| Content |
| | - DIGITAL PROCESSING & DIGITAL AMPLIFIER Designed with full digital amplifier, low power consumption, low set weight and low heat. - BUILT IN SOUND SOURCE You can use the FM digital tuner and MP3CD player which are built in the system for your convenience. - SPEAKER SELECTOR (5 ZONE) Six speaker select switches enable you to select any combination of up to five speakers. - RS-232C IN/OUT CONTROL AMX/CRESTRON Interface can be used with the RS-232C terminal - DIGITAL 3 BAND EQ Digital 3 band EQ for 6 Mic inputs. - PRIORITY MUTING Selectable audio signal priority for MIC Channel 1 and 2. Priority : EM > TEL-IN > RM > MIC1/2 - ANNOUNCEMENT CHIME Convenient two-tone and four-tone chime for announcement. - EM (EMERGENCY) When the EM terminals are connected in emergencies, EM broadcasting stored in VOICE IC is outputted. - REMOTE CONTROL The unit can be used with the remote amplifier, RM-05A. - IR REMOCON (OPTION) The unit can be controlled by the remocon. Power on/off, volume up/down, CD, FM, etc can be controlled by the remocon. ACCESSORIES - One detachable AC power cord is provided for use with this product. - FM Antenna | | | | | | * 0dBV=1V | | | PCT-610 | PCT-620 | | AUX INPUT(AUX IN @1kHz, 4Ω Load Output) | | Rated Output Power | 120W | 240W | | Input Sensitivity | -10dBV/10kΩ | | S/N, AES-17 WTD | ≤ -80dB | | Tone Control(BASS:100Hz, TREBLE:10kHz) | ±10dB | | Frequency Response (1W Power Output, ±3dB) | 90Hz-18kHz | | T.H.D. | | | MIC 1 ~ 6 Input (MIC IN @1kHz, PRE OUT) | | Input Sensitivity | -60dBV ~ -16dBV/10kΩ | | S/N, A-WTD | ≤ -60dB | | Frequency Response (±3dB) | 120Hz-10kHz | | Phantom Power | +24V DC | | Remote IN (Remote IN @1kHz, PRE OUT) | | Input Sensitivity | -60dBV/10kΩ | | S/N, A-WTD | ≤ -50dB | | Frequency Response (±3dB) | 120Hz-10kHz | | TEL IN (TEL IN @1kHz, PRE OUT) | | Input Sensitivity | -2.2dBV/10kΩ | | S/N, A-WTD | ≤ -65dB | | Frequency Response (±3dB) | 330Hz-3kHz | | CD (Test CD 0dB, 1kHz @ PRE OUT) | | S/N, A-WTD | | | Frequency Response (±3dB) | 80Hz-18kHz | | TUNER (FM, 22.5kHz, MOD @ PRE OUT) | | S/N, A-WTD | | | Frequency Response (±3dB) | 100Hz-14kHz | | PRE OUT (MIC1~6, AUX IN TEL IN, Remote IN) | | Output Level | 0dBV/600Ω | | T.H.D | | | POST OUT /Output Level | 0dBV/600Ω | | Operating Temperature | -10°C ~ +40°C | | Power Source | 120VAC or 220-240VAC; 50/60Hz, 24VDC** (Different voltage setting on SMPS depends on country) | | Power Consumption(1/8 power) | 90W | | Weight | 10kg/22.7lb | 11kg/24.3lb | | Dimensions | 420(W) x 132(H) x 380(D)mm/16.5(W) x 5.2(H) x 15(D)in | | ※ Specifications and design subject to change without notice. ※ In case of changing the voltage setting of 120Vac or 220~240Vac on SMPS, MUST refer it to qualified service personnel. | | | |
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with the VP-2064, VP-2122, VP-2241 or VP-2421 power amplifier.
| Power Source | Supplied from VP-2064, VP-2122, VP-2241 or VP-2421 | | Current Consumption | 30 mA or less | | Power Amplifier Link | RJ45 female connector for connecting the VX-200SP,
VX-200SZ Audio Output module, or SX-2100AO.
Twisted-pair straight cable (TIA/EIA-568A standard) | | Finish | Panel: Surface-treated steel plate | | Dimensions | 88 (W) × 25.8 (H) × 53.2 (D) mm | | Weight | 50 g | | Applicable Model | VP-2064, VP-2122, VP-2241, VP-2421 |
|
- HIGH POWER, LOW DISTORTION
120W of RMS power with less than 1% THD.
- ADVANCED PROTECTION CIRCUITRY
Thermal and current overload protection, power-on delay and automatic idling circuitry for component and loudspeaker protection.
- BATTERY BACKUP
Can be powered by 24VDC battery for emergency backup and true portability.
- SLIM DESIGN, COMPACT SIZE
Streamlined design fits in a compact 3RU space.
|
PA- 2312
|
|
Rated Output (RMS, THD 1%, 1kHz)
|
120W
|
|
Input Sensitivity/Impedance
|
1V/10kΩ, Balanced
|
|
T.H.D
|
Less than 1%
|
|
S/N
|
Better than 95dB
|
|
High Pass Filter
|
-3dB at 400Hz
|
|
Channel Separation
|
Less than –70dB
|
|
Output Voltage/Impedance
|
EC, JAPAN: 4Ω/22V, 41Ω/70V, 83Ω/100V
|
USA/CANADA: 4Ω/22V, 5.2Ω/25V, 41Ω/70V
|
|
Power Source
|
100–120VAC or 220–240VAC; 50/60Hz, 24VDC
|
|
Power Consumption(1/8 Power)
|
290W
|
|
Weight
|
20Kg/44.1Ib
|
|
Dimensions
|
482(W) x 132(H) x 280(D)mm/19(W) x 5.2(H) x 11(H)in
|
|
High cost-performance
Suitable for commercial audio systems in schools,
offices, shops, restaurants, factories, houses of worship, and large meeting rooms.
Equipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Improved durability compared with conventional
TOA models.
Flexibility
A wide range of power outputs from 30W to 240W
Offers a comfortable acoustic space thanks to tone
control at bass and treble.
Both AC and DC operation possible
Phantom power provided to MIC1, for supplying
power to a condenser microphone.
Easy to handle
Scratch and fingerprint-resistant finish•Easy and quick volume control with master volume control.
| Specification |
|
|---|
| Power Source | 220 - 240V AC or 24V DC | | Rated Output | 30W | | Power Consumption | 34W (EN60065), 78W(AC operation at rated output, 2A (DC operation at rated output) | | Frequency Response | 50 - 20,000Hz (+/- 3 dB) | | Distortion | Under 1% at 1kHz,1/3 rated power | | Input | MIC 1: -60db 600Ω,electronically balanced, 5-P Din type. MIC 2,3:-60db 600Ω,electronically balanced, 5-P phone jack. AUX 1,2: -20dB, 10kΩ, unblanced, RCA pin jack. Mute: Contact Pin 4 - 5 Closure input (for MIC 1) | | Output | SPEAKER OUT:Balanced (floating)
HIGH IMPEDANCE:330W (100V)
LOW IMPEDANCE: 4Ω (11V)
REC. OUT: Odb, 600Ω unbalanced, RCA pin jack | | Phnatom Powe | DC + 21V (MIC 1) | | S/N Ratio | Over 60dB | | Tone Control | Bass: +/- 10 dB at 100k Hz Treble: +/- 10 dB at 10k Hz | | Muting | MIC1: Mutes other signals by 0 - 30 dB attenuation | | Indicator | Power signal, peak | | Finish | Panel: ABS resin, black/Case: Steel plate, black | | Dimensions | 420 (W) x 100.9 (H) x 280.2 (D) mm | | Weight | 5kg |
|
The VP-200VX Power Amplifier Input Module is designed to be used in conjunction with theVP-2064, VP-2122, VP-2241 or VP-2421 power amplifier. |
XB Series - Intelligent Power
Power Without Compromises.
The XV is designed for paging, music and alarm signals. Versatile, dynamic and
extremely rugged according to IEC286-3. For the highest requirements in safety
and quality.
Sequential power on, alive contacts and incorporated ground fault detection -
the XV is the solution under all conditions. Without the need for additional equipment.
For uninterrupted and troublefree operation.
Needless to say that the Bittner High-End toroidal output transformers in the XV
series are some of the best available.
High Tech SMT Design
Protection Circuits: DC, LF, HF, Thermal, Short Circuit, Current Limiter, 3 ms Muting Delay
PHOENIX
High-End Toroidal Output 100V Transformers
Ground Fault Detection
LED Indicators for POWER, SIGNAL, CLIP, PROTECT, GNDFAULT
Temperature controlled, variable speed low noise fans
Volume Controls at the back
Stereo / Bridged / Parallel Mode
Softstart
Sequential Remote Power On
Alive Contact
Ground Lift
3 Years Warranty
TECHNICAL DATA:
XV 400: 2x 200 W / 100 V
Class: AB
Frequency Response: 20 Hz - 20 kHz (0 / -0.3 dB)
THD: < 0.07%
Signal-to-Noise Ratio: < 101 dB
Channel Seperation: > 70 dB
Input Sensitivity: +6 dBu
Input Clipping: 22 dBu
Input Impedance: 20 kOhm
Cooling: 2 to 3 fans (temp. reg. variable speed)
Weight: 17 kg
Dimensions: 2 RU / 483 x 88 x 382 mm (19" x 3.5" x 15“) |
Reviews
There are no reviews yet.