirements. A controller is not required for operating the IL 115 Sub. It is possible, however to use the Digital Field Controller (DFC).
| | | | Special features | | Housing principle: Bass reflex
| | | | Power handling capacity | | | RMS: | | 600 W | | Program: | | 1200 W | | Peak (10 ms): | | 2400 W | | | | | Dimensions
(wide x tall x deep) | | 21-1/4" x 17-7/8" x 24-7/8“
54 cm x 45,5 cm x 63 cm
| | | | Weight | | 63.8 lbs
29 kg | | | | Service articles | | 15“-speaker E994122 |
|
Yamaha realized more than 40 years ago that simply building systems around speaker units bought from other manufacturers would not do, initiating a long and arduous but fruitful quest for ideal speaker performance based on original technology. Along the way innovative Yamaha speaker technology has resulted in a number of breakthrough products that established new performance standards in a number of critical fields.
Yamaha\'s new Installation Series Speakers address a number of important issues that give them unprecedented performance and handling characteristics for live sound applications, including permanent installations. In particular, phase characteristics have been kept smooth and consistent throughout the entire series, so you can mix and match speakers to suit any system and venue without ending up with hot and dead spots due to phase interference. And of course sonic quality is superb throughout the entire reproduction range so the full impact of the source material reaches the audience undiluted.
-
High power subwoofer.
-
Dual woofers can be switched for discrete drive (IS1215 and IS1218).
-
Twelve 10mm-screw suspension points (M10) provided for flexible rigging.
-
Durable black or white finish (can be painted to match any interior).
-
Optional matching array frame available (for IS1118 and 1218 only).
-
Parallel-wired Neutrik NL4 and barrier strip connectors.
| Drive Mode |
Parallell/Discrete |
|---|
| Frequency Range (-10 dB) |
40 Hz-2.5 kHz |
|---|
| Power Rating (Parallel) |
NOISE: 1400W; PGM: 2800W; MAX: 5600W |
|---|
| Power Rating (Discrete) |
NOISE: 700W x 2; PGM: 1400W x 2; MAX: 2800W x 2 |
|---|
| Nominal Impedance |
Parallel: 4 ohms; Discrete: 2 x 8 ohms |
|---|
| Sensitivity (1 W@1 m) SPL |
Parallel: 97dB; Discrete: 100dB |
|---|
| Calculated Peak SPL |
Parallel: 134dB; Discrete: 134dB |
|---|
| Calculated Continuous SPL |
Parallel: 128dB; Discrete: 128 B |
|---|
| Components |
2x 15" woofer, 4" voice coil |
|---|
| Shape |
Rectangular |
|---|
| Material |
3/4 inch (19 mm), 13-ply Finish Birch (Baffle and Inner Wall), 5/8 inch (16 mm), 11-ply Finish Birch |
|---|
| Grill |
16 gauge powder coated perforated steel grilles, backed w/ acoustically transparent reticulated foam |
|---|
| Connectors |
1 x Neutrik NL4 and barrier strip, wired in parallel |
|---|
| Flying Hardware |
12 x M10 for shoulder eyebolts |
|---|
| Handle |
Four |
|---|
| Dimensions (H x W x D) |
34.8" (883 mm) x 17.6" (448 mm) x 24" (610 mm) |
|---|
| Weight |
139 lbs (63 kg) |
|---|
|
The vented SUB 18 and SUB 28 direct radiators have been designed for subwoofer use in active multiway systems. The superior transient response of the classic bass reflex construction is also well suited for medium to large bass arrays. The premium 700W RMS long excursion woofers feature extremely low THD, and the reliable, all-electronic Voice Coil Tracking Protection prevents thermal overload of the 100mm sandwich voice coils. For maximum dynamics, the SUB models can be driven by extremely powerful amplifiers; thermal overload triggers a virtually inaudible 'soft' power reduction.
Order-# D113129 Cabinet Subwoofer Configuration Vented Direct Radiator Nominal Impedance 8 ohms Rated Power RMS 700 watts Program Power 1400 watts Peak Power 2800 watts SPL 2,83 V/1m 98 dB max. SPL 1m (calc. with Peak) 132 dB Freq. Range (-10 dB) 35Hz - 700Hz Passive X-Over Frequency Hi-Cut VCT Protections yes Components LOW LFS 18700 Order-# D366304 Connectors SPEAKON 2x NL 4MPR 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF --- Pin Wiring Biamped LF --- Dimensons (WxHxD) mm 505x 805x 570 Net Weight 49 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel
|
The Sub 1.15 is the ideal bass extension for the Corus C 12.2 or C 15.2 full-range cabinets.
In the low frequency range between 40 Hz and 260 Hz a Electro-Voice EVS-15S woofer in direct-radiator bass-reflex design produce an max. SPL of 125 dB.
Thanks to their low-pass filter, the Sub 1.15 can be operated simply in parallel mode to existing full-range cabinets. Also recommended, naturally, is the combination with the DSP 260 or DSP 600 and power amplifiers from the SL or LX series for the creation of active two-way systems.
Cabinet Subwoofer
Configuration Vented Direct Radiator
Components 1x 15" EVS-15S
Impedance 8 ohms
Rated Power 500 W
Peak Power 2000 W
SPL 1W/1m 93 dB
max. SPL 1m calc. 125 dB
Freq. Range 40 Hz - 260 Hz
Dimensions (WxHxD) mm 445 x 605 x 550
Net. Weight 28,5 kg
|
FB-120B
Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W
Impedance: 8Ω
Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field
Frequency Response: 40Hz-1.2kHz (+/-10dB)
Dimensions: 16“?16“?17.75" (W?H?D)
Weight: 15kg |
The new Yamaha CW218V features a super durable, paintable, elastomeric-sprayed coating with foam lined acoustically transparent steel grilles. Gives a great professional look much preferred over carpeted enclosures. Assembled by hand in the US by skilled technicians, each cabinet is designed for better low-end response and includes heavy steel handles and sturdy pole sockets to make moving and positioning easy.
The custom drivers from Eminence feature high-strength curvilinear cones and Kapton® voice coil formers, plus oxygen-free copper voice coils and oversize strontium ferrite magnets to provide high power handling and long life. 15" and 18" drivers use cast aluminum frames to support the massive magnet structure, eliminate flex, and dissipate heat. The titanium diaphragm compression driver is mated to a 90 degree x 40 degree custom-designed horn. Internal electronics feature an over-built crossover network and overload protection.
Connections are dual Neutrik Speakon® and 1/4" jacks. With professional features, excellent sonic performance, and great value, Club Concert Series loudspeakers deliver premium quality night after night. The CW218V reigns supreme with 2 cast-frame 18" woofers and 30Hz-2kHz frequency response (-10dB). It features 1,220W program handling with 2,400W peak. Sensitivity: 98dB. 48“W x 23“H x 26“D.
|
Reviews
There are no reviews yet.