INTER-M PCT-610 Public Address Amplifier

927.47 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
– DIGITAL PROCESSING & DIGITAL AMPLIFIER Designed with full digital amplifier, low power consumption, low set weight and low heat. – BUILT IN SOUND SOURCE You can use the FM digital tuner and MP3CD player which are built in the system for your convenience. – SPEAKER SELECTOR (5 ZONE) Six speaker select switches enable you […]

 

Read more

– DIGITAL PROCESSING & DIGITAL AMPLIFIER

Designed with full digital amplifier, low power consumption, low set weight and low heat.

– BUILT IN SOUND SOURCE

You can use the FM digital tuner and MP3CD player which are built in the system for your convenience.

– SPEAKER SELECTOR (5 ZONE)

Six speaker select switches enable you to select any combination of up to five speakers.

– RS-232C IN/OUT CONTROL

AMX/CRESTRON Interface can be used with the RS-232C terminal

– DIGITAL 3 BAND EQ

Digital 3 band EQ for 6 Mic inputs.

– PRIORITY MUTING

Selectable audio signal priority for MIC Channel 1 and 2.

Priority : EM > TEL-IN > RM > MIC1/2

– ANNOUNCEMENT CHIME

Convenient two-tone and four-tone chime for announcement.

– EM (EMERGENCY)

When the EM terminals are connected in emergencies, EM broadcasting stored in VOICE IC is outputted.

– REMOTE CONTROL

The unit can be used with the remote amplifier, RM-05A.

– IR REMOCON (OPTION)

The unit can be controlled by the remocon.

Power on/off, volume up/down, CD, FM, etc can be controlled by the remocon.

ACCESSORIES

– One detachable AC power cord is provided for use with this product.

– FM Antenna

* 0dBV=1V

PCT-610

PCT-620

AUX INPUT(AUX IN @1kHz, 4Ω Load Output)

Rated Output Power

120W

240W

Input Sensitivity

-10dBV/10kΩ

S/N, AES-17 WTD

≤ -80dB

Tone Control(BASS:100Hz, TREBLE:10kHz)

±10dB

Frequency Response (1W Power Output, ±3dB)

90Hz-18kHz

T.H.D.

MIC 1 ~ 6 Input (MIC IN @1kHz, PRE OUT)

Input Sensitivity

-60dBV ~ -16dBV/10kΩ

S/N, A-WTD

≤ -60dB

Frequency Response (±3dB)

120Hz-10kHz

Phantom Power

+24V DC

Remote IN (Remote IN @1kHz, PRE OUT)

Input Sensitivity

-60dBV/10kΩ

S/N, A-WTD

≤ -50dB

Frequency Response (±3dB)

120Hz-10kHz

TEL IN (TEL IN @1kHz, PRE OUT)

Input Sensitivity

-2.2dBV/10kΩ

S/N, A-WTD

≤ -65dB

Frequency Response (±3dB)

330Hz-3kHz

CD (Test CD 0dB, 1kHz @ PRE OUT)

S/N, A-WTD

Frequency Response (±3dB)

80Hz-18kHz

TUNER (FM, 22.5kHz, MOD @ PRE OUT)

S/N, A-WTD

Frequency Response (±3dB)

100Hz-14kHz

PRE OUT (MIC1~6, AUX IN TEL IN, Remote IN)

Output Level

0dBV/600Ω

T.H.D

POST OUT /Output Level

0dBV/600Ω

Operating Temperature

-10°C ~ +40°C

Power Source

120VAC or 220-240VAC; 50/60Hz, 24VDC**

(Different voltage setting on SMPS depends on country)

Power Consumption(1/8 power)

90W

Weight

10kg/22.7lb

11kg/24.3lb

Dimensions

420(W) x 132(H) x 380(D)mm/16.5(W) x 5.2(H) x 15(D)in

※ Specifications and design subject to change without notice.

※ In case of changing the voltage setting of 120Vac or 220~240Vac on SMPS, MUST refer it to qualified service personnel.

Weight 10.00 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M PCT-610 Public Address Amplifier”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M PCT-610 Public Address Amplifier removeTOA A-1812 MIXER/AMPLIFIER 120W/100V removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTERM PA-2312 Power Amplifier 2 x 120W/100V removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeTOA A-2240 240 Watt Amplifier remove
NameINTER-M PCT-610 Public Address Amplifier removeTOA A-1812 MIXER/AMPLIFIER 120W/100V removeTOA A-1806 MIXER AMPLIFIER 60W/100V removeINTERM PA-2312 Power Amplifier 2 x 120W/100V removeCrown CDI-1000 2x700W-4Ω Power Amplifier removeTOA A-2240 240 Watt Amplifier remove
Image
SKUPCT-610A-1812A-1806PA-2312CDI-1000A-2240
Rating
Price 927.47 incl. GR VAT 438.00 incl. GR VAT 381.99 incl. GR VAT 696.00 incl. GR VAT 1,235.00 incl. GR VAT 583.00 incl. GR VAT
Stock

In stock

Available on backorder

In stock

In stock

Available on backorder

In stock

AvailabilityIn stockAvailable on backorderIn stockIn stockAvailable on backorderIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

- DIGITAL PROCESSING & DIGITAL AMPLIFIER

Designed with full digital amplifier, low power consumption, low set weight and low heat.

- BUILT IN SOUND SOURCE

You can use the FM digital tuner and MP3CD player which are built in the system for your convenience.

- SPEAKER SELECTOR (5 ZONE)

Six speaker select switches enable you to select any combination of up to five speakers.

- RS-232C IN/OUT CONTROL

AMX/CRESTRON Interface can be used with the RS-232C terminal

- DIGITAL 3 BAND EQ

Digital 3 band EQ for 6 Mic inputs.

- PRIORITY MUTING

Selectable audio signal priority for MIC Channel 1 and 2.

Priority : EM > TEL-IN > RM > MIC1/2

- ANNOUNCEMENT CHIME

Convenient two-tone and four-tone chime for announcement.

- EM (EMERGENCY)

When the EM terminals are connected in emergencies, EM broadcasting stored in VOICE IC is outputted.

- REMOTE CONTROL

The unit can be used with the remote amplifier, RM-05A.

- IR REMOCON (OPTION)

The unit can be controlled by the remocon.

Power on/off, volume up/down, CD, FM, etc can be controlled by the remocon.

ACCESSORIES

- One detachable AC power cord is provided for use with this product.

- FM Antenna

* 0dBV=1V

PCT-610

PCT-620

AUX INPUT(AUX IN @1kHz, 4Ω Load Output)

Rated Output Power

120W

240W

Input Sensitivity

-10dBV/10kΩ

S/N, AES-17 WTD

≤ -80dB

Tone Control(BASS:100Hz, TREBLE:10kHz)

±10dB

Frequency Response (1W Power Output, ±3dB)

90Hz-18kHz

T.H.D.

MIC 1 ~ 6 Input (MIC IN @1kHz, PRE OUT)

Input Sensitivity

-60dBV ~ -16dBV/10kΩ

S/N, A-WTD

≤ -60dB

Frequency Response (±3dB)

120Hz-10kHz

Phantom Power

+24V DC

Remote IN (Remote IN @1kHz, PRE OUT)

Input Sensitivity

-60dBV/10kΩ

S/N, A-WTD

≤ -50dB

Frequency Response (±3dB)

120Hz-10kHz

TEL IN (TEL IN @1kHz, PRE OUT)

Input Sensitivity

-2.2dBV/10kΩ

S/N, A-WTD

≤ -65dB

Frequency Response (±3dB)

330Hz-3kHz

CD (Test CD 0dB, 1kHz @ PRE OUT)

S/N, A-WTD

Frequency Response (±3dB)

80Hz-18kHz

TUNER (FM, 22.5kHz, MOD @ PRE OUT)

S/N, A-WTD

Frequency Response (±3dB)

100Hz-14kHz

PRE OUT (MIC1~6, AUX IN TEL IN, Remote IN)

Output Level

0dBV/600Ω

T.H.D

POST OUT /Output Level

0dBV/600Ω

Operating Temperature

-10°C ~ +40°C

Power Source

120VAC or 220-240VAC; 50/60Hz, 24VDC**

(Different voltage setting on SMPS depends on country)

Power Consumption(1/8 power)

90W

Weight

10kg/22.7lb

11kg/24.3lb

Dimensions

420(W) x 132(H) x 380(D)mm/16.5(W) x 5.2(H) x 15(D)in

※ Specifications and design subject to change without notice.

※ In case of changing the voltage setting of 120Vac or 220~240Vac on SMPS, MUST refer it to qualified service personnel.

Multi-purpose, multi-function mixer/power amplifiers specifically designed for maximum versatility and cost-effective high-performance are ideal units for any PA requirement in locations such as schools and offices and other intermediate size environments. A choice of different power outputs are offered as well as functions such as paging and dual zone coverage.

Specification
Power Source AC mains 50/60Hz, or 24V DC (M4 screw terminal)
Output 120W
Power Consumption AC operation: 158W (rated output), 66W (EN60065)
24V DC operation: 7.0A (rated output), 2.8A (EN60065)
Frequency Response 50 - 20,000Hz ±3dB
Distortion Under 2% at 1kHz, rated power
Input MIC 1: -60dB*, 600Ω, electronically-balanced, combined type of XLR-3-31 equivalent and phone jack DIN socket (5 pins)
MIC 2, 3: -60dB(*1), 600Ω, electronically-balanced, combined type of XLR-3-31 Equivalent and phone jack
AUX 1(MOH): -20dB*, 10kΩ, unbalanced RCA pin jack
AUX 2: -20dB(*1), 10kΩ, unbalanced, RCA pin jack
AUX 3: -20dB(*1), 10kΩ, unbalanced, RCA pin jack combined type of XLR-3-31 and phone jack
TEL(*2): -20dB*1, 10kΩ, electronically-balanced, M3 screw terminal
Output REC: 0dB(*1), 600Ω, unbalanced, RCA pin jack
LINE 1,2(*3): 0dB(*1), 600Ω, unbalanced, RCA pin jack
MOH: 0dB(*1), 600Ω transformer balanced, M3 screw terminal
SPEAKER SELECTOR:
2 zone, high impedance (100V line/83Ω), individual selector switch, M4 screw terminal
DIRECT SPEAKER OUT:
High impedance (100V line/83Ω),M4 screw terminal
Low impedance (4 - 16Ω), M4 screw terminal(Both Low and High impedance terminals cannot be used at the same time.)
Phantom Power ON or OFF for each MIC 1 - 3 with switch setting
S/N ratio
(Band Pass: 20 - 20,000Hz)
Over 100dB (Master volume: min)
Over 76dB (Master volume: max)
Over 60dB (MIC 1 - 3))
Over 76dB (AUX 1 - 3)
Over 90dB (TEL)
Over 96dB (EMERGENCY)
Control Input Bass: ±10dB at 100Hz, Treble: ±10dB at 10kHz
TEL: No-voltage make contact input, open voltage: 24V DC, short-circuit: under 5mA, M3 screw terminal
EMERGENCY (*4): No-voltage make contact input, open voltage: 24V DC, short-circuit: under 10mA, M3 screw terminal
Control Output Power remote: Open collector output, withstand voltage: 35V DC, control current: under 50mA, M3 screw terminal
Indicator 5 point LED output level meter, Power indicator LED, Zone indicator LED, Emergency LED, TEL LED
Priority EMERGENCY: Overrides other inputs
TEL: Overrides other inputs except "EMERGENCY”, ON/OFF selectable with switch setting
MIC 1: Overrides other inputs except "EMERGENCY & TEL”, ON/OFF selectable with switch setting
Operating Temperature -10ºC - +40ºC
Finish Panel: ABS resin, black, hair line
Case: Steel plate, black
Dimensions 420 (W) x 107.7 (H) x 367 (D)mm
Weight 12.6kg
Accessory Power cord x 1,
Terminal block cover x 1,
Terminal block cover mounting screw x 2
Option Rack mounting bracket: MB-25B,
Volume control cover: YA-920,
Input transformer: IT-453A
Note* (*1) 0dB = 1V
(*2) Can be transformer-balanced with the addition of optional IT-453A input transformer.
(*3) LINE 1 and LINE 2 outputs can be interlocked with ZONE 1 and ZONE 2 speaker selectors, respectively. (This function needs internal modification.)
(*4)Operation when activated can be selected from the following: Turning ON the unit\'s power (factory-preset) or OFF. (The OFF function needs internal modification.)

Toa A1806 powered mixer is a basic mono/2 zones 60 Watts (100V) PA amplifier with 3 mic channels suited for broadcasting, paging or background music in schools, offices or shops.

 
Weight (KG) 9.4
Size (mm) 420 x 107.7 x 367
Colour Black
Manufacturer warranty (UK) 1 year RTB

- HIGH POWER, LOW DISTORTION

120W of RMS power with less than 1% THD.

 

- ADVANCED PROTECTION CIRCUITRY

Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.

 

- BATTERY BACKUP

Can be powered by 24VDC battery for emergency backup and true portability.

 

- SLIM DESIGN, COMPACT SIZE

Streamlined design fits in a compact 3RU space.

 

PA- 2312

Rated Output (RMS, THD 1%, 1kHz)

120W

Input Sensitivity/Impedance

1V/10kΩ, Balanced

T.H.D

Less than 1%

S/N

Better than 95dB

High Pass Filter

-3dB at 400Hz

Channel Separation

Less than –70dB

Output Voltage/Impedance

EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V

USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V

Power Source

100–120VAC or 220–240VAC; 50/60Hz, 24VDC

Power Consumption(1/8 Power)

290W

Weight

20Kg/44.1Ib

Dimensions

482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in

 

 

Crown CDi 1000 2x700W-4Ω Power Amplifier

The Crown? CDi 1000 power amplifi er shall be a solid-state two-channel model
with a switch-mode universal power supply.
The outputs shall be usable as dual or bridged-mono modes of operation.
The bridged-mono mode shall bridge the outputs to provide increased output
voltage.
Front panel controls and indicators shall include the following:
Level: Detented rotary level control, one per channel.
Power Switch: On/off switch applies AC power to the amplifi er.
Sel/Prev/Next Buttons: Three buttons near the LCD screen shall be used to
access menu items and front panel lockout.
LCD Screen: Backlit liquid crystal display shows speaker presets and signal
processing.
Signal Indicator: Green LED, one per channel, illuminates when a very low-level
signal is present at input.
?10 Indicator: Green LED fl ashes when output signal exceeds ?10 dB below
clip.
?20 Indicator: Green LED fl ashes when output signal level exceeds ?20 dB
below clip.
Ready Indicator: Green LED, one per channel, illuminates when the amplifi er is
ready to produce audio.
Clip Indicator: Red LED, one per channel, turns on at the threshold of audible
distortion.
Temp Indicator: Red LED, one per channel, illuminates under excessive temperature
conditions.
Power Indicator: Blue LED illuminates when the amplifi er has been turned on
and has power.
Rear panel controls and connectors shall include the following:
AC Line Connector: NEMA 5-15P (15A).
Input Connector: Two 3-pin removable Phoenix-type connectors each accept a
balanced line-level input signal.
Output Connectors: 4-position barrier strip with connectors for dual louspeakers
or bridge-mono loudspeaker. Dual connectors shall work with 2-8 ohm or
70V loads. Bridge-mono connectors shall work with 4-8 ohm or 140V loads.
HiQnet USB Connector: Type B, connects to a USB port on a PC.
The amplifi er shall have the following specifi cations:
Output Power: 2 ohm Dual (per channel): 700W with 1% THD, 4 ohm Dual (per
channel): 500W, 8 ohm Dual (per channel) 275W, 4 ohm Bridge-Mono: 1,400W
with 1% THD, 8 ohm Bridge-Mono: 1,000W, 70V Dual (per channel): 500W.
Voltage Gain at 1kHz, 8 ohm rated output: 30.5 dB.
Frequency Response: +0/?1 dB from 20 Hz to 20 kHz at 1 watt into 4 ohms.
Load Impedance: Safe with all types of loads. Rated for 2 to 8 ohms in Stereo
mode, 4 to 16 ohms in Bridge-Mono mode.
Sensitivity: 1.4V.
Signal to Noise Ratio (below rated 8-ohm power at 1 kHz): 100 dB
(A weighted).
Damping Factor: Better than 500 from 20 Hz to 400 Hz.
Crosstalk: > 70 dB below rated power, 20 Hz to 1 kHz.
Input Stage: Input is electronically balanced and employs precision 1% resistors.
Input Impedance (nominal): 20 k ohms, balanced;10 k ohms, unbalanced.
Maximum Input Signal: +22 dBu typical.
AC Line Voltage and Frequency Confi gurations Available: 100V, 120V, 220-240V,
50/60 Hz.
AC Line Current: 6.5A.
At Idle: Draws no more than 90 watts.
Operating Temperature: 0° C to 40° C at 95% relative humidity (non-condensing).
The DSP section shall have the following specifi cations:
Input EQ: 6 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
Also adjustable high and low shelving fi lters. This 8-fi lter EQ section can be
bypassed.
Crossover Filters: Highpass and lowpass per channel. Butterworth 6/12/18/24
dB per octave and Linkwitz-Riley 24/48 dB per octave. Also includes ±15 dB
bandpass gain and polarity control.
Output EQ: 8 parametric fi lters per channel with adjustable Q, ±15 dB boost/cut.
This 8-fi lter EQ section can NOT be bypassed. Filters are enabled individually.
Delay: Up to 50 msec total delay per channel.
Output Limiter: Prevents clipping and protects loudspeakers. Choice of ?3, ?6,
or ?12 dB threshold per channel.
Presets: 20 presets. 19 are user-definable.
Protection shall include the following:
CDi-Series amplifi ers shall be protected against shorted, open or mismatched
loads; overloaded power supplies; excessive temperature; chain destruction
phenomena; excessive output current, and input overload damage. They also
protect loudspeakers from input/output DC, large or dangerous DC offsets and
turn-on/turn-off transients
The chassis shall be steel. Cooling shall be by a proportional speed fan with
front-to-rear airfl ow.
Dimensions shall be EIA Standard 19-in. rack mount width (EIA RS-310-B), 3.5
in. (8.9 cm) high and 12.25 in. (31.11 cm) deep behind mounting surface.
Net weight shall be 19 lb (8.6 kg). Shipping weight shall be 22 lb (10.0 kg).
The amplifier shall be designated the Crown CDi 1000.

High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.

Specification
Power Source 220 - 240V AC or 24V DC
Rated Output 240W
Power Consumption 238W (EN60065), 520W(AC operation at rated output, 15A (DC operation at rated output)
Frequency Response 50 - 20,000Hz (+/- 3 dB)
Distortion Under 1% at 1kHz,1/3 rated power
Input MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1)
Output SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:42W (100V)
LOW IMPEDANCE: 4Ω (31V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack
Phnatom Powe DC + 21V (MIC 1)
S/N Ratio Over 60dB
Tone Control Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz
Muting MIC1: Mutes other signals by 0 - 30 dB attenuation
Indicator Power signal, peak
Finish Panel: ABS resin, black/Case: Steel plate, black
Dimensions 420 (W) x 100.9 (H) x 360.3 (D) mm
Weight 13kg

 

Weight10.00 kg12.60 kg9.40 kg20.00 kg10.00 kg13.00 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 10.00 kg
Weight 12.60 kg
Weight 9.40 kg
Weight 20.00 kg
Weight 10.00 kg
Weight 13.00 kg