| Content |
HK Audio IL 12.2 Installation Line | Full-range cabinet for public address and full-range applications offering extraordinary phase linearity, highest speech intelligibility, and considerable dynamic range. The IL 12.2 may be deployed either as a full-range cabinet or as a mid/high cabinet in a configuration with a subwoofer like the IL 115 Sub. The ideal cabinet for public address and music applications that demand high sound pressures levels. Built-in passive crossover.
| | | | | | | | | Details | | The IL 12.2 is a 2-way full-range loudspeaker box with an internal passive crossover. It is fitted with a direct-loaded 12“-cone loudspeaker in a bass reflex housing and a 2“-high frequency driver with CD-horn. This equipment makes a frequency response in the bass range possible which is sufficient for speech transmission and the reproduction of background music even without a subwoofer. The subwoofer IL 115 Sub is available for applications which need an extended frequency response in the bass range. Apart from natural speech reproduction, the IL 12.2 stands out due to its unusual phase linearity an a broad dynamic range. It is ideally suited for acoustic applications for which distances of up to approx. 25 m have to be bridged, depending on the sound pressure requirements. A controller is not required for operating the IL 12.2. It is possible, however, to use the HK Audio Digital Field Controller (DFC).
| | | | Special features | | The 60?°x 40?° horn in IL 12.2 and IL 15.2 cabinets may easily be replaced by an optionally available 90?°x 40?° horn. The 90?° horn can be installed in the place of the 60?° horn without requiring the cabinet???s crossover to be adjusted. Owing to the square design of their housings, both CD horns may be rotated by 90?°. This means that IL 12.2 and IL 15.2 cabinets can be modified to project at four different angles: 60?°x 40?° // 40?°x 60?° OR 90?°x 40?° // 40?°x 90?° More info | | | | Power handling capacity | | | RMS: | | 300 W | | Program: | | 600 W | | Peak (10 ms): | | 1200 W | | | | | Dimensions
(wide x tall x deep) | | 16-1/2" x 25-1/4" x 16-1/8“
42 cm x 64 cm x 41 cm
| | | | Weight | | 66 lbs
30 kg | | | | Service articles | | 12" speaker
2“-driver 2“-diaphragm |
|
Electro-Voice TX1122 Tour-X 2-Way 12" PA Speaker
The Electro-Voice TX1122 is a high power, 2-way loudspeaker system that can be used in a variety of applications where high-quality sound reinforcement is required in a lightweight package.
It utilizes the DH3, high output 1.25" titanium compression driver, coupled to a constant directivity 90 degree x 50 degree horn. This combination results in a smooth response to 20 kHz and excellent pattern control in short to medium throw applications.
The SMX2120 12" woofer has an FEA optimized magnet structure for very low distortion and maximum intelligibility at high SPL levels. The crossover uses steep 24dB/octave slopes with equalization for very smooth response in vocal range, extended HF, and a protection circuit for long-term reliability.
It has a variety of features that make it equally suited for portable or fixed installation applications. The trapezoidal enclosure is constructed out of a combination of plywood and MDF, and coated with EVCoat for maximum strength while still remaining lightweight. The unique grille design is very strong, dent resistant, and features a rotatable logo. Four-way handles allow for gripping in a variety of positions, a pole mount allows for placement on a subwoofer or a tripod. Six 3/8" threaded points allow a single TX1122 to be suspended in a various positions. The recessed input panel with dual NL4 connectors keeps the connectors hidden, while allowing it to be used with the TX1181 subwoofer for extended sub bass on a single amplifier channel, with no additional processing needed.
Order today with the no-risk assurance of our Total Satisfaction and Low Price Guarantees!
- Freq. response (-3 dB): 60Hz - 20kHz
- Freq. range (-10 dB): 45Hz - 20kHz
- Rec. Hi-pass frequency: 45Hz
- Axial sensitivity: 97dB (1W/1m)
- Max. calculated SPL: 130dB
- Horizontal coverage: 90 degree
- Vertical coverage: 50 degree
- Power handling: 500W continuous, 2000W peak
- LF transducer: SMX2120, 12" (305mm) driver
- HF transducer: DH3, 1.25" (32mm) diaphragm compression driver
- Crossover frequency: 1750Hz
- Nominal impedance: 8 Ohms
- Minimum impedance: 5.4 Ohms
- Connectors: (2) Neutrik Speakon NL4\'s
- Enclosure material: plywood and MDF with EVCoat
- Grille: 16 GA steel, black powdercoat, with rotatable logo
- Suspension: (6) 3/8" threaded points - (2) on each side and (2) on the rear of enclosure
- Dimensions (H x W x D): 24.3" x 15.0" x 15.0" (616mm x 382mm x 380mm)
- Net weight: 44.5lbs (20.2 kg)
- Shipping weight: 50.0lbs (22.7 kg)
| A fullrange enclosure in classic 12“/1" format, this cabʼs balanced sonic image, speech intelligibility, and high SPL are certainly impressive. It is the perfect satellite for the PR:O 18 S. The PR:O 12 MA also features 600 watts power circuitry and a Speakon® port for connecting a passive auxiliary cabinet.
Features
Application: Fullrange Cabinet / Satellit
Power Capacity: 400/800 Watt
Max. SPL: 128 dB
Frequency Range: 68 Hz – 19 kHz
Title PREMIUM PR:O
Product Class Passive Systems
Model PR:O 12
Info Classic full-range cabinet doubles as compact PA or part of satellite system.
Power-handling nominal (RMS) 400 W
Power-handling, peak 1200 W
Power-handling, program 800 W
Frequency response +/- 3 dB 68 Hz – 19 kHz
Frequency response -10 dB 60 Hz – 19 kHz
Nominal impedance 8 ohms
Sensitivity 1W 104 dB
Maximum SPL, @ 10% THD 128 dB
Connections 2x Speakon
LF Speaker 12"
HF Driver 1"
Horn characteristics 60° x 40° CD horn
HF protection (passive) Dyn. protective circuit
Crossover frequency 2 kHz,12 dB / oct.
Pole mount DuoTilt 3/7
Rigging points 3x M8
Handles 2, integrated
Enclosure MDF
Grille metal grille with acoustic foam
Finish acrylic painture, black
Dimensions (WxHxD) 39 cm x 57 cm x 36 cm
Weight 18,5 kg / 40.8 lbs. |
Todayʼs sound reinforcement and public address applications require equipment that guarantee exceptional sound quality for a large variety of different events. Multi-functionality is a must in order to be able to react on-site to varying customer demands. The DYNACORD VL122 2-way fullrange cabinet has been optimized acoustically and mechanically for multi-functional applications. With a variety of mounting accessories and decent cosmetics the VL122 is ideally suited to be used in most demanding applications. The VL122 is manufactured from birch plywood and therefore extremely resistant against abuse on the road. The surface is painted with a black 2-component paint that can easily be renovated if sometimes necessary. For the low frequencies and mid frequencies the rugged DND 12350 Transducer is used. High frequencies are radiated from a rotatable 90°*45° CAD optimized constant directivity horn equipped with an Electro-Voice ND6 1.4” driver. The VL122 can be used in passive fullrange mode and can be switched from the outside to ʽbiampedʼ operation. Linear-Phase FIR factory presets for the IRIS-Net RCM-26 module and factory presets for regular digital speaker controllers, e.g. DSP244 are available. EASE and Ulysses data allow fast and precise simulations.
Order-# D113103 Cabinet Full-Range Configuration passive 2-Way or Biamped Mode Nominal Impedance 8 ohms Rated Power RMS 400 watts Program Power 800 watts Peak Power 1600 watts SPL 2,83 V/1m 99 dB max. SPL 1m (calc. with Peak) 131 dB Freq. Range (-10 dB) 60Hz - 20Hz Coverage Angle nom. 90° x 45° Passive X-Over Frequency 1,5 kHz VCT Protections yes Components HIGH Ev ND6-8 Order-# D361493 Components LOW DND 12350 Order-# D366559 Connectors SPEAKON 2x NL 4MPR Pin Wiring Normal/Fullrange 1+/1- Pin Wiring Biamped HF 2+/2- Pin Wiring Biamped LF 1+/1- Dimensions (WxHxD) mm 385x 715x 374 Net Weight 24 kg Enclosure Material Birch Plywood Finish Black 2-Component Structure Paint Grille Powder Coated Steel, Acoustic Foam
|
12-inch Two-Way Passive 90 x 50, 600W Loudspeaker System
- DVX3121 12 LF Transducer with Forced Air Cooling ND2 2 Voice Coil, 1 Exit Neodymium Compression Driver 90 x 50 Coverage Pattern 600W Continuous (2400W Peak) Power Handling High Sensitivity, 131 dB Maximum SPL Adjustable Monitor Angle (45 or 55) 2 Anchor Plates for Single Stud Fittings and 7 Integral Suspension Points Available in Black or White Passive/Biamp Selectable Full Line of AccessoriesThe Electro-Voice Zx3 is the new standard of no compromise audioperformance and versatility in a simple to use, compact package.At its heart are the transducers. First is the DVX3121 high performancelow frequency transducer. EV used advanced computer aided designtechniques to create forced air, directional voice coil cooling for highpower and efficiency. Finite element analysis was used to optimize thesuspension and magnetic structure for long, linear travel to provide lowdistortion and greater LF extension. These features and details, suchas forged magnetic components and special materials, provide reliabilitywith a 500W power rating in a lightweight transducer. Next is theND2, a 2-inch voice coil compression driver based on neodymium motorstructure to allow for maximum output while reducing size and weight toa minimum. Its precision phasing plug and titanium diaphragm providebetter HF performance, while the integral heatsink provides cooling forhigh power output.The high tech enclosure uses injection-molded high-impact polypropylenestructural foam to make the Zx3 incredibly durable. The enclosuregeometry elements have been carefully designed to provide maximumrigidity and bass response. By design the Zx3 is also a perfect solutionfor stage monitors by allowing two angles (45 or 55) without any additionalaccessories.Two coverage patterns are available; 60 x 60 coverage for long-throwand cluster applications, 90 x 50 coverage for wider coverage or shorterdistances.The Zx3 is equipped with two anchor plates for rigging with single studfittings,along with two more possible anchor plate attachment points onthe bottom. For permanent suspension or attaching brackets, the Zx3also has two M8 inserts on the top and bottom, two under the handle,and one on the back of the enclosure, for a total of 7. All versions areavailable in black or white.
- Freq. Response1 (-3 dB): 58 Hz - 15 kHz
- Freq. Range1 (-10 dB): 48 Hz - 20 kHz
- Rec. Hipass Frequency: 50 Hz
- Axial Sensitivity1: 97 dB (1W/1m)
- Max. Calculated SPL: 131 dB
- Horizontal Coverage: 90
- Vertical Coverage: 50
- Power Handling (Passive): 600W Continuous, 2400W Peak
- LF Power Handling (Biamp): 500W Continuous, 2000W Peak
- HF Power Handling (Biamp): 40W Continuous, 160W Peak
- LF Transducer: DVX3121, 12 in (305mm) Driver
- HF Transducer: ND2, 1 in (25.4mm) exit Neodymium
- Compression Driver
- Crossover Frequency: 2 kHz
- Nominal Impedance: 8 Ohms
- Minimum Impedance: 6.2 Ohms
- Connectors: (2) Neutrik Speakon NL4s
- Enclosure Material: Polypropylene Structural Foam
- Suspension: Enclosure has locations for 4 Single-Stud
- Attachment Plates and 10 Forged Steel
- Eyebolts - 2 on Top, 2 on Bottom, 2 on
- Side, and 1 on Rear of Enclosure
- Grille: Polyester Powder Coated, 16GA
- Galvanized Steel, with Rotatable Logo
- Dimensions (H x W x D): 613mm x 397mm x 362mm: (24.14 x 15.64 x 14.26)
- Net Weight: 19.8 kg (43.7 lbs)
- Shipping Weight: 22.1 kg (48.6 lbs)
|
Active or Passive Passive
Frequency Response -10dB:48-20,000Hz
Power Capacity 600W
Maximum Sound Pressure Level (SPL) 131dB
Nominal Sensitivity 97dB
Impedance 8 ohms
Crossover 2KHz
Low Frequency Driver DVX3121, 12" (305mm) Driver
High Frequency Driver ND2, 1" (25.4mm) exit Neodymium
Enclosure Material Polypropylene Structural Foam
Input Connections Glandnut SJO cable
Mounting Options Enclosure has locations for 4 Single-StudAttachment Plates and 10 Forged SteelEyebolts - 2 on Top, 2 on Bottom, 2 onSide, and 1 on Rear of Enclosure
Dimensions 24.14 x 15.64 x 14.26" (613 x 397 x 362mm)
Weight 43.7 lbs (19.8 kg) |
Reviews
There are no reviews yet.