Content |
| - 9 CHANNEL INPUT, 1 CHANNEL FOR MASTER OUTPUT, 2 CHANNEL FOR SUB OUTPUT, 1 CHANNEL FOR RECORDING OUTPUT 9 channel input and 1 channel for master output and 2 sub channel for flexible use and 1 channel for recording output which is not affected by the master level fader built in. - AUXILIARY INPUT AND PRIORITY INPUT Auxiliary Input is built in so that users can use the external sound source in there convenience and the sound source connected to 2 channels of this priority input is played prior to the other input. - EQ ON EACH CHANNEL 3 band (High, Mid, Low) Graphic equalizers are built-in so that a user can adjust the tone of sound to there taste. - PHANTOM POWER Phantom powers are available on channel 1 and 2 for the condenser microphone. - DUCKING Ducking function available on channel 1 and 2 enable their sound source to be broadcast prior to the others. A user can select whether to use it or not. | | | | | PP-613 | Rated Output (1kHz) | Master Output | +4dBm/600Ω, BAL | SUB 1,2 Output | +4dBm/600Ω, UNBAL | REC Output | +10dBm/10KΩ, UNBAL | Input Sensitivity /Impedance | MIC (CH1~CH9) | -60dBm/600Ω, BAL | LINE(CH1~CH6) | -20dBm/47kΩ, BAL | LINE(CH7~CH9) | -20dBm/47kΩ, UNBAL | AUX 1,2 | 10dBm/20kΩ, UNBAL | Priority 1,2 | 0dBm/20kΩ, UNBAL | Insert | 0dBm/20kΩ, UNBAL | T.H.D | Less than 0.3% | Frequency Response | 30Hz-20kHz (+1dB,-3dB) | Input Channel Equalizer | HIGH | ±12dB (10kHz) | MID | ±12dB (1kHz) | LOW | ±12dB (100kHz) | Output Channel Equalizer | HIGH | ±12dB (10kHz) | HI-MID | ±12dB (2kHz) | LOW-MID | ±12dB (400kHz) | LOW | ±12dB (80kHz) | Residual Noise (at V/R min) | Less than -90dB | Crosstalk | Less than -50dB | Phantom Power | +18V DC | Operation Temperature | -10℃~+40℃ | Power Source | 100-120VAC or 220-240VAC; 50/60Hz (Supplied AC mains transformer depends on country requirements) | Power Consumption | 10W | Weight(SET) | 5.5Kg/21.1Ib | Dimension(SET) | 482(W) x 88(H) x 380(D)mm/19(W) x 3.5(H) x 15(D)in | ※ Specifications and design subject to change without notice. | | | |
|
This model should be used with concerning equipment (emergency switcher-our model ES-9116, matrix-our model PX-9116, emergency panel-our model EP-9216). Specification Brand | InterM | Model | RG-9116 | Features | Speaker line switching; broadcasting status indicators (LED). | Power supply | 24V DC | Dimensions | 482 x 44 x 280 mm | Weight | 3,8 kg | Warranty | 12 months |
|
The AT series high quality attenuators features 5 attenuation settings ,,OFF'' -18dB,-12db,-6dB,-0dB. An input range from 0.5W to 60W (model dependent), and push-in connectors. Push-in connector allows quick terminal cable connection. Stylishly finished, the AT Series will suit any décor. |
The JBL MTC-300T150 150 Watt Transformer is intended for use with 70V or 100V distributed loudspeaker lines. It is ideally suited for the Control Series 300, especially the 300BB12 Backbox which includes a preinstalled mounting location. |
Music Program Selector 1-6 with Relay
Toa - 100V installation |
RM-200M - Five/ten zone console for VM-2120/2240 amplfiers
The RM-200M Remote Microphone that allows announcements to be made to any speaker zone and emergency announcements to all zones on a system with the VM-2120/2240 system management amplifiers.
These announcements can be made live or pre-recorded announcements
can be activated. The remote microphone is connected by cable to the
RM-210 Remote Microphone Extension unit.
SPECIFICATIONS:
Power Requirement | 24 V DC (12-30 V DC), (Supplied from VM-2120/VM-2240 Amplifier or local power suppy.) | Distortion | Less than 1% | Frequency Response | 100 - 10,000 Hz | Distortion | Less than 1% | Signal-to-Noise Ratio | More than 60 dB | Audio Output | 0 dB*1, 600 O, balanced | Microphone | Unidirectional electret condenser microphone, gooseneck type. | Speaker Zone Control | Zones 1-5 (Zones 1-10 with 2 stacked amplifiers) Groups 1-2, and All-Zone Broadcast | Emergency Broadcast | Activation of Emergency Broadcast (pre-recorded announcement*2 or live microphone announcement) by Emergency Switch | Voice Announcement Board Control | Activation of 5 messages*2 | Number of Connectable Units | Up to 4 | Communication System | RS-485 | Volume Control | Microphone volume control | Connection Cable and Connector Category | 5 STP cable, RJ45 connector | Communication Distance | 800 m maximum in total | Finish | ABS resin | Dimensions | 190 (W) × 75.7 (H) × 21.5 (D) mm (Gooseneck microphone excluded) |
| *1 0 dB = 1 V
*2 An optional EV-200 Board must be mounted in the VM-2120 or VM-2240 Amplifier. |
|
Reviews
There are no reviews yet.