Content |
| - COVER THE DEMANDS OF VARIOUS SOUND SYSTEM OPERATION IN EVERY VENUES - COMPACT ARRAYS FOR WIDE DISPERSION ANGLES (90°~360°) - HEATPROOF TWEETER BY INSERTING FERRO-FLUID IN THE GAP OF NEODYMIUM MAGNETIC CIRCUIT - 1” P.E.I. TITANIUM COATING DIAPHRAGM & LIGHT CONE PAPER BODY WOOFER WITH FOAMING URETHANE RESIN FOR BETTER SOUND REPRODUCTION. - IMPEDANCE LOUDSPEAKER NETWORKS (CF-60B: 8Ω/166Ω/333Ω/666Ω, CF-120B: 8Ω/83Ω/166Ω/333Ω) | | | | | | Unit | CF-60B/60W | CF-120B/120W | Rated Power | Constant | W | 60 | 120 | Peak | W | 100 | 150 | Frequency Response | Hz | 150~18k | 150~18k | Impedance | Ω | 8, 166, 333, 666 | 8, 83, 166, 333 | SPL (1W/m) | dB | 90 | 90 | HF Drive | Inch | 1 | 1 | LF Drive | Inch | 5 1/4 | 5 1/4 | Cross-Over Frequency | Hz | 2.5k | 2.5k | Dispersion | Angle | 120°(H) | 90°(V) | Weight | kg/lb | 2.7/6 | 3.2/7 | Dimensions (W x H x D) | mm | 226x327x163 | inches | 8.9x12.9x6.4 | ※ Specifications and design subject to change without notice. | | | |
|
PRICE IS PER PIECE AND NOT PER PAIR
- 70 Hz to 23 kHz frequency range (-10 dB)
- 200 watts continuous program power capacity
- 87 dB sensitivity (1W/1m)
- 100° x 100° nominal dispersion
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 8 ohms bypass
- 3 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Video shielded for use near video monitors
- Stainless steel grille for harsh environments
- Zinc-plated screw down input terminal strip
- Available in black or white (Control 25AV-WH)
- Dimensions (HxWxD): 236 mm x 186 mm x 159 mm (9.3 in x 7.4 in x 6.3 in)
- Net Weight: 4.0 kg (9 lb)
|
100V bi-directional Sound Projectors with 2 speakers mounted back to back for projecting the sound in two directions. 3 positions selector for adjusting the sound power. They are recommended for music or speech reproduction. Weather-proof design and suitable for indoor and outdoor use.
Technical Info
Input power: RMS 15W
Output power: 3.75, 7.5, 15W
Speaker: Two 5.5" paper
/plastic cone speaker
Input voltage: 50, 70, 100V
Impedance: 100V-2.66K Ohm / 1.33K Ohm
/ 666 K Ohm 70V-1.33K Ohm
/ 666 Ohm / 326 Ohm
50V-666 Ohm / 326 Ohm / 166 Ohm
Freq. resp.: 150~20kHz
S.P.L: 94 dB (1W/M)
Material: ABS resin
|
- For Shower Room / Pool.
- Low Input BGM / FGM (in compliance with IP-X4).
- Splashproof 360° Rotatable 5W Full-Range Sealed 10cm Speaker for Rainy or High Humidity Areas.
Specification |
| Type | Sealed type | Speaker | 10cm dynamic speaker | Rated Power | 5W
Impedance 2k Ω (5W), 3.3k Ω (3W), 5k Ω (2W) | Output Sound Pressure Leve | 90dB / W / M | Frequency Response | 120 ~ 18,000Hz | Operating Temperature Range | -20 ~ +55°C | Speaker Component | 12cm dynamic cone type speaker | Finish | Enclosure; Polypropylene, Grey / Grill; Aluminium, Grey. | Dimensions | (W x H x D) 198 x 177 x 159mm | Weight | 1.4kg |
|
- 100 Hz to 21 kHz frequency range (-10 dB)
- 50 watts continuous program power capacity
- 5W tap at 70V, 10W tap at 100V
- Nominal maximum output: 89 dB at 70V, 92 dB at 100V
- 3.5 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 193 mm x 140 mm x 111 mm (7.6 in x 5.5 in x 4.4 in)
- Net Weight: 1.8 kg (4 lb)
|
- 55 Hz to 15 kHz frequency range (-10 dB)
- 175 watts continuous program power capacity
- 60W, 30W, 15W, 7.5W taps at 70V
- 60W, 30W, 15W taps at 100V
- 2.8 kHz crossover frequency
- High-Impact Polystyrene (HIPS) enclosure
- Spring-loaded input terminals
- Dimensions (HxWxD): 380 mm x 280 mm x 220 mm (15 in x 11 in x 8.6in)
- Net Weight: 6.3 kg (14 lb)
|
Reviews
There are no reviews yet.