| Content | Professional Sound Tools for Musicians
Professional Components
At the heart of the PREMIUM PR:O full-range cabinets is a new 1" driver with ultra-low-distortion
that renders a very natural-sounding image even at peak loads. The 60° x 40° horn to which this
driver is coupled ensures uniform system directivity that is sure to delight performing musicians,
sound techs, and audiences alike.
Professional Features
The new PREMIUM PR:O series? high-value interior is reflected in the exterior?s smart appearance
and modern appointments. The ergonomically shaped and positioned handles are recessed into the
enclosures, with no projecting parts or screws that could ruin auto upholstery. In addition, the full-range
models feature countersunk rigging points for fast, professional fixed installation. For added convenience,
the subwoofer is pre-fitted with threaded bushings to accept optionally available casters. The ingeniously
simple DuoTilt? pole mount gives you a choice of angles at which to aim the speakers directly at your
audience, but without the hassle and risk of wobbly tilt units.
Dynamic protection circuit for the highfrequency driver
PREMIUM PR:O Series mid/high units and monitors are equipped with special protective circuitry.
Located in the high-frequency signal path, it limits output levels whenever the 1" driver approaches
the overload threshold.
PREMIUM PR:O - PR:O 12 M
Description For a band, monitors play an important role too. The classic
Description monitor for vocals/guitar is a 12" monitor. The PREMIUM PR:O
Description 12 M monitor is designed without compromise exactly for this
Description application to provide the highest possible level of on-stage
Description performance.
Power handling capacity RMS: 400 W
Power handling capacity Program: 800 W
Frequency response within +/-3dB 70 Hz ? 19 kHz
Frequency response @ -10dB 63 Hz ? 19 kHz
Speaker 1x 12?
Impedance 8 Ohm
HF driver 1?
Axial sensitivity 1w/1m half-space 104 dB
Maximum SPL 10% THD half-space 128 dB
Crossover frequency 2 kHz/12 db Octave
Connections 2x Speakon
Dimensions (WxHxD) 39 cm x 55,5 cm x 38 cm
Dimensions (WxHxD) 15 1/4? x 21 3/4? x 15?
Weight 16 kg
Weight 35.2 lbs |
- Compact high-performance stage monitor with top-of-the-range technologies
- Class-D power amplifier with 300 W RMS/1200 W peak and 127 dB max. SPL
- Coaxial design for true point source with a 1.75" titanium-diaphragm HF driver
- 12" woofer with 2.5" voice coil
- Optimised, practical radiation pattern due to 50° x 90° CD horn
- DynX® DSP (Gen.2) for distortion-free sound even at maximum volume
- 3-band EQ, Notch filter, 4 application presets and delay function
- PowerCON compatible loop-through professional power connection
- 35 mm speaker stand flange for FOH applications
- Durable Polyurea coating and heavy-duty front grille
General
Product type
Stage monitors
System output (RMS)
300 W
System output (Peak)
1200 W
Max. SPL Average (Sine burst)
120 dB (100 Hz - 12 kHz, fullspace @1m, 10% THD)
Max. SPL Peak (Sine burst)
127 dB (fullspace @1m, 10% THD)
Frequency response (-3 dB)
68 - 18000 HZ
Frequency response (-10 dB)
55 - 20000 Hz
Crossover frequency
1400 Hz
Dispersion (H x V)
50° x 90°
Features
3-band EQ (High, Mid, Low), Delay line, Notch filter
Low/mid woofer
Low/mid Woofer dimensions
12 "
Woofer dimensions (mm)
304.8 mm
Woofer type
Coaxial loudspeaker
Woofer voice coil (mm)
65 mm
Cabinet construction
Bass Reflex
Cabinet material
15 mm Birch Plywood, 15 mm MDF
HF
Tweeter dimensions (mm)
25.4 mm
Tweeter brand
Custom-made
Tweeter voice coil
1.75 "
Tweeter voice coil (mm)
44.45 mm
Amplifier module (integrated)
Protection circuits
Multiband limiter, over voltage, over-current, thermal overload
Operating Temperature
0 - 40 °C
Humidity Range
< 80 % ( non-condensing )
Controls
On / off switch, Rotary/push encoder
Operating voltage
100 V AC - 240 V AC, 50 - 60 Hz
Power in / out
PowerCON compatible
Line input connectors
6.3 mm jack, XLR - combo
Line through connector
XLR
|
Color Black
Input Connections Parallel Neutrik® NL4
Speaker Type Fullrange
Frequency Response (-3 dB) 65 - 20000 Hz
Frequency Response (-10 dB) 45 - 20000 Hz
Internal Crossover Yes
Recommended High-Pass Frequency 45 Hz
Sensitivity 1 W/1 m 100 dB
Max. SPL/1m (calc) 133 dB
Coverage
(Nominal -6 dB) H° 90 °
Coverage
(Nominal -6 dB) V° 50 °
Rotatable Horn No
System Power Handling (Continuous/Program/Peak) 500 Watts
LF Transducer SMX2151
HF Transducer DH3
Crossover Frequency 1750 Hz
Nominal Impedance (Passive) 8 Ω
Minimum Impedance 6.2 Ω
Enclosure Material Plywood and MDF with EVCOAT
Flying No
Height 475 mm (18.7“)
Width 439 mm (17.28“)
Depth 655 mm (25.79“)
Weight Net 23.5 kg (51.81 lbs) |
PRICE PER UNIT
The most powerful AX monitor With its power and radiation characteristics, the brand new A8X is suitable for both nearfield and midfield monitoring. With a price/performance ratio that could hardly be better, this monitor is a perfect entry into these monitoring fields. The A8X is equipped with the X-ART tweeter and a large (8.5”) midwoofer, a combination that adds both a very deep and yet very tight bass response to the unsurpassed reproduction qualities of the ADAM proprietary tweeter: a licence to thrill. Cabinet- and bass reflex-construction Like the other AX-Series models, the upper corners of the A8X are slanted to minimize reflections. The very large, double bass reflex tubes on the front have been specifically designed to perfectly match the midwoofer with its large voice coil. Amplification and controls With a 50W A/B amplifier for the tweeter and a 150W PWM amplifier for the midwoofer, the A8X has power in abundance and is the brawny monitor of the AX-Series. On the rear panel are several controls: a gain for the high frequencies (± 4dB) and two shelf filters for the high and low frequencies.
There are both XLR (balanced) and RCA (unbalanced) connectors on the rear panel of the speaker, which allow the A8X to be used in almost any application. Review: A8X: a "powerful link" between near- and midfield monitors! "The A8X is a powerful link between ADAM´s AX Series and the formidable and more expensive SX Series. Its all-in-all homogenous tuning, the deep and precise bass as well as the brilliant mid- and high-frequency reproduction make this speaker a huge recommendation for ambitious people without deep pockets." (Professional Audio 10/2010) | Mid-Woofer |
| | Number | 1 | | Basket Ø | 8.5" (220 mm) | | Voice coil Ø | 1.5" (38 mm) | | Cone material | Carbon/Rohacell/Glass Fiber | | Tweeter |
| | Number | 1 | | Type | X-ART | | Diaphragm area | 4 inch² (2420 mm²) | | Equiv. Diaphragm Ø | 2" (56 mm) | | Velocity transform ratio | 4:1 | | Diaphragm weight | 0.17 g | | Built-in Amplifiers |
| | Mid-Woofer | 1 | | Type | PWM | | Amp. power RMS / music | 150 W / 225 W | | Tweeter | 1 | | Type | A/B | | Amp. power RMS / music | 50 W / 75 W | | Control panel |
| | Input Sensitivity | -∞ to +14 dB | | High Shelf EQ > 5 kHz | ±6 dB | | Low Shelf EQ | ±6 dB | | Tweeter gain | ±4 dB | | Input connectors |
| | Analog | XLR / RCA | | General data |
| | Frequency response | 38 Hz - 50 kHz | | THD 90dB/1m > 100 Hz | ≤0.5 % | | Long term output | ≥112 dB | | Max. peak | ≥120 dB | | Crossover frequencies | 2300 Hz | | Input impedance | 30 KOhm | | Weight | 28.7 lb (13 kg) | | Magnetically shielded | No | | Height x Width x Depth | 15.5" (400 mm) x 10" (255 mm) x 12.5" (320 mm) | | Warranty | 5 Years |
| Delivery contents | | Power cord, Manual |
|
The CS2.1 Cuban Speaker features a 2" full range loudspeaker with a shielded neodymium magnet, which is capable of producing up to 10 W RMS, with a maximum of 20 W. The standard speaker impedance is 8 Ohm, but through an additional 100 V Line transformer, it also can be used on 100 V PA systems.
- Model Name / Type: AUCS2.1 / cuban speaker
- Max . Power: 20 W
- RMS Power: 10 W
- Sensitivity (1 W / 1 m): 85 dB
- Max. SPL: 95 dB
- Impedance: 8 ohms
- Frequency Response (±3 dB): 250 Hz - 18 kHz
- Dimensions (W x H x D): 102 x 102 x 90 mm
|
Features :
Compact and low-profile for minimal obstruction of audience sight-lines.
70°x 70° nominal coverage.
Bi-amplified or full-range passive operation.
Pole socket for applications requiring pole or tripod mounting.
High power handling, low distortion Vented Gap Cooling™ LF driver.
3 in. (diaphragm) neodymium magnet compression driver.
Rugged DuraFlex™ coated enclosures sized to be truck pack friendly.
14-Gauge steel grille lined with acoustically transparent cloth.
Specifications :
Frequency Range ( –10 dB) : 50 Hz-20 kHz
Frequency Response (± 3 dB) : 75 Hz-20 kHz
Coverage Pattern : 70˚ × 70˚ nominal
Sensitivity (1W/1m) : 95 dB
Power Rating
(Cont. Pink Noise/Program/Peak) : 800 W / 1600 W / 3200 W
(Continuous/Program/Peak)
Rated Maximum SPL : 130 dB SPL Peak
Nominal Impedance : 8Ω
Input Connectors : Two NL4
Operational Modes : Full Range/Bi-Amp
Dimensions (H x W x D) : 571 mm x 355 mm x 264 mm
(22.5" x 13.4" x 10.4“)
Net Weight : 19 kg ( 42 lbs)
![acrobat_reader_logo.]( "acrobat_reader_logo.") User's Manual
|
Reviews
There are no reviews yet.