HK AUDIO PREMIUM PRO 12 – 2 WAY SPEAKER

Professional Sound Tools for Musicians

 
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.

Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.

Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.

PREMIUM PR:O - PR:O 12
 
Description  Classic full-range cabinet doubles as compact PA or part of
Description  satellite system
Power handling capacity  RMS: 400 W
Power handling capacity  Program: 800 W
Frequency response within +/-3dB  68 Hz ? 19 kHz
Frequency response @ -10dB  60 Hz ? 19 kHz
Speaker  1x 12?
Impedance  8 Ohm
HF driver  1?
Axial sensitivity 1w/1m half-space  104 dB
Maximum SPL 10% THD half-space  128 dB
Crossover frequency  2 kHz/12 db Octave
Connections  2x Speakon
Mounting collar  DuoTilt? speaker-stand mounting collar for fast, easy
Mounting collar  orientation of the speakers towards the audience
Rigging points  side-mounted M8 threaded rigging points for easy installation
Dimensions (WxHxD)  39 cm x 57 cm x 36 cm
Dimensions (WxHxD)  15 1/4? x 22 1/2? x 14 1/4?
Weight  18.2 kg
Weight  40.04 lbs

Chassis Size    304.8 mm (12“)
Color    Black
Color    White
Directivity Index    11.1 dB
Input Connections    Four-pin Speakon (2)
Speaker Type    Fullrange
Speaker Type    Mid-High
Speaker Type    Two-Way
Frequency Response (-10 dB)    50 - 20000 Hz
Internal Crossover    Yes
Sensitivity 1 W/1 m    99 dB
Max. SPL/1m (calc)    131 dB
Coverage
(Nominal -6 dB) H°    65 °
Coverage
(Nominal -6 dB) V°    65 °
System Power Handling (Continuous/Program/Peak)    300 Watts
LF Transducer    DL12BFH
HF Transducer    DH2010
Crossover Frequency    1500 Hz
Nominal Impedance (Passive)    8 Ω
Minimum Impedance    6 Ω
Flying    Yes
Outdoor    No
Height    586 mm (23.07“)
Width    429 mm (16.89“)
Depth    312 mm (12.28“)
Weight Net    14.5 kg (31.97 lbs)

Features

    * DVX3121 12" LF Transducer with forced air cooling
    * ND2 2" Voice Coil, 1" Exit Neodymium CompressionDriver
    * 90° x 50° Coverage Pattern
    * 600W Continuous (2400W peak) power handling
    * High sensitivity, 131 dB maximum SPL
    * Adjustable monitor angle (45° or 55°)
    * 2 Anchor plates for single stud fittings and 7integral suspension points
    * Available in black or white
    * Passive/biamp selectable
    * Full line of accessories

Specifications

    * Frequency Response (-3dB): 58Hz-15kHz
    * Frequency Range (-10dB): 48Hz-20kHz
    * Rec. Hipass Frequency: 50Hz
    * Axial Sensitivity: 97dB (1W/1m)
    * Max. Calculated SPL: 131 dB
    * Horizontal Coverage: 90°
    * Vertical Coverage: 50°
    * Power Handling (Passive): 600W continuous, 1200Wprogram, 2400W peak
    * LF Power Handling (Biamp): 500W continuous, 1000Wprogram, 2000W peak
    * HF Power Handling (Biamp): 40W continuous, 80Wprogram, 160W peak
    * LF Transducer: DVX3121, 12" driver
    * HF Transducer: ND2, 1" exit Neodymium compressiondriver
    * Crossover Frequency: 2kHz
    * Nominal Impedance: 8 ohms
    * Minimum Impedance: 6.2 ohms
    * Connectors: (2) Neutrik Speakon NL4\'s
    * Enclosure Material: Polypropylene structural foam
    * Suspension: Enclosure has locations for 4 single-studattachment plates and 10 forged steel eyebolts - 2 on top, 2 on bottom, 2 onside, and 1 on rear of enclosure
    * Grille: Polyester powder coated, 16GA Galvanizedsteel, with rotatable logo
    * Dimensions (H x W x D): 24.14" x 15.64" x 14.26“
    * Net Weight: 43.7 lbs
    * Shipping Weight: 48.6 lbs

With the newly designed D12W, DYNACORD fulfills a longtime customer demand for a light-weight , extremely robust highperformance professional 12" 2-way plastic cabinet for use in professional, portable and fixed install sound reinforcement applications.
With a variety of suspension accessories and conservative cosmetics, the D12 is ideally suited to be used in demanding fixed installations. The cabinet is manufactured from Polypropylene and therefore is extremely resistant against abuse on the road.
For low frequencies an Electro-Voice DL12BFH is used. The recently developed Electro-Voice ND2 Neodymium driver is used for the projection of mid and high frequencies. The Constant- Direcctivity HF horn has been integrated into the baffle by CAD methods.Nominal coverage angle of the cabinet is 80°*40°, horizontal*vertical respectively. Power handling of the cabinet is 300W (continuous) and 1200W peak.. Maximum sound pressure level is 129dB, the frequency range of the D12 is 70Hz to 18kHz. The D12 is ideally suited for applications as full-range cabinet or as Mid-Hi cabinet in in highperformance small-format active and passive satellite systems.

The C5212 W is a full range extremely versatile wide-dispersion two-way loudspeaker system for medium throw applications.

The high-frequency section is a constant directivity horn loaded to a 1.4” Neodymium compression driver with a 2.5” diaphragm assembly for smooth, wide dispersion.
The low-frequency transducer is a 12” woofer with a 3” voice coil.
The crossover is easily bypassed for bi-amp via a recessed changeover switch.