| Content |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
| Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
|
Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
|
Put Your iPad Right Where You Need It
Introducing the iKlip 2 for iPad mini - a newly designed multi-angle lightweight universal iPad mini microphone stand adapter. We've taken the hugely successful iKlip Microphone Stand Adapter and made it even better and easier to use. Now take your favorite iPad music apps to the stage for live performance with solid, dependable secure support and multi-angle global positioning.
We've Got You Covered
The new iKlip 2 for iPad mini is easy to use in any live setting - onstage, in the studio, at school, at home or in the boardroom. With its new ball joint multi-angle adjustable design, you can securely position your iPad for optimal viewing and accessibility, while all controls, buttons and connection ports remain free from obstruction. Plus, the iKlip 2 can now be attached to beefier mic stand poles - up to 1.2" diameter.
| Features |
|---|
- Sturdy, durable thermoplastic construction with sure-grip touch points - securely holds your iPad without scratching or marring it
- Universal stand mount clip securely attaches to virtually any microphone stand up to 1.2" in diameter
- Multi-angle and multi-rotational adjustment allows precise positioning for optimal stage or studio viewing
- Quick-snap clips provide fast, secure iPad insertion
- Fast installation - iKlip installs on your mic stand in seconds with the twist of a knob
- All controls, buttons and connectors are accessible when your iPad placed in the iKlip
- Ball-joint positioning system provides quick 360° rotation for any viewing orientation
- Can be mounted on the vertical part of a mic stand, or on a horizontal boom for limitless positioning
- Designed and manufactured in Italy
|
|
Meet Quartet
The ultimate desktop audio interface and control center for iPad and Mac
Apogee Quartet is a professional USB audio interface designed to deliver the ultimate desktop recording experience to the iPad and Mac-based studio. Featuring 4 inputs and 8 outputs of Apogee\'s industry-leading AD/DA conversion technology as well as 4 world-class mic preamps, Quartet bridges the gap between the 2-channel Apogee Duet and Apogee\'s flagship interface, Symphony I/O.
Quartet for iPad and Mac features special circuitry designed to deliver professional performance for iPad use along with low latency USB 2.0 performance for Mac. Quartet\'s MIDI I/O connector lets you connect and power a Core MIDI compatible keyboard/controller while using Duet with your iPad or iOS device.
Legendary Sound Quality
Why Apogee Quartet is the best choice for your studio
Apogee is an award-winning industry leader in digital recording technology with over 25 years of experience. Preferred by recording pros around the world, Apogee products like Duet, Ensemble and Symphony I/O have been instrumental in creating countless GRAMMY® and OSCAR® winning recordings and have set the industry standard in professional recording for over two decades. Quartet is built solidly on this reputation.
Highlights
- First professional multi-channel audio interface for iPad
- Direct digital connection to iPod touch, iPhone, iPad
- Works with new iPhone 5, iPad (4th generation), iPad mini
(Apple\'s Lighting to 30-pin adapter required - Sold separately)
- Works with GarageBand, Auria, MultiTrack and any Core Audio compliant app on iOS
- Works with GarageBand, Logic, Pro Tools, Ableton and any Core Audio compliant app on Mac
- Low latency monitoring, complete input/output control with Apogee\'s Maestro software (iOS & Mac)
- MIDI input/output (USB-A type connector)
- DC power supplies charge to iPod touch, iPhone or iPad
- USB 2.0 audio with 24-bit/192kHz A/D and D/A conversion
- 4 Analog inputs with world-class mic preamps and selectable 48v phantom power
- ADAT/SMUX digital Inputs
- Monitor control - up to 3 speaker sets
- 1 Independent 1/4" stereo headphone output
- QuickTouch pads for input/output selection and advanced control
- Legendary Apogee sound quality
- Designed in California - Made in the U.S.A.
Specifications
System Requirements:
Mac OS:
- Computer: Intel Mac 1.5GHz or faster
- Memory: 2 GB RAM minimum, 4 GB recommended
- OS: 10.6.8, 10.7.4 or greater
- Connection and power: Any available USB port on a Mac
- Power: DC Power supply included
iOS:
- iOS version: 5.1.1 and later
- Connection: 30-pin dock connector
- DC Power supply included
iOS device compatibility (Lightning connector)
* Requires Apple\'s Lightning to 30-pin adapter. Sold separately.
iOS device compatibility (30-pin connector)
Compatible Software:
- Mac
- Any Mac Core Audio compatible application
- Recommended apps: Logic, GarageBand, MainStage, Final Cut, Pro Tools, Ableton Live, Digital Performer, Studio One, Cubase, and Nuendo
- iOS
- Any iOS Core Audio compatible app. Recommended apps: GarageBand, Auria
Features:
- USB 2.0 High-speed Mac audio interface
- 4 Analog Inputs:
- Combination line (balanced +20dBu max)
- Mic/Instrument (+20dBu/+14dBu max)
- 4 Microphone preamps with up to 75dB of gain
- Selectable 48v phantom power, Soft Limit and phase invert
- Digital Inputs:
- ADAT/SMUX Input, 8 channels, 2 Toslink connectors, 44.1kHz to 96kHz
- MIDI input (USB-A type connector)
- 8 Analog Outputs:
- 6 Balanced line outputs, +20 dBu maximum output level
- 1 Independent 1/4" stereo headphone output
- Digital Outputs:
- MIDI output (USB-A type connector)
- Word clock output on BNC connector
- A/D and D/A conversion: 24 bit/192kHz
- 2 top panel high-resolution OLED displays
- Controller knob
- 6 touchpads for direct selection of inputs and outputs
- 3 assignable touchpads to control:
- Mute Outputs
- Dim Outputs
- Sum to Mono
- Clear Meters
- Engage Speaker Set (allows monitoring of up to 3 pairs of speakers)
Mic Pre:
- EIN: 128dB (un-weighted) @ 60dB, 150Ohm input
- Max input level: +20dBu
- Input impedance: 3KOhm
Hi-Z:
- Max input level 14 dBu
- Input impedance: >2MOhm
A/D conversion:
- Max input level (+4dBu ref): +20dBu
- Max input level (-10dBV ref): +6dBV
- Input impedance: 5KOhm
- Freq resp 20 Hz -20Khz: > +/-0.2dB (@44.1Khz)
- Rel. THD + N: -106dB (@ 96Khz)
- Dyn. Range: 114dB (A-weighted)
D/A conversion:
- Max output level (+4dBu ref): +20dBu
- Max output level (-10dBV ref): +6dBV
- Line output impedance: 90 Ohm
- Max output level headphones: 19dBu
- HPH output impedance 30 Ohm.
- Freq resp 20Hz -20 Khz: > +/- 0.05dB (@44.1Khz)
- Rel. THD+N : -113dB (@96Khz)
- Dyn Range: 123dB (A-weighted)
In the box:
- Quartet
- 2 meter USB Cable
- Universal Power Supply with standard 3 pin-IEC cable
- QuickStart Guide
- Instructions for download of software and complete documentation
| The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
Apogee ONE makes the legendary quality of Apogee's mic preamps, AD/DA converters and clocking available in a portable form, designed to deliver the purest recordings and best listening experience possible.
Meet ONE The first studio-quality microphone and audio interface for iPad and Mac The all new Apogee ONE is the first studio quality microphone and USB audio interface for iPad and Mac. ONE is designed for easily creating professional and amazing sounding recordings on your iPod touch, iPhone, iPad or Mac. Using Apogeeʼs premium AD/DA conversion, ONE produces pristine music, podcast, and voice-over recordings while also delivering audiophile quality sound to your headphones. Highlights: - First studi+I85o quality audio interface and microphone for iPad - New circuitry, mic capsule and upgraded sound quality - Redesigned die cast aluminum chassis - Direct digital connection to iPod touch, iPhone, iPad - Works with new iPhone 5, iPad (4th generation), iPad mini - (Lighting adapter required - Sold separately) - Works with GarageBand, MultiTrack, Spotify; Any Core Audio compatible app on iOS - Works with GarageBand, Logic, Pro Tools, Ableton, iTunes; Any Core Audio compatible app on Mac - Low latency monitoring, complete input/output control with Apogeeʼs Maestro software (iOS & Mac) - DC power supplies charge to iPod touch, iPhone or iPad - Optional battery operation for remote recording on iPad (2 AA batteries not included) - USB 2.0 audio with 24-bit/96kHz A/D and D/A conversion - Built-in omnidirectional condenser microphone (mic stand adapter included) - 2 Analog Inputs (XLR microphone and 1/4? instrument connector on breakout cable) - Record up to 2 inputs at a time (instrument + internal microphone or external microphone) - 1 1/8? stereo output for headphones or powered speakers - Legendary Apogee sound quality - Designed in California - Made in the U.S.A.
Features/Specifications - Material: Die cast aluminium body, moulded rubber base
- Input 1 options: Built-in microphone, Instrument IN on 1/4“, External microphone - XLR IN on breakout cable
- Input 2 options: Instrument + Built-in microphone, Instrument + External microphone
- Phantom Power: 48V on mic input
- Analog Outputs: 1/8" stereo OUTPUT for headphones or powered speakers
- Level meters: LED
- Mac connection: USB 2.0 High-Speed
- iOS device connection: USB/30-pin dock port, USB lightning connector (sold seperately) (5th gen iPod touch, iPhone 5, 4th gen iPad, iPad mini)
- AD/DA Conversion: 25 bit, up to 96 kHz sample rate
- Compatibility: Mac, iPod touch, iPhone, iPad
- Apogee Maestro control software: Mac, iPod touch, iPhone, iPad
- Built-In Microphone: Condenser/Omnidirectional
- Sound quality: 2nd Gen
- Power: Mac: bus-powered, DC optional, iOS: DC or AA battery power required
- Includes: ONE, Mic stand clip, MAC USB cable, iOS 30-pin cable, breakout cable, universal power supply, QuickStart guide
|
System Requirements iOS: Devices: iPad and iPhone 4
iOS version: 4.3 and later Connection: Dock connector port (no batteries required) *Software: Made for GarageBand Mac OS: Computer: Mac, with an Intel processor
Memory: 1 GB minimum of installed RAM, 2 GB recommended
Mac OS version: 10.6.4 or later
Connection: USB 2.0 Full Speed Software: GarageBand, Logic Pro, MainStage or any Core Audio compatible application Features -
PureDIGITAL instrument connection delivers pristine sound quality -
Designed for electric guitar and bass -
No confusing setup, you can start recording in minutes - Works with GarageBand on iPad and iPhone or with any Core Audio compatible application on a Mac
-
Control knob allows easy input level adjustment -
Multicolor LED for status indication and input level monitoring -
Studio quality instrument preamp with up to 40dB of gain -
High quality locking output connects directly to iPad and iPhone or USB port on a Mac -
44.1kHz, 24-bit analog-to-digital conversion -
Auto Soft Limit for optimal input level - Powered by connection to iPad, iPhone or Mac
-
Made in the U.S.A.
In the box - JAM
- 0.5m cable for connection to iPad and iPhone
- 1m cable for connection to Mac
- Quick start guide
- Velcro strip
|
Reviews
There are no reviews yet.