INTERM QD-4240 AMPLIFIER 4X60W

	INTERM QD-4240 AMPLIFIER 4X60W remove	ELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier remove	RAM AUDIO T-2408 Power Amplifier 8x300 Watts remove	ELECTRO VOICE PA 4150L Installation Power Amplifier 4 Channels, 2U 4 x 150 W remove	CROWN CT-475 POWER POWER AMPLIFIER 4X75W remove	INTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel remove
Name	INTERM QD-4240 AMPLIFIER 4X60W remove	ELECTRO VOICE CPS4.5 Contractor Precision Series 4-ch. Amplifier remove	RAM AUDIO T-2408 Power Amplifier 8x300 Watts remove	ELECTRO VOICE PA 4150L Installation Power Amplifier 4 Channels, 2U 4 x 150 W remove	CROWN CT-475 POWER POWER AMPLIFIER 4X75W remove	INTER-M SP-100 SYSTEM DIGITAL AMPLIFIER 60W 6 Channel remove
Image
SKU	QD-4240	004383	T-2408	001805	CT-475	SP-100
Rating
Price	€796.16 €717.00 incl. GR VAT	€2,294.00 incl. GR VAT	€1,860.00 €1,488.00 incl. GR VAT	€745.00 incl. GR VAT	€1,203.81 €1,160.00 incl. GR VAT	€1,016.79 €715.00 incl. GR VAT
Stock	Only 1 left in stock (can be backordered)	Available on backorder	Available on backorder	Available on backorder	Available on backorder	Available on backorder
Availability	Only 1 left in stock (can be backordered)	Available on backorder	Available on backorder	Available on backorder	Available on backorder	Available on backorder
Add to cart	Add to cart	Add to cart	Add to cart	Add to cart	Add to cart	Add to cart
Description
Content	Power Output Level: QD4240                      8ohm (Quad Ch)      40W      4ohm (Quad Ch)      60W                                                           8ohm bridged mono 120W Input Sensitivity (8ohm, 1kHz)  0.775Vrms Input Impedance 20kohm Balanced  Slew Rate (8ohm, Full Swing) ±30V/?sec Frequency Response (±0.5dB) 20kHz ~ 50kHz  T.H.D. (f=20Hz~20kHz, Half Power) 0.03%  Signal to Noise Ratio 105dB Damping Factor (8ohm, 1kHz)  100 Rasidual Noise  -85dB Channel Separation (8ohm, 1kHz)  80dB Voltage Gain (4ohm)  26dB 29dB 32dB Power Source  100-120VAC or 220-240VAC ; 50/60Hz (supplied AC mains transformer depends on country requirements) Power Consumption  300W 420W 770W Weight  11.5kg/25.3lb 15.5kg/34.2lb 17kg/37.5lb Dimensions  482(W) x 88(H) x 369(D) mm /19(W) x 3.5(H) x 14.5(D) in	mplifier Gain 32 dB (Lo-Z), 33 dB (70V), 36 dB (100V) Analog Inputs 4, electronically balanced, Phoenix-type Audio Network No CAN Bus Interface Yes (With Optional RCM-810 Card) Continuous Rated Power (1 kHz, THD 1%) 100v 500 Watts Continuous Rated Power (1 kHz, THD 1%) 2Ω 500 Watts Continuous Rated Power (1 kHz, THD 1%) 4Ω 500 Watts Continuous Rated Power (1 kHz, THD 1%) 70v 500 Watts Continuous Rated Power (1 kHz, THD 1%) 8Ω 250 Watts Continuous Rated Power (20-20 kHz, THD Continuous Rated Power (20-20 kHz, THD Continuous Rated Power (20-20 kHz, THD Continuous Rated Power (20-20 kHz, THD Cooling Front-to-Rear, continuously variable fans DIM 30 0.02 % Electronics Type Amplifier Frequency Response 15 Hz-30 kHz Input Impedance (Balanced) 20 kΩ Input Sensitivity 0 dBu (.775V)-2 Ω, +3 dBu (1.1V)-4/8 Ω, +6 dBu (1.55) 70V/100V Intermodulation Distortion (SMPTE) 0.05 % Mains Voltage 220 - 240 V, 50 - 60 Hz or 120 V, 50 - 60 Hz, 50 - 60 Hz Maximum Bridged Output 4Ω 1000 Watts Maximum Bridged Output 8Ω 1000 Watts Network Control (IRIS-Net) Optional Slew Rate 28 V/µs Total Harmonic Distortion 0.05 % Variable Load Drive (VLD) Yes Height 2RU 88.1 mm (3.47“) Width 481 mm (18.94“) Depth 421.5 mm (16.59“) Weight Net 11.1 kg (24.47 lbs)
	OUTPUT POWER	T-604	T-1204	T-1208	T-2408
	RMS, 1kHz, 1.0% THD+N
	4 ohms	4x 160 W	4x 320 W	8x 150 W	8x 300 W
	8 ohms	4x 115 W	4x 220 W	8x 100 W	8x 195 W
	Bridge @ 8ohms	2x 320 W	2x 640 W	4x 300 W	4x 600 W
	Pink Noise 12dB CF
	4 ohms	4x 210 W	4x 415 W	8x 180 W	8x 370 W

Frequency Response (power bandwidth ±0.25dB): 20Hz-20kHz

Phase Response (@1W 20Hz-20kHz): ±15deg

Total Harmonic Distortion (20Hz-20kHz):
Intermodulation Distortion (SMPTE):
Crosstalk (20Hz-20kHz): >70dB

Voltage Gain (selectable): 26/32/38 dB

Sensitivity: T604:1.5/0.8/0.4V - T1204:2.1/1.0/0.5V - T1208:1.4/0.7/0.4V - T2408:2.0/1.0/0.5V

Signal to noise ratio: T604:107dB - T1204:110dB - T1208:107dB - T2408:110dB

Required AC Mains (@8ohms 1/8 rated power): T604:1A - T1204:1.5A - T1208:1.4A - T2408:2.6A

Dimensions (WxHxD): 483x88.9x210 mm - 19x3.5x8.27 inches

Weight (Net): T604/T1204: 5.4Kg - 11.8Lbs T1208/T2408: 6.2Kg-13.5Lbs

Protections: Soft-start, Turn-on Turn-off muting, Over-heating, DC, RF, Short-circuit, Open or mismatched loads, Overloaded power supply, SSP™ and FCM™

Electro Voice PA 4150L features:

    * 100 Watts / 8 Ohms
    * 160 Watts / 4 Ohms
    * The amplifier channels can be bridged for more flexibility
    * Frequency response (-1dB): 10 Hz - 40 kHz
    * Signal-to-Noise Ratio: 100 dB
    * Provides excellent headroom for a wide dynamic range on music signals
    * Protection: audio limiters, high temperature, peak current limiters, turn-on delay
    * Marked level controls on the rear panel provide hidden reliable level adjustments for each channel
    * Front panel LEDs indicate signal present, 0 dB, and limit
    * Phoenix type connectors for inputs and outputs provide an easy rack wiring
    * Cooling: front-to-rear
    * Power requirements: 120V or 230V, 50 Hz - 60 Hz
    * Dimensions (WxHxD): 483 x 88 x 406 mm / 19" x 3.5" x 16"
    * Weight: 18 kg / 39.65 lbs

Model    CT475
Product Type    Amplifier
Channels    4
Sensitivity    1.4V
Rated Power Output    75W per Channel into 8 ohms
Signal to Noise Ratio (below rated power 20Hz to 20kHz, A-Weighted    110dB
Total Harmonic Distortion (THD) (full rated power, 20Hz - 20kHz)    Intermodular Distortion (from 0dB down to -40dB)    Frequency Response (at 1W into 4/8 ohms)    ± 0.5dB
Crosstalk (below rated power 20Hz to 1kHz)    > 70dB
Common Mode Rejection (20Hz to 1kHz)    > 55dB, typically > 70dB
Dimension (H x W x D)    1.75" x 19" x 14.25“
Weight    10 lbs (4.5 kg)