INTER-M RM-05A 5 ZONE PAGING MICROPHONE

120.21 incl. GR VAT

In stock

EAN: N/A
Installments calculation
CompareAdd to wishlist Submit Better Price
Availability: Available in 1-3 d. Available in 1-3 d. SKU: RM-05A Category:
Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: […]

 

Read more

Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.

Weight 1.20 kg

Reviews

There are no reviews yet.

Be the first to review “INTER-M RM-05A 5 ZONE PAGING MICROPHONE”

Your email address will not be published. Required fields are marked *

Quick Comparison

INTER-M RM-05A 5 ZONE PAGING MICROPHONE removeRCF BM 3014 Paging Microphone removeMASTER AUDIO CM238 Condenser Microphone Gun Cardioid removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeShure MX202B/C Microflex Overhead Microphones removeSHURE SM 58SE - Vocal Microphone with on-off 50Hz to 15kHz remove
NameINTER-M RM-05A 5 ZONE PAGING MICROPHONE removeRCF BM 3014 Paging Microphone removeMASTER AUDIO CM238 Condenser Microphone Gun Cardioid removeSHURE BETA 52A - Kick Drum Microphone 20Hz to 10kHz removeShure MX202B/C Microflex Overhead Microphones removeSHURE SM 58SE - Vocal Microphone with on-off 50Hz to 15kHz remove
ImageCM238-master audio microphone condenser artsound
SKURM-05A14320135CM238BETA 52AMX202B/CSM58S
Rating
Price 120.21 incl. GR VAT133.90 incl. GR VAT 42.15 incl. GR VAT 231.36 incl. GR VAT 333.12 incl. GR VAT 149.75 incl. GR VAT
Stock

In stock

In stock

Only 2 left in stock (can be backordered)

Only 1 left in stock (can be backordered)

In stock

In stock

AvailabilityIn stockIn stockOnly 2 left in stock (can be backordered)Only 1 left in stock (can be backordered)In stockIn stock
Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Add to cart

Description
Content

Designed to operate exclusively with the PAM-340A the RM-05A will allow either individual selection of any combination of paging zones or the all-all facility. A flexible gooseneck microphone is supplied together with a three metre lead, complete with multiway connectors to connect the RM-05A to the host amplifier. Power: Supplied by the host PAM-340A. Dimensions: 195mm(w) x 60mm(h) x 205mm(d). Weight: 1.2 kg including microphone.

Unidirectional cardoid-pattern microphone with high sensitivity and extended frequency response. 
Factory-fitted for direct connection to the AM4000 series, PR4092, EL2126 CD sintoamplifier and 1000 series amplifiers.

General Specs

  • Plastic body with 320 mm gooseneck
  • Pushbutton for momentary microphone activation
  • Connections on screw terminals inside

Specifications

  • Type:Desktop paging microphone with dinamyc capsule
  • Directivity:Unidirectional - Cardioid
  • Frequency Response:100Hz ÷ 12 kHz
  • Microphone Sensitivity:- 71 dB ± 3
  • Output impedance:500Ω
  • Signal/noise ratio:40dB
  • Connector:3 pole XLR

Size/Weight

  • Height:270 / 10.62mm/inch
  • Width:200 / 7.87mm/inch
  • Depth:132 / 5.20mm/inch
  • Net Weight:6 / 3.53kg/lbs
MASTER AUDIO – CM238 Pen-type microphone
  • Directivity: condenser – ultra cardioid
  • Frequency response.: 100Hz – 16Khz
  • Sensitivity: -44db +/- 2db for short distance – -23db +/- 2db for long distance
  • Output impedance: 1K Ohm for short distance – 2.3K Ohm for long distance
  • Power supply: 1.5V / phanthom 48V
  • Dimensions: Ø 23 x 360 mm.
  • Windscreen, microphone holder and cable (4,5 m.) included
Optimized for low-frequency bass punch/high-power SPL handling. Designed for kick drum. The Shure BETA®52A is a high output dynamic microphone with a tailored frequency response designed specifically for kick drums and other bass instruments. It provides superb attack and "punch“, and delivers studio quality sound even at extremely high sound pressure levels. The Beta 52A features a modified supercardioid pattern throughout its frequency range to insure high gain-before-feedback and excellent rejection of unwanted sound. A built in dynamic locking stand adapter with an integral XLR connector simplifies installation, particularly if the microphone is to be placed inside a kick drum. The stand adapter keeps the microphone position fixed and resists slipping, even when subjected to sharp blows and strong vibrations. A hardened steel mesh grille protects the Beta 52A from the abuse and wear associated with touring. Features
  • Frequency response shaped specifically for kick drums and bass instruments
  • Built–in dynamic locking stand adapter with integral XLR connector simplifies setup, especially inside a kick drum
  • Studio quality performance, even at extremely high sound pressure levels
  • Supercardioid pattern for high gain before feedback and superior rejection of unwanted noise
  • Hardened steel mesh grille that resists wear and abuse
  • Advanced pneumatic shock mount system that minimizes transmission of mechanical noise and vibration
  • Neodymium magnet for high signal–to–noise ratio output
  • Low sensitivity to varying load impedance
  • Legendary Shure quality and reliability
Type Dynamic (moving coil)
Frequency Response 20 to 10,000 Hz
Polar Pattern Supercardioid, rotationally symmetrical about microphone axis
Output Level Open Circuit Voltage: -64 dBV/Pa* (0.6 mV), *1 Pa = 94 dB SPL

Shure MX202B-C Microflex Overhead Cardioid Condencer Microphone

It is hard to believe that such small, unobtrusive microphones can produce such great sound,
but it's true. Available in black or white finishes, and with in line or plate mount preamps, the
Microflex? Overhead condenser microphones capture Shure quality sound in a compact, adjustable
package. Each model features a choice of interchangeable cardioid, supercardioid and omnidirectional
condenser microphone cartridges attached to a flexible, four inch gooseneck with a 30 foot cable.
The preamp options available offer easy installation in ceilings or microphone stands, and when combined
with the high sensitivity cartridge's wide frequency response, these microphones provide accurate sound
reproduction with a minimum of RF interference or electromagnetic hum.

Features:

Wide dynamic range and frequency response for accurate sound reproduction across the audio spectrum
Interchangeable cartridges that provide an optimal polar pattern choice for each application
Balanced, transformerless output for increased immunity to noise over long cable runs
Supplied stand-mount adapter for portable applications (in-line preamplifier versions only)
White or black finish that blends unobtrusively with most surroundings

Frequency Response
50 to 17,000 Hz
Output Impedance
180 ohms actual (EIA rated at 150 ohms)
Sensitivity (At 1,000 Hz, open circuit voltage*)
Cardioid: -35.0 dBV/Pa (17.8 mV)
Supercardioid: -33.5 dBV/Pa (21.1 mV)
Omnidirectional: -27.5 dBV/Pa (42.2 mV)
All values -12 dB at 0 gain; *1 Pascal = 94 dB SPL
Maximum SPL (1 kHz at 1% THD, 1 k ohm load)
Cardioid: 124.2 dB
Supercardioid: 122.7 dB
Omnidirectional: 116.7 dB
All values +6 dB at 0 gain
Equivalent Output Noise (A-weighted)
Cardioid: 28.0 dB SPL
Supercardioid: 26.5 dB SPL
Omnidirectional: 20.5 dB SPL
Signal to Noise Ratio (referenced at 94 dB SPL)
Cardioid: 66.0 dB
Supercardioid: 67.5 dB
Omnidirectional: 73.5 dB
Dynamic Range at 1 k ohm load
96.2 dB
100 dB at 0 gain
Common Mode Rejection
45.0 dB minimum
Preamplifier Output Clipping Level (1% THD)
-6.0 dBV (0.5 V)
-12 dBV at 0 gain
Polarity
Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output connector.
Power Requirements
11 to 52 Vdc phantom, 2.0 mA
Environmental Requirements
Operating Temperature Range: -18 to 57 degrees C (0 to 135 degrees F)
Relative Humidity: 0 to 95%
The Shure SM58S Vocal Microphone features a cardioid dynamic vocal design well suited for professional vocal use in live performances, sound reinforcement, and studio recording. A built-in spherical filter minimizes wind and breath "pop" noise, while the cardioid pickup pattern isolates the main sound source while minimizing unwanted background noise. The microphone offers durable construction, a high-quality internal shockmount system, and a steel mesh grille for withstanding rough handling. The SM58S is designed to perform consistently both outdoors and indoors and when used for singing or speech applications. The microphone features an integrated on/off switch and includes a microphone clip and a zippered pouch.
  • Pneumatic shockmount system cuts down handling noise
  • Effective, built-in spherical wind and pop filter
  • Supplied with break-resistant microphone clip that rotates 180 degrees
  • High quality, rugged, and reliable
  • Cardioid dynamic
  • Frequency response: 50 Hz to 15 kHz
Suggested Applications Lead Vocals Backup Vocals Harmonica
Frequency Range 50 Hz to 15 kHz
Impedance 150 Ohms
Sensitivity -57.5 dBV/Pa at 1 kHz
Weight1.20 kg6.00 kg0.15 kg0.80 kg0.20 kg0.50 kg
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Weight 1.20 kg
Weight 6.00 kg
Weight 0.15 kg
Weight 0.80 kg
Weight 0.20 kg
Weight 0.50 kg