| Content |
“Hey, Iʼve got an idea!” So youʼre hiking out in the middle of the woods. Maybe mountain climbing in the Himalayas with a Sherpa. Or youʼre on the tour bus at 3 am and canʼt sleep. And then…BOOM, an idea hits you. You stop everything, grab your guitar and your mic, plug them into your iRig Pro DUO, and then you plug it into your iPad. Or your Android. Or your computer.
You hit "Record,” and that idea that was once just floating around in your head is a song that you can upload for all your fans and followers to hear.
iRig Pro DUO is made for this. Itʼs made for you. Now you can truly go out and play and record anywhere, any time on any device with the smallest fully-featured dual-channel interface on the market.
Features
- Truly mobile dual input audio interface for iPhone, iPad, Android, Mac and PC
- Simultaneous dual track recording interface for all instruments
- Ultra-compact housing for extreme portability
- Dual identical XLR/TRS combo input jacks
- Dual ultra-low noise studio-quality IK preamps
- Individual input gain controls
- 48V phantom power
- Self-powered (2 AA batteries), device powered or DC power adapter (not included)
- 24-bit AD-DA converters
- Dual 1/4” switchable TRS balanced outs
- 1/8” 3.5mm Headphone out w/ level control
- MIDI IN/OUT jacks
- Ultra-compact housing fits in the palm of your hand
- Comes with mini-DIN to Lighting, Micro USB OTG and standard USB cables
- Designed and made in Italy
Specs
iRig Pro DUO Specifications
Microphone Input
- Microphone Inputs: 2x balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Range: 48 dB
- Phantom Power: +48V ± 4V
- Frequency Response:
• from 5 Hz to 21 kHz (-3dB) Gain @ min
• from 30 Hz to 21 kHz (-3dB) Gain @ max
- Input Noise:
• -103 dB(A) Gain @ min
• -86 dB(A) Gain @ max
Instrument Input
- Instrument Inputs: 2x unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Instrument Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 1 MOhms
- Gain Range: 27 dB
- Frequency Response:
• from 2 Hz to 21 kHz (-3dB) Gain @ min
• from 5 Hz to 21 kHz (-3dB) Gain @ max
- Input Noise:
• -104 dB(A) Gain @ min
• -102 dB(A) Gain @ max
Line Output
- Line Outputs: 2x balanced, TRS 1/4” Jack, Tip: hot / Ring: cold / Shield: ground
- Floating Balanced Outputs with automatic level compensation when working in unbalanced mode
- Maximum Output Level: +16 dBu into 600 Ohms balanced load
- Instrument Input Impedance: 1 MOhms
- Frequency Response: from 10 Hz to 21 kHz (-3dB)
- Output Dynamic Range: 106 dB(A)
- Output Impedance: 150 Ohms balanced
Common
- AD and DA Resolution: 24-bit
- Sampling Rate: 44.1 kHz and 48 kHz
- Power: USB bus power, battery power (2xAA), or DC power supply (9VDC - 500mA min. positive outside - not included)
- Metering: Multicolor LED
- Size: 75mm/2.95" x 127mm/5" x 37mm/1.46“
- Weight: 197.2g/6.96oz (batteries excluded)
- Battery Life:
• Recording - Max load*: 3 hours, 30 minutes (NiMH rechargeable); 45 minutes (Alkaline)
• Playback - Min load**: 10 hours (NiMH rechargeable); 3 hours (Alkaline)
*Max load condition: both inputs connected to two 1,5mA phantom powered loads, input gains set to maximum, outputs set to maximum.
**Min load condition is as follow: music playng, phantom power OFF.
Package includes
- iRig Pro DUO universal dual channel Audio-MIDI interface
- Lightning to Mini-DIN connection cable (60cm/23.62“)
- Micro-USB-OTG to Micro-USB connection cable (60cm/23.62“)
- USB to Mini-DIN connection cable (60cm/23.62“)
- 2 x 2.5mm jack to MIDI cable (160cm/63“)
- 2 x 1.5V AA Battery
Dimensions
- Size: 75mm/2.95" x 127mm/5" x 37mm/1.46“
- Weight: 197.2g/6.96oz (batteries excluded)
- Lightning to Mini-DIN connection cable: 60cm/23.62“
- Micro-USB-OTG to Micro-USB connection cable: 60cm/23.62“
- USB to Mini-DIN connection cable: 60cm/23.62“
- 2.5mm jack to MIDI cable: 160cm/63“
Requirements
iOS Devices
Compatible with iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, iPhone 4s*, iPhone 4*, iPod touch 5th generation, iPod touch 4th generation*, iPad Air 2, iPad mini 3, iPad Air, iPad mini 2, iPad 4th generation, iPad mini, iPad 3rd generation*, iPad 2*, iPad*. iOS 5.1 or later is required.
* 30-pin to Mini-DIN cable (sold separately) is required
Computers
Mac®: Mac OS X 10.6 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8.
Android Devices
Compatible with Android devices that support Samsung Professional Audio technology, like the Samsung Galaxy S6, Galaxy S6 Edge, Galaxy Note 4 and Galaxy Note Edge. Samsung Galaxy S5 and Galaxy Note 3 require Android 5.
Compatible with Android devices with USB (OTG) connector running Android apps that use USB (OTG) audio input.
Compatible with any Android devices with USB (OTG) connector running Android 5. |
The all-in-one audio/MIDI interface that fits in your pocket. The only Interface you need for making music on the go.
Wouldn't it be great to have one compact portable interface for your iPhone, iPad or Mac that you could use to connect your studio mics, your guitar or bass, your keyboards and your MIDI controller, and play, practice and record on the go? Ta Da! Now you can with iRig PRO.
iRig PRO is the first full-featured compact audio and MIDI interface you can use with your XLR microphones, your guitar and bass, your keyboard or other line-level source and your MIDI controllers. It features an XLR/1/4" combo jack for connecting microphones and instruments (accepts XLR and 1/4" TS cables), and a MIDI input for plugging in your favorite controller.
Now when you're on the go, you can record vocals, harmonies, acoustic instruments, electric guitar/bass, keyboards and more without changing your interface and disrupting your creative flow. You will find iRig PRO to be the most versatile iPhone and iPad accessory in your gig bag. And when you get back to your Mac, plug iRig PRO into your USB port and keep jamming away on your laptop or desktop.
Compact
You'll be amazed by the compact design of the unit and what it actually delivers. About the size of a travel tube of toothpaste, iRig PRO fits nicely into small spaces like your gig bag, the accessory compartment of your hardshell case or the side pocket of your cargo shorts. Just don't forget about it and run it through the laundry.
Multiple personalities, universal connectivity
iRig PRO can handle all of your stuff, including XLR condenser mics, guitars and basses, keyboards and other line-level sources, and MIDI controllers. Whatever you're connecting to your device, iRig PRO has you covered. And iRig PRO comes with 3 connector cables: Lightning, 30-pin and USB, to ensure that you've got the right connections.
Specs iRig PRO Specifications - Instrument Input: unbalanced, Hi-Z, TS 1/4” Jack, Tip: signal / Shield: ground
- Maximum Input Level: from 30 mVpp to 6.9 Vpp
- Instrument Input Impedance: 620 kOhms
- Microphone Input: balanced, XLR. Pin 2: hot / Pin 3: cold / Pin 1: ground
- Microphone Input Level: from 6 mVpp to 1.4 Vpp
- Microphone Input Impedance: approx 2 kOhms
- Gain Control Range: 47 dB
- Phantom Power: 48V +/-10%
- Input Noise: -97 dB RMS, -105 dB(A)
- Distortion (THD): 0.01%
- Frequency Response: 20Hz-20kHz +/- 0.5 dB
- Conversion: 24-bit A/D
- Sampling Rate: 44.1 and 48 kHz
- Battery: 9V (Alkaline suggested), needed for +48V phantom only
| Package includes | Dimensions | - iRig PRO universal Audio-MIDI interface
- iOS lightning connection cable
- iOS 30-pin connection cable
- USB connection cable
- 2.5mm jack to MIDI cable
- 9V Battery
| - Size: 32mm/1.26" x 105mm/4.14" x 21mm/0.85"
(W x L x H) - Weight: ~40g/1.41oz
|
Requirements iOS Devices
Compatible with iPhone 5, iPhone 4S, iPhone 4, iPod touch (5th, and 4th generation), iPad 4th generation, iPad 3rd generation, iPad 2, iPad and iPad mini. iOS 5.1 or later is required.
Mac®: Mac OS X 10.5 or later. One free USB port.
Windows®: Support using the ASIO4ALL driver on Windows XP/Vista/7/8. See our FAQ here for further details.
|
Sonic Port™ delivers inspiring guitar tones and best-in-class audio quality on your iPod touch®, iPhone® and iPad®. Jam with the tones of your favorite artists, connect keyboards and speakers to create your mobile recording studio, or plug into your amp and play live. Every time, Sonic Port gives you pro-quality sound with GarageBand®, Line 6 Mobile POD®, Jammit® and other CoreAudio music apps.
The centerpiece of your GarageBand mobile studio
Get the authentic tones of your favorite artists—
or create your own
The only system that lets you jam along with original hit recordings (with the free Jammit app)
Includes detachable Lightning and 30-pin cables
Completely powered by iOS device
World-famous guitarists depend onLine 6 POD multi-effectsfor amazing tone in the studio and on stage. The free Mobile POD app brings these legendary tones to your iOS device. Mobile POD includes over 10,000 presets designed by artists, Line 6 and other players, so you can call up the right tone in an instant.
If you want to go further, you can mix and match 32 amps, 16 stompbox and rack effects, and 16 speaker cabinetsfor an impressive array of sounds. The intuitive interface makes it easy to tweak and save your custom tones. Mobile POD also lets you play along with your iTunes® library* using your custom tones.
Up to 24-bit/48kHz audio quality
110dB dynamic range on guitar input
1/4” guitar input
1/8” stereo line input
1/4” mono-stereo guitar/line-level output
1/8” stereo headphones output
Compatible with GarageBand, Jammit and other CoreAudio music apps
Powered by your iOS device—no additional power supply or batteries needed
Includes detachable 30-pin dock connector cable and Lightning connector cable
|
Apogee ONE makes the legendary quality of Apogee's mic preamps, AD/DA converters and clocking available in a portable form, designed to deliver the purest recordings and best listening experience possible.
Meet ONE The first studio-quality microphone and audio interface for iPad and Mac The all new Apogee ONE is the first studio quality microphone and USB audio interface for iPad and Mac. ONE is designed for easily creating professional and amazing sounding recordings on your iPod touch, iPhone, iPad or Mac. Using Apogeeʼs premium AD/DA conversion, ONE produces pristine music, podcast, and voice-over recordings while also delivering audiophile quality sound to your headphones. Highlights: - First studi+I85o quality audio interface and microphone for iPad - New circuitry, mic capsule and upgraded sound quality - Redesigned die cast aluminum chassis - Direct digital connection to iPod touch, iPhone, iPad - Works with new iPhone 5, iPad (4th generation), iPad mini - (Lighting adapter required - Sold separately) - Works with GarageBand, MultiTrack, Spotify; Any Core Audio compatible app on iOS - Works with GarageBand, Logic, Pro Tools, Ableton, iTunes; Any Core Audio compatible app on Mac - Low latency monitoring, complete input/output control with Apogeeʼs Maestro software (iOS & Mac) - DC power supplies charge to iPod touch, iPhone or iPad - Optional battery operation for remote recording on iPad (2 AA batteries not included) - USB 2.0 audio with 24-bit/96kHz A/D and D/A conversion - Built-in omnidirectional condenser microphone (mic stand adapter included) - 2 Analog Inputs (XLR microphone and 1/4? instrument connector on breakout cable) - Record up to 2 inputs at a time (instrument + internal microphone or external microphone) - 1 1/8? stereo output for headphones or powered speakers - Legendary Apogee sound quality - Designed in California - Made in the U.S.A.
Features/Specifications - Material: Die cast aluminium body, moulded rubber base
- Input 1 options: Built-in microphone, Instrument IN on 1/4“, External microphone - XLR IN on breakout cable
- Input 2 options: Instrument + Built-in microphone, Instrument + External microphone
- Phantom Power: 48V on mic input
- Analog Outputs: 1/8" stereo OUTPUT for headphones or powered speakers
- Level meters: LED
- Mac connection: USB 2.0 High-Speed
- iOS device connection: USB/30-pin dock port, USB lightning connector (sold seperately) (5th gen iPod touch, iPhone 5, 4th gen iPad, iPad mini)
- AD/DA Conversion: 25 bit, up to 96 kHz sample rate
- Compatibility: Mac, iPod touch, iPhone, iPad
- Apogee Maestro control software: Mac, iPod touch, iPhone, iPad
- Built-In Microphone: Condenser/Omnidirectional
- Sound quality: 2nd Gen
- Power: Mac: bus-powered, DC optional, iOS: DC or AA battery power required
- Includes: ONE, Mic stand clip, MAC USB cable, iOS 30-pin cable, breakout cable, universal power supply, QuickStart guide
| The most popular guitar interface of all time just got better
How do you improve upon something so revolutionary that it changed the world? iRig 2 is the answer.
In 2010, for the first time ever, the original iRig allowed guitar and bass players to plug into their iPhone and use their mobile device to play, practice and record with apps like IK's AmpliTube, Appleʼs GarageBand and thousands more.
iRig 2 builds upon the success of its predecessor by introducing essential new features — like adjustable input gain, cross-platform compatibility and a 1/4" amplifier output — that will once again revolutionize the way you make your music while on the go.
Now everyone can plug in their guitar, bass or other instrument and enjoy killer tone on their iPhone, iPad, iPod touch, Mac or Android device — with the release of iRig 2, the worldʼs most popular guitar interface is now better than ever before.
Plug and play simplicity on every device
If you loved iRig's versatility, you'll love iRig 2's new adjustable gain dial, whcih works with its built-in 1/8" TRRS output connector to give you a true plug-and-play experience with your iPhone, iPad, iPod touch, Mac or Samsung Professional Audio compatible Android device.
Volume levels vary from instrument to instrument and from device to device. And while the original iRig provided superior sound, it was limited in that you were unable to customize the input gain level to your particular setup. With iRig 2, you get an input gain dial that gives you the power to ensure high-quality sound in every situation. This means that you'll be able to perform at your best no matter whether you're connecting a wailing 3 humbucker electric guitar to your Samsung Galaxy Note 4 or a jazzy archtop to your iPhone 6.
Likewise, its 1/4” instrument input works with your guitar, bass or any line-level instrument. Just plug into it like you would into a stompbox or amplifier. Itʼs as simple as that.
- The sequel to the best-selling iRig interface
- 1/4” instrument input for use with guitar, bass and other line instruments
- 1/4” amplifier output for use with an external amplifier without an adaptor
- 1/8” TRRS output for use with iPhone, iPad, iPod touch, Mac and Android
- 1/8” headphone output
- Compact and lightweight design
- Selectable dual-mode switch: FX and THRU
- Input gain thumbwheel for easy signal control
- Comes with microphone stand Velcro strip
- Comes with AmpliTube FREE and a full suite of powerful IK applications and software
A digital rig with physical presence
With iRig 2, youʼll be able to enjoy IKʼs full range of AmpliTube apps (the #1 app for guitar players). It's ready to go right out of the box. It comes with a powerful cross-platform suite of apps and software that includes free versions of AmpliTube for iOS, Android and Mac/PC.
To use, just download your preferred version for iOS from the App Store or for Android from the Google Play Store or from Samsung GALAXY Apps. Then plug your guitar or bass into iRig 2, plug your amplifier or headphones into your device and launch the app.
Specs iRig 2 Specifications
- Input Impedance: 380 kOhms
- Frequency Response: 20Hz-20kHz +/- 0.2 dB
- Instrument Input Connection: 1/4" Jack
- Amplifier Output Connection: 1/4" Jack
- Device Output Connection: 1/8" TRRS Jack
- Headphone Output Connection: 1/8" Jack
Package includes
- iRig 2 guitar interface
- Detachable microphone stand Velcro-slot
- Velcro strip
Dimensions
- Size: 72mm/2.83" x 39mm/1.54" x 21mm/0.85“
- Weight: 43g/1.57oz
|
Features
Works on any smartphone or tablet that supports Android 4.2 or higher and host mode/USB OTG
Works on Mac or PC via optional USB to Micro-USB cable.
Near-zero latency digital FX processing
Digital audio recording on Android 5.0 and Samsung Professional Audio Devices as well as Mac and PC
32-bit digital signal processor
24-bit converter with 44.1/48KHz sample rate
High-definition, low-noise preamp
Includes AmpliTube UA
Registration unlocks AmpliTube Metal, 25 Gear Credits for AmpliTube Custom Shop and T-RackS Classic for Mac/PC
Analog aux input for play-along and practice
Headphone output and volume control
Multicolor LED
Ultra-compact and lightweight design
Micro-USB port
|
Reviews
There are no reviews yet.