INTERM L-1400 AMPLIFIER 2X450W

	INTERM L-1400 AMPLIFIER 2X450W remove	DYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove	RCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER remove	InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm remove	TOA DA-250F CU Multichannel Power Amplifier 4Χ250W/4Ω remove	FOSTEX RM-2 Amplifier d-class (10W x 2) remove
Name	INTERM L-1400 AMPLIFIER 2X450W remove	DYNACORD DSA-8204 2 CHAN POWER AMPLFIER 2X600W/2Ω - 2X450W/4Ω - 2X270W/8Ω remove	RCF HPS 1500: CLASS H PROFESSIONAL POWER AMPLIFIER remove	InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm remove	TOA DA-250F CU Multichannel Power Amplifier 4Χ250W/4Ω remove	FOSTEX RM-2 Amplifier d-class (10W x 2) remove
Image
SKU	L-1400	E009302	HPS1500	V-1000	DA-250F CU	RM 2
Rating
Price	€1,193.61 €1,075.00 incl. GR VAT	€832.00 €754.00 incl. GR VAT	€806.00 €596.44 incl. GR VAT	€533.20 €330.26 incl. GR VAT	€1,550.00 €1,451.71 incl. GR VAT	€806.77 €435.00 incl. GR VAT
Stock	Available on backorder	Available on backorder	Available on backorder	In stock	In stock	In stock
Availability	Available on backorder	Available on backorder	Available on backorder	In stock	In stock	In stock
Add to cart	Add to cart	Add to cart	Add to cart	Add to cart	Add to cart	Add to cart
Description
Content	L1400 450W-450W 4ohm (280W-280W8ohm) COMPACT MODERN DESIGN Compact size (2U-Rack Height) with up to 1200W per channel@2ohms these amps save valuable rack space without compromising power output. HIGH CURRENT TOROIDAL TRANSFORMER A high-current toroidal transformer saves rack space and minimizes hum and noise. EXCELLENT SOUND QUALITY The low T.H.D.(0.05%) and high damping factor (400 or higher) gives excellent sound quality. 2 STAGE POWER SUPPLY The high-power units (L1800 and L2400) have a 2-Stage Class-H design that maximizes their performance. EQUIPPED WITH 30Hz or 50Hz HPF All amplifiers are equipped with high-pass filters on each channel to help maintain sound quality, yet help protect the loudspeakers. EXTENSIVE PROTECTION CIRCUITS Extensive protection circuits monitor over voltage/current conditions, overheating, output shorts, and DC voltage to improve performance and reliability. CLIP-LIMITER CIRCUITS Clip-limiters on each channel are provided to help prevent distortion due to excessive signal levels. L.E.D FUNCTION DISPLAYS Power, Clip limiter, Signal, Protection, Mode (Parallel/Stereo/Bridged) LEDs on the front panel indicate the status of the unit in operation.	Solid DYNACORD technology for fixed installations at very competitive prices. DSA power amplifiers offer a very high, stable output with high efficiency at a high performance level and are therefore the ideal choice for typical fixed installation applications. The connectivity consequently provides Phoenix type in/outs, the input level controls are located on the rear panel, also a switchable high-pass filter (50 Hz, 18 dB/oct) and a Ground Lift switch. The POWER REMOTE connector makes the task of remote controlling the power amplifier as well as switching it on and off simple. For further remote-supervision and –control possibilities and integration into IRIS-Net networks, an optional remote control module (RCM-810) is available.   AMPLIFIER SPECIFICATIONS Power output stereo 4Ω: 2 x 750 Watt rms   Power output stereo 8Ω: 2 x 450 Watt rms   Power output bridged 8Ω: 1500 Watt rms   Frequency Response: 20 Hz ÷ 20 kHz   Signal/noise rate: 106 dB   Damping factor: > 300   Slew rate: 50 V/μS   INPUT SECTION Input connector: xlr   Input sensitivity: 1.4 V (/ 32 – 26 dB) dBm/V RMS   Input impedance: 20 kΩ (balanced), 10 kΩ (unbalanced) kΩ   OUTPUT SECTION Output connector: Speakon   SYSTEM PARAMETERS Cooling: Forced   Amplifier class: H   POWER REQUIREMENT Operating voltage: 220 ÷ 240 V (50 / 60 Hz) V ~ Hz   PHYSICAL SPECIFICATIONS Height: 88/3.4 mm/inch   Width: 482/18.9 mm/inch   Depth: 420/16.5 mm/inch   Net Weight: 17/37.4 Kg/Lbs

 

InterM V-1000 Power amplifier 2Χ340W/4ohm, 2Χ180W/8ohm, 2Χ600W/2ohm bridge 1200W/4ohm 10-83kHz

high pass filter 30Ηz & 50Ηz

The DA-250F is a 4-Channel Digital Power Amplifier featuring lightweight, compact, high power output, and high efficiency. It delivers 250 W × 4 channels (4 Ω output) using a switching power supply. Each channel is equipped with an independent power section. It can be mounted in an EIA Standard equipment rack (1 unit size).

Specification *0 dB = 0.775 V

Power Source	120 V AC, 50/60 Hz
Amplification System	Class D
Power Consumption	200 W (based on UL/CSA standards) 1300 W (rated output 4 Ω × 4) 850 W (rated output 8 Ω × 4)
Input	4 circuits, +4 dB* (1.23 V) (input level control in maximum position), 10 kΩ, electronically-balanced, removable terminal block (3 pins) CH 1 mode ON/OFF switch (ON: CH 1 to All ch, OFF: Each ch)
Rated Output	4 channels: 250 W × 4 (4 Ω), 170 W × 4 (8 Ω) 2 channels (BRIDGE): 500 W × 2 (8 Ω) M4 screw terminal, distance between barriers: 8.8 mm
Frequency Response	20 - 20,000 Hz (±1 dB)
Total Harmonic Distortion	0.1% (1 kHz) 0.3% (20 - 20,000 Hz)
Protection Circuit	Protection against excessive current flow due to overload, short circuit, unusual DC voltage output, temperature rise at power amp. heat sink (110℃ or more), temperature rise inside the unit (80℃ or more)
S/N Ratio	100 dB (A-weighted)
Crosstalk	70 dB (A-weighted)
LED Indicator	Power (blue) × 1, Input (green) × 4, Output (yellow) × 4, Peak (red) × 4, Protect (red) × 4
Cooling	Forced air cooling
Operating Temperature	-10℃ to +40℃
Operating Humidity	90% RH or less (no condensation)
Finish	Panel: Aluminum, black, alumite Case: Plated steel sheet
Dimensions	482 (W) × 44 (H) × 401.8 (D) mm
Weight	6.6 kg
Accessory	Power cord (2 m) …1, Removable terminal plug (3 pins) …4, Tamper-proof cap …4

 

• Rack mount stereo powered monitor speaker system
• New AES/EBU digital input
• lndependent MUTE function
• Sophisticated control panel section
• Ideal where space is at a premium

RM-2 is the ideal solution for monitoring needs in various space-challenged environments such as machine rooms, VTR monitoring, surveillance, mobile and stationary control rooms, theme park applications where audio monitoring is needed and the room for installation is not enough. Adding these new feature sets, RM-2 is now more versatile to various applications.

• Stereo analog balanced +4DBu inputs with combo connectors (XLR & 1/4" plug).
• AES/EBU digital input with XLR connector working with fs 44.1kHz to 96kHz.
• Sophisticated control panel section including 26-dot stereo LED meter, biaxial stereo gain control, phone jack, Channel select switch as well as Input select switch.
• Independent MUTE function by holding down CH SEL key for a while.
• Auto Mute when powering on*.
• D-class power amplifier (10W x 2) for clear sound reproduction and light weight construction.
• Multi-voltage power supply.

Speaker Section

• Unit: 110 x 40mm cone type, magnetically shielded, x 2
• Impedance: 8 ohms
• Output SPL: 84 dB/W (1m)
• Frequency response: 200Hz to 20kHz

Amplifier Section

• Rated output power: 10W or more (8 ohms, 1kHz)
• Residual noise: -60 dBV or less (DIN AUDIO)
• Distortion: 0.5% or less (10W / 4 ohms, 1kHz)

Digital input

• Connector: XLR-3-31 type
• Digital input Format: IEC60958 (AES/EBU)
• Digital inputSampling frequency: 44.1kHz to 96 kHz
  

Analog input

• Connector: XLR / 1/4" combi-jack
• Analog input Nominal input level +4dBu (XLR), -10 DdBV (1/4“)
• Analog input Input impedance 10k ohms or more

Phones

• Connector: 1/4" stereo jack
• Applicable load imp. 8 ohms or more
• Rated output power 20mW + 20mW (32 ohms, 1kHz)

General

• External dimensions: 430(W) x 44(H) x 282(D) mm
• Weight: Approx. 3.5kg
• Power requirement: 100 - 240V~, 50/60Hz
• Power consumption: 10W

Weight14.40 kg12.60 kg20.00 kg10.30 kg7.00 kg3.50 kgDimensionsN/AN/AN/AN/AN/AN/AAdditional information

Weight	14.40 kg

Weight	12.60 kg

Weight	20.00 kg

Weight	10.30 kg

Weight	7.00 kg

Weight	3.50 kg