HK AUDIO IL-115 SUB Installation Line Speaker 600W

HK Audio IL-115 SUB Installation Line

The SW10 STUDIO subwoofer has been designed specifically for optimum matching with the MSP series powered monitor speakers. Combined with MSP7 STUDIO or MSP5 STUDIO speakers in a stereo of surround system it can provide a seamlessly extended low end for accurate ultra wide range monitoring. A comprehensive selection of inputs and outputs as well as a phase switch and continuous high-cut and level controls make it easy to achieve optimum performance in any room and system. Whether you're simply mixing basic stereo programs or authoring DVD audio in full surround, MSP STUDIO series speakers plus an SW10 STUDIO will give you the ultimate monitoring experience.

GENERAL Type Powered Subwoofer
Crossover Frequency -
Overall Frequency Response 25Hz - 150Hz (-10dB)
Maximum Output Level 111dB, 1 m on Axis
Dimensions (W x H x D) 328 x 459 x 476 mm
Weight 26.5 kg
Magnetic Shielding Yes (Non-covered type)
SPEAKER SECTION Components LF 10" cone
HF -
Enclosure Type Bass-Reflex
Material MDF
AMPLIFIER SECTION Output Power * LF 180W
f = 100Hz, THD = 1%, RL = 8O
HF -
S/N, IHF-A filter > 100dB, LEVEL = Max
Input Sensitivity XLR-3-31 +4 dBu, LEVEL = Center
-6 dBu, LEVEL = Max
PHONE -
Input Connectors, Impedance XLR-3-31 (balanced), 10 kO
Output Connectors XLR-3-32 x 3 (balanced),
parallel connection with Input
Controls LEVEL control Center Click VR
(Min = -8 Attenuation)
LOW CUT switch -
HIGH TRIM -
LOW TRIM -
POWER SWITCH on/off
PHASE SWITCH Normal/Reverse
LPF control 40-120 Hz, 80 Hz at Center Click
Indicators LED Green: Power On
Red: Clipping
Power Consumption 160W
* These specifications apply to rated power supplies of 100, 120, 230 and 240 V.
* Specifications and appearance subject to change without notice.

Παθητικό subwoofer με 15” woofer, ισχύος 400W RMS / 800W peak στα 8Ω. Ευαισθησία 96dB, max spl 124db, τεχνολογία bass reflex. Διαθέτει φωλιά στο πάνω μέρος για την τοποθέτηση σωλήνα στήριξης δορυφόρου, frequency response: 40Hz-300Hz, βάρος: 35Kg.

Χαρακτηριστικά:

• Μικρό σε όγκο για τα δεδομένα του (15” speaker) sub-woofer κατάλληλο για χρήση σε μόνιμες εγκαταστάσεις όπως café, club, discotheque, pub καθώς και φορητή χρήση
• Ιδανικό ηχείο subwoofer για φορητές εγκαταστάσεις, djs και εταιρίες ενοικιάσεων
• Δυνατότητα αναβάθμισης σε αυτοενισχυόμενο subwoofer εύκολα και απλά, προσθέτοντας την ενισχυτική βαθμίδα AVM-2 (δεν περιλαμβάνεται)
• Για την σωστή χρήση του subwoofer απαιτείται τελικός ενισχυτής ο οποίος να έχει ισχύ εξόδου 450W RMS στα 8Ω
• Τέλειος συνδυασμός του subwoofer VIBE15-SUB Mk2 με τα ηχεία VIBE10 Mk2 or VIBE12 Mk2 για δορυφόρους
• Ειδική βαφή με μπογιά πολυουρεθάνης για αντοχή στις γρατζουνιές
• Μεταλλική σήτα με επίστρωση ειδικού ακουστικού αφρού για ένα όμορφο οπτικά ηχείο και την προστασία των υλικών του speaker από σκόνες, χτυπήματα, υγρασία, σταγόνες νερού
• 35mm εσωτερική φωλιά στο πάνω μέρος για την τοποθέτηση του σωλήνα στήριξης του δορυφόρου
• High Power 15inch Woofer με ALU basket
• Ειδικές υποδοχές στο πίσω μέρος του sub woofer για την τοποθέτηση ροδών μεταφοράς (δεν περιλαμβάνονται)
• Ισχύς: 400Wrms (800Wpeak)
• Input impedance: 8Ω
• Input Sensitivity: 96dB 1W/1m
• Max. SPL: 124dB
• Frequency response: 40 - 300Hz
• Διαστάσεις: 440 x 595 x 605 mm
• Βάρος: 35kg

FB-120W

Power Handling Capacity: Continuous pink noise ? 200W, continuous program ? 600W

Impedance: 8Ω

Sensitivity: 90dB (1W/m) free sound field, 96dB (1W/m) 1/2 free sound field

Frequency Response: 40Hz-1.2kHz (+/-10dB)

Dimensions: 16“?16“?17.75" (W?H?D)

Weight: 15kg

The S8028 is a compact, high-output bass reflex subwoofer for high output applications and large installations.

The system is equipped with two advanced neodymium 18” RCF precision woofers mounted in a clam-shell configuration. The two transducers couple to achieve tight and maximised output. Each 18” features massive vented neodymium magnets and 4” copper voice coil. The system is capable of producing a Max SPL of 138 dB and handles 2000 Watts AES.
 

The S8018 II high-efficiency subwoofer is the ideal low-frequency extension to complement RCF installed systems.

The low-frequency transducer is a hypervented vented, high excursion RCF Precision 18” woofer with a 4” inside/outside voice coil to minimize power compression and extend the life of the product.
Using bass-reflex loading the subwoofer design ensures an efficient acoustic response down to 30 Hz. The Baltic birch plywood enclosure is painted with black, heavy duty, textured epoxy. The front is protected by a strong powder coated metal grille. The cabinet features two Neutrik Speakon™ connectors in a recessed input plate. A M20 pole mount adaptor is provided on the top of the cabinet, integrated hand carry points on the cabinet sides.

• 18" high-efficiency 4" voice-coil woofer with Inside/Outside Coil Technology
• 137 dB maximum sound pressure level
• Response down to 30 Hz
• Rectangular box enclosure with protective metal grille
• 35 mm standard pole mount in top section of cabinet
• Baltic Birch cabinet painted with black, heavy duty, textured epoxy
• Integrated hand carry points

• Frequency Response -10 dB: 30 Hz ÷ 200 Hz
• Max SPL @ 1m: 137 dB
• System Sensitivity: 100 dB
• Nominal Impedance: 8 Ω
• Power Handling: 1500 W
• Peak Power Handling: 6000 W
• Recommended Amplifier: 3000 W

• Woofer: 18" woofer, 4" voice coil
• Nominal Impedance: 8 Ω
• Input Power Rating: 1500 W AES
• Sensitivity: 100 dB

• Input connector: Speakon NL4

• Cabinet Material: 15 mm birch plywood construction
• Handles: 2 on side
• Grille: Custom perforated steel grille
• Colour: Black, scratch resistant paint

• Height: 630 / 24.80 mm/inch
• Width: 530 / 20.87 mm/inch
• Depth: 770 / 30.31 mm/inch
• Net Weight: 43 / 94.60 kg/lbs